Fusion 5 Lite - Failed to find BDA Device

[Zeus]

I'm having troubles adding a Fusion 5 Lite card. I followed the directionson

http://gbpvr.com/pmwiki/pmwiki.php/Confi...HDTVSource

Everything works within DVICO SW and I have all the proper channel information populating, but I cant get the system to play. I've downloaded GraphEdit and the BDA drivers seem to be loaded properly.

PC specs:
2.6 MHZ P4 with 512 GB RAM, 1 160 GB IDE, 2 320 SATA, Win XP (updated with all SPs), 1 PVR 250, 1 PVR 500CE, 1 Fushion Lite, 6600 NVidia, 50in Panny Plasma.

I'm on the latest release of GB-PVR with everything working like a charm. I've included my logs and some screenshots that I hope will help.

By the way Sub, great app!

Thanks in advance.[ATTACHMENT NOT FOUND]

[sub]

You logs dont actually contain an attempt to use the fusion device. Remember, the logs are over written each time you start GB-PVR. Try producing them again if you like, and I'll take another look.

One initial comment though, the fusion should be set up as device #1. You may have already done this correctly, but I thought I'd mention it since this confuses a few people if they have other capture devices.

[jtl32199]

Hello Zeus and Sub,

I have the same problem as Zeus. GBPVR is giving me the same error message when I tried to view fusion's channels. So I removed all the capture sources and reinstalled fusion (device #1) and it worked. However, when I reinstalled the PVR150 (device #2) together with fusion (device #1) the PVR150 doesn't work and the system gave me the same error message. I have attached all the logs cause I don't know which one to send.

Thanks!

[Zeus]

Setting the device to 1 resolved the issue. I was using 4 thinking that it had to be in sequence with the capture cards I already have set. Now all is working well.

Thanks.

[Zeus]

jtl32199,

The device value "1" and the capture card values seem to be seperate. Try setting your PVR to #1 capture card and see if that helps.

[sub]

Hello Zeus and Sub,

I have the same problem as Zeus. GBPVR is giving me the same error message when I tried to view fusion's channels. So I removed all the capture sources and reinstalled fusion (device #1) and it worked. However, when I reinstalled the PVR150 (device #2) together with fusion (device #1) the PVR150 doesn't work and the system gave me the same error message. I have attached all the logs cause I don't know which one to send.

Thanks!

Both your fusion device and the PVR150 should be device #1. You only end up increasing this value if you have multiple devices of the same type in the one machine.

[daphatty]

LOL!

Looks like I showed up to the party too late. I had the exact same problem back when I was testing the F5L for GBPVR. Glad to see you guys got it ironed out.

[jtl32199]

Thanks guys, that worked! I don't receive the error message anymore. However, when I try to record HD shows with Fusion channels, GBPVR will use PVR150 channels to record the shows. I notice that both the pvr150 channels and the Fusion channels have the same channel numbers. Is this what's causing the problem? Is so, how can I fix it?

Thanks again for the quick response!!

[sub]

When you try to schedule a recording, it'll start at the top of the capture source and work its way down looking for an available one that has the requested channel. I guess you have the PVR150 listed before the fusion.

[User]

Both your fusion device and the PVR150 should be device #1. You only end up increasing this value if you have multiple devices of the same type in the one machine.

Where exactly is this value set? Just curious for future reference as I forsee running into this in the future.

Thank you Sub for making all of this possible.