Sat-ip Nextpvr only finds 12 channels

[sub]

Unfortunately nether of those are what I'm looking for. I've not run tvheadend here - it's possible they don't log the info I wanted to see.

[Qvex23]

Do your tvheadend logs have rtsp tuning strings it's using? If so, we'll take a look what's different.

Any other suggestions where to Look for that Strings? Or what to do? Did you Try to access me Telestar through Firewall and NAT?

[Qvex23]

Ok, @Sub, I found a working String:

Code:

rtsp://172.27.0.11:554/?src=1&freq=11361&sr=22000&pol=h&msys=dvbs2&pids=0,6100,6110,6120,6121,6123,6122

This also works with my public IP and Portforwarding

[sub]

Was that port still open in your firewall? I just tried that url in VLC with your public address, but it didn't seem to be able to connect.

[Qvex23]

Was that port still open in your firewall? I just tried that url in VLC with your public address, but it didn't seem to be able to connect.

Maybe it is because i sometimes watch TV with TVHeadend and that URL starts a stream on Tuner 1. How can i select wich of the both tuners will we used when opening that URL?

[sub]

Was that port still open in your firewall? I just tried that url in VLC with your public address, but it didn't seem to be able to connect.

Maybe it is because i sometimes watch TV with TVHeadend and that URL starts a stream on Tuner 1. How can i select wich of the both tuners will we used when opening that URL?

Usually the tuner is chosen by the sat>ip device, and you don't get much say in which it uses. (I think some might support a "&tuner=x" paremeter on the url)

[Qvex23]

Was that port still open in your firewall? I just tried that url in VLC with your public address, but it didn't seem to be able to connect.

Maybe it is because i sometimes watch TV with TVHeadend and that URL starts a stream on Tuner 1. How can i select wich of the both tuners will we used when opening that URL?

Usually the tuner is chosen by the sat>ip device, and you don't get much say in which it uses. (I think some might support a "&tuner=x" paremeter on the url)

So the URL i send as PM is working Even via Public IP. Any Ideas why NextPVR wont find channels?

[sub]

So the URL i send as PM is working Even via Public IP. Any Ideas why NextPVR wont find channels?

I just tried that url again, and it's still not working remotely for me from VLC (using your public URL). If I could get it working remotely, then there is a possibility I can investigate why the scan isn't working.

Basically the device isn't liking something about the tuning strings coming from NextPVR. (the exact same strings are working fine with other SAT>IP devices, so some quirk of the Telestar devices that I'll need to work around)

2021-03-07 22:10:58.500 [VERBOSE][27]
PLAY rtsp://172.27.0.11/?src=1&freq=10729&sr=22000&pol=v&fec=23&msys=dvbs2&mtype=8psk&pids=0,16,17,18 RTSP/1.0
CSeq: 11
User-Agent: NextPVR
Session: 70B46B4A


2021-03-07 22:10:58.545 [VERBOSE][27] Got:
RTSP/1.0 400 Bad Request
CSeq: 11

[Qvex23]

So the URL i send as PM is working Even via Public IP. Any Ideas why NextPVR wont find channels?

I just tried that url again, and it's still not working remotely for me from VLC (using your public URL). If I could get it working remotely, then there is a possibility I can investigate why the scan isn't working.

Basically the device isn't liking something about the tuning strings coming from NextPVR. (the exact same strings are working fine with other SAT>IP devices, so some quirk of the Telestar devices that I'll need to work around)

2021-03-07 22:10:58.500 [VERBOSE][27]
PLAY rtsp://172.27.0.11/?src=1&freq=10729&sr=22000&pol=v&fec=23&msys=dvbs2&mtype=8psk&pids=0,16,17,18 RTSP/1.0
CSeq: 11
User-Agent: NextPVR
Session:  70B46B4A


2021-03-07 22:10:58.545 [VERBOSE][27] Got:
RTSP/1.0 400 Bad Request
CSeq: 11

Would a shell on my Server help you?