tuner reconized as IPTV Device unknown how to scan for channels?

[Steve123X]

Why not just download the drivers  in red here https://www.hauppauge.com/pages/support/...r1800.html and here https://www.hauppauge.com/pages/support/...r2250.html Maybe not 100% clear but try a little harder.

thats the drivers I DLed  in red. additionally I have the tuner cards physically inserted into the PCI slots however in BIOS the PCI slots are empty. when installing the drivers the error message is make sure the tuners are plugged in.

edit: now I haven't DLed the 2nd link you post for the 2250. just seams weird that the sys. thinks these tuners arn't in the sys. when  they physically are.
thanks

[sub]

Why not just download the drivers  in red here https://www.hauppauge.com/pages/support/...r1800.html and here https://www.hauppauge.com/pages/support/...r2250.html Maybe not 100% clear but try a little harder.

thats the drivers I DLed  in red. additionally I have the tuner cards physically inserted into the PCI slots however in BIOS the PCI slots are empty. when installing the drivers the error message is make sure the tuners are plugged in.

edit: now I haven't DLed the 2nd link you post for the 2250. just seams weird that the sys. thinks these tuners arn't in the sys. when  they physically are.
thanks

Maybe broken / non-functional devices.

[mvallevand]

That's why I suggested waiting for info from @briantho's post to see what Hauppauge suggests or just contact Hauppauge for yourself.

Martin

[Steve123X]

haugpage response
: "hello will the haugpage 1800 an 2250 work w/ windows 10. I'm wanting to use these tuners w/ NextPVR. these tuners worked fine w/ win7 media center.
I have installed these drivers
WinTV v7 installation package, version 3.9g
For Windows 10, 8, 7, Vista and XP
File name: wintv7_cd_3.9g.exe
File size: 151.4 MB
Date: 02/12/2015
please advise

".
arrowAgent Jerry H has received your message and will be right with you.
Jerry H11:38
Welcome steve. My name is Jerry H. Give me a minute to review your question. To better serve you, chat reps can view what you type in real time before you click "send." Only text you "send" is saved in your chat history.
hello will the haugpage 1800 an 2250 work w/ windows 10. I'm wanting to use these tuners w/ NextPVR. these tuners worked fine w/ win7 media center.
I have installed these drivers
WinTV v7 installation package, version 3.9g
For Windows 10, 8, 7, Vista and XP
File name: wintv7_cd_3.9g.exe
File size: 151.4 MB
Date: 02/12/2015
please advise

Jerry H11:39
Please note both boards are no longer supported, but both boards can work with Windows 10. Specially the HVR-2250, the HVR-1800 depends on the system as it uses a different PCIe gen type that is older and some systems might not recognise it.

looks like I'll have to order the silicon dust an connect though rj45 ethernet port. or this
https://www.hauppauge.com/pages/webstore...uadhd.html

[mvallevand]

Sounds like the 2250 should work my experience is the reception quality has been better than the HDHR.

Martin

[Steve123X]

yes I agree I've had the silicon dust home run an it was a bit scketchy at times w/ win7 media center where the haugapge never really cancel shows due to lose of signal.

I may have the 2250 in the wrong PCI slot so I'll exchange there are 2 shot slots an one long slot. can I plug the 2250 into the long slot? BC I've tryed both short slots thanks

[mvallevand]

You'd have to ask Hauppauge generally you can use short devices in long slots.

Martin

[Steve123X]

There is a related thread on this https://forums.nextpvr.com/showthread.php?tid=66516 so maybe wait to read what briantho hears.

The HDHR devices will work fine, but at the same time they aren't better at receiving than Hauppauge.  You can get multi-rec with Hauppauge.  Sounds like you are looking at used devices, personally I'd consider the ATSC 3 HDHR since it's a quad tuner.

Martin

is this your suggestion? https://shop.silicondust.com/shop/product/hdfx-4k/

https://www.ebay.com/itm/375617872370?_t...HJZMTFE5Q2

https://www.ebay.com/itm/375319119790?_t...T9PNEM4Y3Z

thanks

[mvallevand]

I make suggestions not recommendations. The Quatro you linked it is not ATSC 3 but is a good match for NextPVR. NextPVR doesn't support ATSC 3 directly anyway many ATSC 3.0 stations are now DRM'd and the audio is not PC friendly and hevc video is not web friendly. There is a chance that ATSC 1 will be sunset (ie not usable) so best to read up on that on the Silicondust forum.

Martin