i have fine tuned and freqcopy & still no audio

[sub]

but still no audio on the gbpvr (for the channels 16-20)

I have been discussing this common PVR150 occurrance with Hauppauge.

Can you please post the exact Model and Rev of your capture device? Its printed on the tuner label on the board. Can you also tell me which country you have configured you capture source for, and whether you have selected Cable/Antenna?

Hopefully this info will help Hauppauge get to the bottom of it.

[buckeye]

The sticker says

[INDENT]ntsc/ntsc-j
26052
rev c199

it is made in malaysia [/INDENT]

I live in ohio ,usa
i have buckeye cable system

[stefan]

I thought you'd be an ohioan, from your nick. I lived in Zanesville for a year

[buckeye]

Today when i checked my recordings from last night
i have lost audio on another 2 channels
channel #7 & 8
it was working when i last checked it yesterday
but no audio on recordings and
no audio when i try to watch those channels

they still have audio on wintv2000

thanks

[buckeye]

I thought you'd be an ohioan, from your nick. I lived in Zanesville for a year

Yeah i live in toledo ohio

from zanesville to Stockholm, Sweden

[buckeye]

I would not recommend the registry tweak unless you really feel you have to. Since many versions of gbpvr you can enter the frequencies directly in the config app instead of channel numbers. That way you don't have to screw up the registry. For example, if you know that the frequency is 216Mhz, you enter 216000000

I was unable to find the frequency with any accuracy
i was able to write down the freq as tuning assistant was locking in the channels (ran it again to see if it would pick them up )

i was hoping to get and idea and then thru trial and error hopefully lock in a channel and go from there
i actually had no luck with that

then i have copied the hauppauge registry enteries and replaced the microsoft entries did this with and export of the haup and then rename of the location and then an import
and still no luck

any ideas
thanks

[buckeye]

replaced original entries from here
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\TV System Services\TVAutoTune\TS0-0]


with entries from here
[HKEY_LOCAL_MACHINE\SOFTWARE\Hauppauge\Channels\Library\0\1\0]\\

this is what ferq copy does right ?

[buckeye]

basically still no audio on channels 7, 8, & 16- 20
but still works in win tv 2000

[Suricatta]

Hi,

I have had a similar problem with the loss of audio, it has only just started to happen. So I assumed it was caused by the latest version. I re-installed several times and retuned several times to no avail. I have now reverted back to 93.10 and the audio is now working ok..... So far....... 2 days
If I have a problem with this version I will let you know.

[buckeye]

where can i download 93.10 from
to try that out