fusion hdtv dual digital 4

[dave.t]

Hi everyone
I cant seem to get the dual digital 4 to work on gbpvr
Im using the following in the bda.ini file
[Dvico Fusion Dual Digital USB1]
TUNING_TYPE=DVB-T
FILTER_TUNER=Bluebird, BDA Tuner1
FILTER_CAPTURE=Bluebird, WDM TsCapture1
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

[Dvico Fusion Dual Digital USB2]
TUNING_TYPE=DVB-T
FILTER_TUNER=Bluebird, BDA Tuner2
FILTER_CAPTURE=Bluebird, WDM TsCapture2
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

using the filter check i do see the bda tuner1 and 2 and the bluebird wdm TsCapture1 and 2
When I set it up I can use the EPG but when I goto map it on either I get an error saying
Gbpvr was unable to start the BDA device you configured, check the device is properly configured, and not already in use.
In the safely remove icon in the task bar you can see the two USB capture.
Any help would be greatly appreciated

[sub]

using the filter check i do see the bda tuner1 and 2 and the bluebird wdm TsCapture1 and 2
When I set it up I can use the EPG but when I goto map it on either I get an error saying
Gbpvr was unable to start the BDA device you configured, check the device is properly configured, and not already in use.

Reproduce this problem then zip and attach your logs and I'll take a look

Make sure the device number is set to #1

[dave.t]

Sorry Sub
Been away for a couple of days.
Here is the logs
Thanks for your help
Dave

[dave.t]

hi
Has anyone had a chance to look at this.
Any thoughts?
Dave

[sub]

For some unknown reason the tuner and capture filters for this device are refusing to connect. Are you sure the device isnt in use by some other software in the machine?

2008-06-12 13:43:44.921 ERROR Connect failed: 0x80004005

[dave.t]

I have tried turning off the fusion icon in the tray but apart from that I don't know where else to look. I even looked at the processes using ctrl alt delete and stopped everything to do with fusion.
Any ideas where to go from here.
thanks for your help
Dave

[ArtificialIntel2]

try Process Monitor from Microsoft.

http://technet.microsoft.com/en-us/sysin...96645.aspx

If the above link doesn't show, Google for it.

Regards

AI

[dave.t]

After reading some other areas I found that you might need to load bluebird.sys in the windows/system32/drivers folder.
When I did a search there was no bluebird.sys on my computer. There is a bluebird2.sys.
Should I see if I can find the bluebird.sys driver and add it ?
thanks
Dave

[dave.t]

Hi
Here is the filter log just in case I did have the wrong settings at the start of this thread.
thanks
Dave

[mickzed]

Hi Dave, Sub,

I am also seeing this problem. Has a resolution been found?