Unable to tune some channels on DVB-S

[CFC]

I have an issue with tuning into certain channels. It seems to affect channels that have two SID but otherwise same tuning info.
Attached is a snippet of my scan.cache file:

T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:111~V:6690~A:6691~L:eng~PMT:33~E:T~PCR:6690~N:>DIY
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:113~V:4898~A:4899~L:eng~PMT:33~E:T~PCR:4898~N:>FLVNG
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:152~V:7202~A:7203~L:eng~PMT:33~E:T~PCR:7202~N:>CBS C
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:190~V:5922~A:5923~L:eng~PMT:33~E:T~PCR:5922~N:>REAL
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:191~V:7458~A:7459~L:eng~PMT:33~E:T~PCR:7458~N:>G4
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:207~V:6178~A:6180~L:eng~PMT:33~E:T~PCR:6178~N:>CNBCW
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:400~V:5154~A:5155~L:eng~PMT:33~E:T~PCR:5154~N:>TENIS
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:835~V:6946~A:6947~L:eng~PMT:33~E:T~PCR:6946~N:>TMNDO
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:844~V:5410~A:5411~L:eng~PMT:33~E:T~PCR:5410~N:>DOMIN
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:850~V:4386~A:4387~L:eng~PMT:33~E:T~PCR:4386~N:>HISTE
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:854~V:6434~A:6435~L:eng~PMT:33~E:T~PCR:6434~N:>ESPND
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:876~V:6690~A:6691~L:eng~PMT:33~E:T~PCR:6690~N:>DIY (Audio #2)
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:892~V:6178~A:6180~L:eng~PMT:33~E:T~PCR:6178~N:>CNBCW (Audio #2)
T:12282,V,20000,56~NID:4102~ONID:4102~TSID:205~P:9264~V:4130~A:4131~L:eng~PMT:33~E:T~PCR:4130~N:>WSIU

As you can see for "DIY" I have two of them, one with P:111 and the other P:876. When I try to tune to either one, my MDplugin shows that I'm jumping channels between 111 and 876 and can never get a signal.

Is there something I can do about this?

Thanks,
CFC

[soccerdad]

I can confirm that this is an issue that I have never been able to solve. Would also love some insight as well. I even tried editing out the duplicate from the cache and it still does it. I am not sure where the plugin gets it info from. It could also be a wrapper problem, or???

[sub]

Create a c:\temp directory, then set HKEY_LOCAL_MACHINE\Software\Devnz\LogPSIProcessing=1 (DWORD), then watch one of these channels for 15 seconds, then zip and attach the c:\temp\psi.log file. After that, delete the registry setting.

[soccerdad]

I am going out of town in a few minutes so I will do it in a couple of days of CFC does not get to it first. Thanks for looking into this.

[CFC]

Create a c:\temp directory, then set HKEY_LOCAL_MACHINE\Software\Devnz\LogPSIProcessing=1 (DWORD), then watch one of these channels for 15 seconds, then zip and attach the c:\temp\psi.log file. After that, delete the registry setting.

Done!
I started by first tuning to a station that works (sid 140) and then tuning to the problematic station (sid 111).
I did this twice, once with and once without BDAParseDishNetEIT (sp?) active.

Thanks for the help,
CFC

[sub]

Try the attached patch. I'm pretty sure it'll fix it, but if it doesnt, create and post a new psi.log and I'll take another look.

[CFC]

Try the attached patch. I'm pretty sure it'll fix it, but if it doesnt, create and post a new psi.log and I'll take another look.

Works like a charm . That was really really fast!
That's awesome, thanks. Will this be updated in subsequent releases or should I hold on to this version of it?

Is the "BDAParseDishNetEIT" entry meant to be used when one would like to grab the EPG straight from the stream?

Thanks again for the incredibly quick help,
CFC

[sub]

Works like a charm . That was really really fast!
That's awesome, thanks. Will this be updated in subsequent releases or should I hold on to this version of it?

Great. It'll be included with all later releases.

Is the "BDAParseDishNetEIT" entry meant to be used when one would like to grab the EPG straight from the stream?

Yes.

[soccerdad]

Thanks

[CFC]

sub,

was the fix your provided in this thread implemented in the new 1.2.13 release?
I didn't see a mention of it in the update information, so I was making sure before I went ahead and upgraded.

Thanks for the help,
CFC