VisaView 2020 can't be detected

[microkid]

I have a Hauppauge PVR150 and VistaView 2020. The PVR150 is detected fine in Config, the VistaView not. I noticed there are some VistaView Saber 2020 listed in direct.ini but for some reason my card is not detected.
I use the 1037.0.2.1 drivers from VistaView.
I attached the filtercheck log. Any chance of sorting this out?

Update:
I edited the direct.ini using the filtercheck and it seems to be working now.

[VistaView Saber 2020 (dual#1)]
INIT_MODE=VIXS
INIT_MSP=0
BLACKBIRD=1
FILTER_CROSSBAR=7162 (0) BDA Analog Xbar
FILTER_CAPTURE=7162 (0) BDA Analog Capture
FILTER_TV_TUNER=7162 (0) BDA Analog TV Tuner
FILTER_TV_AUDIO=7162 (0) BDA Analog TV Audio
FILTER_CAPTURE_AUDIO=7162 (0) BDA Audio Capt
FILTER_ENCODER=7162 (0) BDA MPEG PS Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audioinput
PIN_CAPTURE_I2S_OUT=I2S Audio
PIN_CAPTURE_656_OUT=Analog ITU Video
PIN_ENCODER_I2S_IN=I2S Audio
PIN_ENCODER_656_IN=Analog ITU Video
PIN_ENCODER_OUT=MPEG2 Program
PIN_WRITER_INPUT_IN=Input


[VistaView Saber 2020 (dual#2)]
INIT_MODE=VIXS
INIT_MSP=0
BLACKBIRD=1
FILTER_CROSSBAR=7162 (1) BDA Analog Xbar
FILTER_CAPTURE=7162 (1) BDA Analog Capture
FILTER_TV_TUNER=7162 (1) BDA Analog TV Tuner
FILTER_TV_AUDIO=7162 (1) BDA Analog TV Audio
FILTER_CAPTURE_AUDIO=7162 (1) BDA Audio Capt
FILTER_ENCODER=7162 (1) BDA MPEG PS Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audioinput
PIN_CAPTURE_I2S_OUT=I2S Audio
PIN_CAPTURE_656_OUT=Analog ITU Video
PIN_ENCODER_I2S_IN=I2S Audio
PIN_ENCODER_656_IN=Analog ITU Video
PIN_ENCODER_OUT=MPEG2 Program
PIN_WRITER_INPUT_IN=Input

SUB, can you verify the ini settings?

[Gameross]

Same.

[sub]

Ok, I'll include these definitions in the master direct.ini file for the next release.

[Gameross]

I ended up reverting to the previous drivers and got it working.

[jfm]

I ended up reverting to the previous drivers and got it working.

So, how is it doing for you?