MediaMVP problems.

[xanth]

I use a MediaMVP and find it quite slow and unresponsive. For instance, I press the skip forward button, nothing happens, I press the fast forward button, it jumps, then fast forwords, or sometimes does nothing again. Press the skip forward again, it tends to skip twice.... ahhhh.:mad:

[folkboat]

Running hardwired connection from GBPVR (v9413) box to MVP.
When the movie first starts all the remote functions pause/FF/skip work fine, after about an hour they don't work at all.

[HtV]

I use a MediaMVP and find it quite slow and unresponsive. For instance, I press the skip forward button, nothing happens, I press the fast forward button, it jumps, then fast forwords, or sometimes does nothing again. Press the skip forward again, it tends to skip twice.... ahhhh.:mad:

You could try changing the settings for ff/rw in the configaplication under "misc" - use shortskip instead of FF/RW.

[folkboat]

Changed the settings in config to ff/skip - same symptoms.
The MVP is still ignoring the transport commands.

[scott]

There is more about this here in MVP forum just do a search for my screen name..

real helpful Tipstir - now the poor guy's going to faced with two million tips and tricks authored by you! - kidding of course:p

[folkboat]

Buffer size was pre-set to 64k.
On-board nic "Realtek" RTL 8139 (Compaq Presario 6410 512mb memory)
Recorded video "medium" default setting.
Stored on 7200rpm 2mb cache drive d:
GBPVR running on seperate drive c:
Ran ping-t no lost data.
Hardwired 100mps ethernet/using crossover cable 20'
Flat Blue-High Vis Skin
"Shut Down" plug-in

[bluesxman]

Have you definately disabled/stopped both MVP services? They've been known to do funny things with ff/rw.

[folkboat]

Both Hauppauge services have been set to "manual" in the services menu.

[soccerdad]

Hey Tipster- You suggested:

"Default buffer is 8k, you should change that to 64kb which is the max."

Where do you set this?

[lucille84]

Tipstir..

Thanks for posting this MVP tweaks stuff

Before I begin to install them -- how do I get a backup copy of the settings so I can unwind the changes if my system barfs?

Thanks for patience with us newbies.

Lucille