Guide information not displaying on some channels

[three6zerocool]

Ok,    If I have configured OneDrive correctly, the following link should be my database file..

npvr.db3

Let me know what else you might require.

[three6zerocool]

Oh, and I did have one other observation.

In NextUI (UIdroid)     All the DVB-T channels require the 'double click' to navigate,  with the exception of the Trackside2 channel, which navigates fine.
Trackside2 is the channel that Kodi can not see the guide information.

[mvallevand]

It is the duplicate DVB issue but for all DVB channels but not each DVB show.

select count (unique_id) as duplicates, * from epg_event
group by channel_oid,start_time,end_time
order by duplicates desc

You probably will find the XMLTV entries for "SKY..." only need one key

Martin

[three6zerocool]

Yes, that is correct... only one key for the Sky channels.

All channels with prefix of Sky are from my STB with the exception of Sky Open which is a DVB-T channel.
Those STB Sky channels use data from an XMLTV file created with EPG Collector.

The XMLTV file actually also includes guide data for Sky Trackside2,  so can try selecting that guide source for the DVB-T Trackside2.
I just thought it was odd, as all the DVB-T channels were configured to use NexdtPVR's own guide downloading ability, and just that one channel was problematic in Kodi guide.

I did try disabling all transponder frequencies in NextPVR Gudie settings for DVB except 538000, but still no data showing in Kodi for that Trackside2 channel.

[mvallevand]

As I said all DVB channels have duplicates so basically whatever logic issue is sending bad data will manifest itself many ways. The proper workaround as suggested earlier is to only scan one frequency one the screen shown here https://forums.nextpvr.com/showthread.ph...#pid597303 to see if that helps. (after emptying the EPG)

Martin

[BrettB]

I did try disabling all transponder frequencies in NextPVR Gudie settings for DVB except 538000, but still no data showing in Kodi for that Trackside2 channel.

After you changed the NextPVR Guide transponder frequencies to only pull from one, did you also Empty EPG, do a reload EPG, and then test in the Guide screen to see if now it is only taking a single arrow press to go from show to show in those channels with the DVB source?