Digital Devices Cine C2T2 not working

[Traxx83]

Hello,

after tvmosaic is dead now for quite a while and the activation of their EPG-Service (the integration of native EPG is crap) no longer worked after I upgraded my hardware, I wanted to switch to NextPVR.
But it doesn't find any channels... The card (all four tuners) are found, but when I start a channel search nothing happens, no error etc.

Log files are attached:
  logs-20200624-1356.zip (Size: 32.04 KB / Downloads: 4)
...but they don't say a lot either...

2020-06-24 13:46:37.317 [DEBUG][4] Tuning:
<tuning>
  <type>DVB-C</type>
  <locator>
    <frequency>346000</frequency>
    <bandwidth>8</bandwidth>
    <symbol_rate>6900</symbol_rate>
    <modulation>QAM64</modulation>
  </locator>
</tuning>

2020-06-24 13:46:37.356 [DEBUG][4] StartStream(): c:\temp\test.ts
2020-06-24 13:46:37.426 [DEBUG][4] Using tuner: Digital Devices DVB-C Tuner 7 (1)
2020-06-24 13:46:37.426 [DEBUG][4] About to connect...
2020-06-24 13:46:37.426 [DEBUG][4] has network provider
2020-06-24 13:46:37.426 [DEBUG][4] has tuner
2020-06-24 13:46:37.473 [INFO][4]             [8b884e00-fbca-11de-b16f000000004d56]-00030007-00000000
2020-06-24 13:46:37.473 [DEBUG][4] About to auto detect capture filter...
2020-06-24 13:46:37.473 [INFO][4] Need match: [8b884e00-fbca-11de-b16f000000004d56]-00030007-00000000
2020-06-24 13:46:37.473 [DEBUG][4] dw1=00030007 vs 00030007
2020-06-24 13:46:37.473 [DEBUG][4] Got capture filter: 'Digital Devices TS Capture 7'
2020-06-24 13:46:37.473 [INFO][4] medium:    [8b884e00-fbca-11de-b16f000000004d56]-00030007-00000000
2020-06-24 13:46:37.473 [DEBUG][4] Added capture filter
2020-06-24 13:46:37.504 [DEBUG][4] Connected Tuner to Capture
2020-06-24 13:46:37.583 [DEBUG][4] ConnectPins failed: hr = 80040217
2020-06-24 13:46:37.583 [ERROR][4] Failed to connect capture -> ts monitor
2020-06-24 13:46:37.583 [DEBUG][4] ConnectPins failed: hr = 80040209
2020-06-24 13:46:37.598 [DEBUG][4] Graph filter list:
2020-06-24 13:46:37.598 [DEBUG][4] - MPEG-2 Sections and Tables
2020-06-24 13:46:37.598 [DEBUG][4] - BDA MPEG2 Transport Information Filter
2020-06-24 13:46:37.598 [DEBUG][4] - MPEG-2 Demultiplexer
2020-06-24 13:46:37.598 [DEBUG][4] - NPVR TS Mon
2020-06-24 13:46:37.598 [DEBUG][4] - Capture
2020-06-24 13:46:37.598 [DEBUG][4] - Tuner
2020-06-24 13:46:37.598 [DEBUG][4] - Network Provider
2020-06-24 13:46:37.598 [DEBUG][4] Starting graph...
2020-06-24 13:46:37.608 [DEBUG][4] Failed to start device: 0x80004005
2020-06-24 13:46:37.608 [ERROR][4] Device failed to start
2020-06-24 13:46:37.609 [DEBUG][4] Removing filter  MPEG-2 Sections and Tables
2020-06-24 13:46:37.609 [DEBUG][4] Removing filter  BDA MPEG2 Transport Information Filter
2020-06-24 13:46:37.610 [DEBUG][4] Removing filter  MPEG-2 Demultiplexer
2020-06-24 13:46:37.610 [DEBUG][4] Removing filter  NPVR TS Mon
2020-06-24 13:46:37.611 [DEBUG][4] Removing filter  Capture
2020-06-24 13:46:37.612 [DEBUG][4] Removing filter  Tuner
2020-06-24 13:46:37.612 [DEBUG][4] Removing filter  Network Provider
2020-06-24 13:46:37.613 [DEBUG][4] Failed to StartStream. Device failed to start

Even as someone who works in IT I'm totally lost here and quite confused that nobody else seems to have ever had that problem...

Ps: tvmosaic is still installed (as long as nextPVR isn't working), but the service is disabled

[Traxx83]

Now I tried with a old cheap usb tuner I found in my magic box. With this it starts scanning and shows the frequencies in the search channels dialogue. So the fault is definately with the Digital Devices Tuners. (At least for germany the best product, as they decrypt by themselves using the attached CI, no need for CI configuration on the software side)

[mvallevand]

Well actually a very similar problem was posted and sub's analysis was here https://forums.nextpvr.com/showthread.ph...#pid509083 I suggest you download FilterCheck https://github.com/sub3/NextPVR/wiki/FilterCheck and zip and send the results.

Martin

[Traxx83]

Thanks, here you go


  FilterCheck.log.zip (Size: 687 bytes / Downloads: 4)

br Robert

[mvallevand]

Does your device actually support four DVB-C tuners or just two?

Martin

[Traxx83]

Does your device actually support four DVB-C tuners or just two?   

Martin

Hi!
I supports four tuners. It has four physical tuners on there. Actually 8, four DVB-C and four DVB-T, but I disabled the T recorders in the digital devices control panel as I don't need them.

[sub]

Have you got the most recent Digital Devices drivers installed? They changed the behaviour and names of a few components a year or so back, and it causes problems for the occasional user.

[Traxx83]

Have you got the most recent Digital Devices drivers installed? They changed the behaviour and names of a few components a year or so back, and it causes problems for the occasional user.

Now I have on the new system. But a few days ago I already tried out nextpvr on the old system, where I didn't update the drivers for years...
I've still got the old system and even a spare DD tvcard. Should I try a certain driver version on that? Or is there anything else I can try? On that old non productive system I can mess around

[sub]

The best cause of action is to try the most recent drivers. If that still doesn't work, post the logs showing an attempt to use the tuner, and the filtercheck.log, and I'll try to provide an updated file to get it working for you.

[Traxx83]

The best cause of action is to try the most recent drivers. If that still doesn't work, post the logs showing an attempt to use the tuner, and the filtercheck.log, and I'll try to provide an updated file to get it working for you.

They are in Post #1 und #4. Can I do anything that there is more shown in them? Like debug mode etc?

And yes, I'm using the latest drivers now.