2006-01-15, 11:08 AM
After I was lucky that gbpvr made it once through EPG Channel Mapping, where it also constantly crashed (it scanned two or three channels, then windows offered me to send problem reports (one for drwatson?!) and after that I had to close Config manually), it now crashes when updating the EPG, still freezed after I was presented the send problem report window. Starting Watch LiveTV also crashes.
Hardware is KNC One TV-Station DVB-C, NForce4-board with Athlon X2 (binding config/gbpvr to one core doesn't help). Windows XP was freshly installed yesterday. MediaPortal crashes, too, but WatchTVProEx and ShowShifter work. The Original Software (GlobeDigital, a WinDVBLive OEM) works, but of course only with the WDM drivers.
bda.ini entries for KNC1 TV-Station DVB-C (with the MCE-DVB-T driver from the website, the 3rd-party BDA driver seems to be a generic philips one and is older and caused more problems) and Terratec Cinergy 1200 DVB-C (which are the same cards):
[KNC ONE TV-Station DVB-C]
TUNING_TYPE=DVB-C
FILTER_TUNER=KNC TV-Station DVB-C Tuner
FILTER_CAPTURE=KNC TV-Station DVB-C Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
[Terratec Cinergy 1200 DVB-C]
TUNING_TYPE=DVB-C
FILTER_TUNER=Cinergy 1200 DVB-C Tuner (BDA)
FILTER_CAPTURE=Cinergy 1200 DVB-C Capture (BDA)
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
Config.exe-native.log (using a self written tuner ini file, because my cable provider uses QAM256 on some channels):
11:31:46.000 INFO Log started
11:31:46.000 VERBOSE getSetting(OSDTransparency)
11:32:13.093 INFO BDARecorder:::StartRecording(KNC ONE TV-Station DVB-C, 1, c:\gbepg.mpg, T:S02,113000,6900,QAM64,8)
11:32:13.140 INFO Initializing DVB-C tuning request.
11:32:13.140 INFO tuning@1
11:32:13.140 INFO tuning@2
11:32:13.156 INFO tuning@3
11:32:13.156 INFO tuning@4
11:32:13.156 INFO tuning@5
11:32:13.156 INFO tuning@6
11:32:13.156 INFO tuning@7
11:32:13.156 INFO tuning@8
11:32:13.156 INFO tuning@8
11:32:13.171 VERBOSE getSetting(BDAMultiplexer)
11:32:13.281 VERBOSE ConnectPins: 'MPEG2-Transport' to 'MPEG-2 Stream'
11:32:13.281 VERBOSE getSetting(BDAUsePsiParser)
11:32:13.281 VERBOSE getSetting(EPGProcessingMode)
11:32:13.296 VERBOSE Creating Video pin mapped to PID 101
11:32:13.296 VERBOSE Creating Audio pin mapped to PID 102
11:32:13.890 VERBOSE Using DVR-MS mux
11:32:13.906 VERBOSE ConnectPins: 'Video' to 'in'
11:32:13.906 VERBOSE ConnectPins: 'out' to 'DVR In - 1'
11:32:15.140 VERBOSE ConnectPins: 'Audio' to 'DVR In - 2'
11:32:15.140 VERBOSE About to call pSink->LockProfile(NULL)
11:32:18.187 VERBOSE Target DVR-MS filename: c:\gbepg-1-2-3-4-5-6-7-8-9-10.dvr-ms
11:32:18.187 VERBOSE About to call pSink->CreateRecorder()
11:32:18.359 VERBOSE About to call pRecControl->Start(&rtStart)
11:32:18.843 VERBOSE locked=0 present=1 strength=255 quality=0
11:32:20.156 VERBOSE getSetting(ListGraphFilters)
11:32:20.156 VERBOSE Graph contains the following filters:
11:32:20.156 VERBOSE - BDA MPEG2 Transport Information Filter
11:32:20.156 VERBOSE - MPEG-2 Sections and Tables
11:32:20.156 VERBOSE - StreamBufferSink
11:32:20.156 VERBOSE - GB-PVR PSI Parser
11:32:20.156 VERBOSE - MPEG-2 Video Stream Analyzer
11:32:20.156 VERBOSE - MPEG-2 Demultiplexer
11:32:20.156 VERBOSE - KNC TV-Station DVB-C Capture
11:32:20.156 VERBOSE - KNC TV-Station DVB-C Tuner
11:32:20.156 VERBOSE - Microsoft DVBC Network Provider
11:32:20.156 VERBOSE getSetting(SaveGraphFiles)
11:32:20.421 VERBOSE pRecControl->GetRecordingStatus() returns 0x00000000, 1, 0
11:32:20.421 VERBOSE BDARecorder::StartRecording() finished
11:32:20.437 VERBOSE BDARecorder::ScanTransponder(T:S02,113000,6900,QAM64,8)
11:32:20.437 INFO ScanTransponder@1
11:32:20.437 INFO ScanTransponder@2
11:32:20.437 INFO DVB-C CarrierFrequency:113000 SymbolRate:6900 Modulation:3
11:32:20.437 INFO ScanTransponder@3
11:32:20.437 INFO tuning@7
11:32:20.437 INFO ScanTransponder@4
11:32:21.734 INFO ScanTransponder@5
11:32:21.859 VERBOSE locked=0 present=1 strength=0 quality=8
11:32:21.859 VERBOSE SIGNAL???
Hardware is KNC One TV-Station DVB-C, NForce4-board with Athlon X2 (binding config/gbpvr to one core doesn't help). Windows XP was freshly installed yesterday. MediaPortal crashes, too, but WatchTVProEx and ShowShifter work. The Original Software (GlobeDigital, a WinDVBLive OEM) works, but of course only with the WDM drivers.
bda.ini entries for KNC1 TV-Station DVB-C (with the MCE-DVB-T driver from the website, the 3rd-party BDA driver seems to be a generic philips one and is older and caused more problems) and Terratec Cinergy 1200 DVB-C (which are the same cards):
[KNC ONE TV-Station DVB-C]
TUNING_TYPE=DVB-C
FILTER_TUNER=KNC TV-Station DVB-C Tuner
FILTER_CAPTURE=KNC TV-Station DVB-C Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
[Terratec Cinergy 1200 DVB-C]
TUNING_TYPE=DVB-C
FILTER_TUNER=Cinergy 1200 DVB-C Tuner (BDA)
FILTER_CAPTURE=Cinergy 1200 DVB-C Capture (BDA)
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
Config.exe-native.log (using a self written tuner ini file, because my cable provider uses QAM256 on some channels):
11:31:46.000 INFO Log started
11:31:46.000 VERBOSE getSetting(OSDTransparency)
11:32:13.093 INFO BDARecorder:::StartRecording(KNC ONE TV-Station DVB-C, 1, c:\gbepg.mpg, T:S02,113000,6900,QAM64,8)
11:32:13.140 INFO Initializing DVB-C tuning request.
11:32:13.140 INFO tuning@1
11:32:13.140 INFO tuning@2
11:32:13.156 INFO tuning@3
11:32:13.156 INFO tuning@4
11:32:13.156 INFO tuning@5
11:32:13.156 INFO tuning@6
11:32:13.156 INFO tuning@7
11:32:13.156 INFO tuning@8
11:32:13.156 INFO tuning@8
11:32:13.171 VERBOSE getSetting(BDAMultiplexer)
11:32:13.281 VERBOSE ConnectPins: 'MPEG2-Transport' to 'MPEG-2 Stream'
11:32:13.281 VERBOSE getSetting(BDAUsePsiParser)
11:32:13.281 VERBOSE getSetting(EPGProcessingMode)
11:32:13.296 VERBOSE Creating Video pin mapped to PID 101
11:32:13.296 VERBOSE Creating Audio pin mapped to PID 102
11:32:13.890 VERBOSE Using DVR-MS mux
11:32:13.906 VERBOSE ConnectPins: 'Video' to 'in'
11:32:13.906 VERBOSE ConnectPins: 'out' to 'DVR In - 1'
11:32:15.140 VERBOSE ConnectPins: 'Audio' to 'DVR In - 2'
11:32:15.140 VERBOSE About to call pSink->LockProfile(NULL)
11:32:18.187 VERBOSE Target DVR-MS filename: c:\gbepg-1-2-3-4-5-6-7-8-9-10.dvr-ms
11:32:18.187 VERBOSE About to call pSink->CreateRecorder()
11:32:18.359 VERBOSE About to call pRecControl->Start(&rtStart)
11:32:18.843 VERBOSE locked=0 present=1 strength=255 quality=0
11:32:20.156 VERBOSE getSetting(ListGraphFilters)
11:32:20.156 VERBOSE Graph contains the following filters:
11:32:20.156 VERBOSE - BDA MPEG2 Transport Information Filter
11:32:20.156 VERBOSE - MPEG-2 Sections and Tables
11:32:20.156 VERBOSE - StreamBufferSink
11:32:20.156 VERBOSE - GB-PVR PSI Parser
11:32:20.156 VERBOSE - MPEG-2 Video Stream Analyzer
11:32:20.156 VERBOSE - MPEG-2 Demultiplexer
11:32:20.156 VERBOSE - KNC TV-Station DVB-C Capture
11:32:20.156 VERBOSE - KNC TV-Station DVB-C Tuner
11:32:20.156 VERBOSE - Microsoft DVBC Network Provider
11:32:20.156 VERBOSE getSetting(SaveGraphFiles)
11:32:20.421 VERBOSE pRecControl->GetRecordingStatus() returns 0x00000000, 1, 0
11:32:20.421 VERBOSE BDARecorder::StartRecording() finished
11:32:20.437 VERBOSE BDARecorder::ScanTransponder(T:S02,113000,6900,QAM64,8)
11:32:20.437 INFO ScanTransponder@1
11:32:20.437 INFO ScanTransponder@2
11:32:20.437 INFO DVB-C CarrierFrequency:113000 SymbolRate:6900 Modulation:3
11:32:20.437 INFO ScanTransponder@3
11:32:20.437 INFO tuning@7
11:32:20.437 INFO ScanTransponder@4
11:32:21.734 INFO ScanTransponder@5
11:32:21.859 VERBOSE locked=0 present=1 strength=0 quality=8
11:32:21.859 VERBOSE SIGNAL???