0 byte recording

[wannabepvr]

Sub,
I got a zero byte recording last night. I used to get the occasional one in the previous release but not since you added the 'try again' logic.

Anyway I though I would post the logs as there are a couple of error messages in there that might help.

Cheers!


[HTML]INFO BDARecorder:::StartRecording(Twinhan DVB-T (DVB-TV 878 Digital Tuner Driver), 2, K:\TV\media-recordings\MOVIE Pocahontas\MOVIE Pocahontas_20060325_18302015.mpg, T:C6,177500,0,0,7~P:1328~V:769~A:770~PMT:768~TXT:772~N:>7 Digital)
18:28:00.187 INFO Initializing DVB-T tuning request.
18:28:00.187 INFO tuning@1
18:28:00.187 INFO tuning@2
18:28:00.187 INFO tuning@3
18:28:00.187 INFO tuning@4
18:28:00.187 INFO tuning@5
18:28:00.187 INFO tuning@6
18:28:00.187 INFO tuning@7
18:28:00.187 INFO tuning@8
18:28:00.203 INFO tuning@8
18:28:00.203 VERBOSE getSetting(BDAMultiplexer)
18:28:00.218 VERBOSE getSetting(BDAAutoDetectTuner)
18:28:00.234 VERBOSE ConnectPins: 'Output1' to 'MPEG-2 Stream'
18:28:00.234 VERBOSE Demux filter has the following default output pins:
18:28:00.234 VERBOSE - 1
18:28:00.234 VERBOSE has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {E9DD31A3-221D-4ADB-8532-9AF309C1A408}
18:28:00.234 VERBOSE - 2
18:28:00.234 VERBOSE has media type: {73646976-0000-0010-8000-00AA00389B71} {E06D8026-DB46-11CF-B4D1-00805F6CBBEA} (VIDEO)
18:28:00.234 VERBOSE - 3
18:28:00.234 VERBOSE has media type: {73647561-0000-0010-8000-00AA00389B71} {E06D802B-DB46-11CF-B4D1-00805F6CBBEA} (AUDIO)
18:28:00.234 VERBOSE - 4
18:28:00.234 VERBOSE has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {E436EB8E-524F-11CE-9F53-0020AF0BA770}
18:28:00.234 VERBOSE - 5
18:28:00.234 VERBOSE has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {C892E55B-252D-42B5-A316-D997E7A5D995}
18:28:00.234 VERBOSE getSetting(BDAUsePsiParser)
18:28:00.234 VERBOSE getSetting(EPGProcessingMode)
18:28:00.250 VERBOSE getSetting(BDAAutoMapPids)
18:28:00.250 VERBOSE Creating Video pin mapped to PID 769
18:28:00.250 VERBOSE ConnectPins: 'Video' to 'Input'
18:28:00.250 VERBOSE Creating Audio pin mapped to PID 770 (MPEG1 Layer 2)
18:28:00.250 VERBOSE getSetting(EnableTeleText)
18:28:00.250 VERBOSE Mapping Teletext PID 772
18:28:00.265 VERBOSE FindFilterByName failed to locate filter: GB-PVR WST SRT Digital
18:28:00.265 VERBOSE Initialzing Cyberlink mux
18:28:00.265 VERBOSE Setting IID_IMpgMuxer
18:28:00.265 VERBOSE Setting IID_IMpgMuxer3
18:28:00.265 VERBOSE Setting IID_IMpgMuxerInfo
18:28:00.265 VERBOSE Finished initialzing Cyberlink mux
18:28:00.281 VERBOSE ConnectPins: 'Output' to 'Video In'
18:28:00.281 VERBOSE ConnectPins: 'Audio' to 'Audio In'
18:28:00.281 VERBOSE ConnectPins: 'Output' to 'Input'
18:28:00.484 VERBOSE locked=0 present=0 strength=0 quality=0
18:28:00.703 ERROR Failed to start BDA Graph
18:28:00.703 VERBOSE ERROR_BUSY & DIERR_ACQUIRED
18:28:00.703 VERBOSE getSetting(ListGraphFilters)
18:28:00.703 VERBOSE Graph contains the following filters:
18:28:00.703 VERBOSE - MPEG-2 Sections and Tables
18:28:00.703 VERBOSE - BDA MPEG2 Transport Information Filter
18:28:00.703 VERBOSE - GB-PVR Writer
18:28:00.703 VERBOSE - GB-PVR PSI Parser
18:28:00.703 VERBOSE - CyberLink MPEG Muxer
18:28:00.703 VERBOSE - GB-PVR Flow Status
18:28:00.703 VERBOSE - MPEG-2 Demultiplexer
18:28:00.703 VERBOSE - DTV-DVBT 878 Digital Capture Filter
18:28:00.703 VERBOSE - DTV-DVBT 878 Digital Tuner Filter
18:28:00.703 VERBOSE - Microsoft DVBT Network Provider
18:28:00.703 VERBOSE getSetting(SaveGraphFiles)
18:28:00.703 VERBOSE BDARecorder::StartRecording() finished
18:28:25.890 VERBOSE BDARecorder::StopRecording()
18:28:25.984 VERBOSE BDARecorder::StopRecording() finished[/HTML]

[wannabepvr]

My Twinhan BDA drivers are still at 1.2.2.7 if that helps.