Lots of channels no TV and No EPG (Freesat over SAT>IP)

[PaulMc]

If that is the correct ffmpeg command then here's the file: https://drive.google.com/file/d/1QbQjeKU...sp=sharing

[mvallevand]

Thanks Martin

The '-t 60' seems to mess things up. Are you sure it is in seconds? The result was a very small file (<2k) that took less than a second to generate. I deleted that parameter and reran it which created the larger file. I terminated the run after around a minute.

Sub, will this do the job: https://drive.google.com/file/d/1U6F91nZ...sp=sharing ?

I thought -t 60 is correct but the file you made is good too.  Maybe it needs to be at the beginning?

Martin

[sub]

Thanks. I think these files are ok.

[PaulMc]

Thanks. I think these files are ok.

If you need anything more or different then please just let me know.

[mvallevand]

It's too bad that Open TV is not a superset of FreeSat, at least when it comes to FTA radio.

Martin

[sub]

Sorry - any chance of two updated files again? I'm just running out of live data in the previous files.

It's working pretty well with both Freesat and OpenTV now. I'm just starting the last phase of the changes, where I try to make sure its all wired up correctly so that'll work for a user with real broadcasts etc.

[PaulMc]

Sorry - any chance of two updated files again? I'm just running out of live data in the previous files.

Here you go:

https://drive.google.com/file/d/1nkDoUj2...sp=sharing

https://drive.google.com/file/d/1zYf-ynI...sp=sharing

Just for info, while recording these I saw several lines like below in the transcript. I'm not sure what these indicate. Is this normal or signs of poor tuner sensitivity, bad signal quality etc.?

[rtsp @ 0000022bbc75da40] max delay reached. need to consume packete+05x
[rtsp @ 0000022bbc75da40] RTP: missed 1 packets

I've also noticed that when recording sat channels there are pixel noise flashes every few minutes. I've included the screen shot of the status in case that is related or explains anything. Is the second image (from the Sat>IP docs) the correct interpretation of the status values?

[sub]

Sorry - any chance of two updated files again? I'm just running out of live data in the previous files.

Here you go:

https://drive.google.com/file/d/1nkDoUj2...sp=sharing

https://drive.google.com/file/d/1zYf-ynI...sp=sharing

Thanks

[sub]

Just for info, while recording these I saw several lines like below in the transcript. I'm not sure what these indicate. Is this normal or signs of poor tuner sensitivity, bad signal quality etc.?

[rtsp @ 0000022bbc75da40] max delay reached. need to consume packete+05x
[rtsp @ 0000022bbc75da40] RTP: missed 1 packets

I've also noticed that when recording sat channels there are pixel noise flashes every few minutes. I've included the screen shot of the status in case that is related or explains anything. Is the second image (from the Sat>IP docs) the correct interpretation of the status values?

These are the values being reported by the device, and the value ranges should be as shown in that SAT>IP doc. Looks like your signal is not perfect.

[PaulMc]

These are the values being reported by the device, and the value ranges should be as shown in that SAT>IP doc. Looks like your signal is not perfect.

Yeh, that's what I thought. Hopefully that data is still useful though.

I guess I'm going to have to find someone with a big ladder to check the cabling! ?

Interestingly there are reports on the web by others with the Telestar device that they've noticed a difference in tuner sensitivity between the two tuners in the box. I might have to swap them over and retest. The SNR and Signal Quality values don't appear great in TVHeadend.