trouble with gbpvr.cgi

[ryanmc]

i have afresh install and am having trouble with my gbpvr.cgi. the first time i load it i get "mkdir cannot create director" if i go to source and reload the cgi for a second time it works then. not sure why it takes two tries.

#!/bin/sh

echo "Content-Length: 29";
echo "Content-type: text/html";
echo "";

cd ~
if [ -f /etc/mvpmc/mvpmcx2 ]
then
echo "mvmcx2 is loaded";
else


mkdir /etc/mvpmc
mount -t cifs //192.168.1.7/mvpmc /etc/mvpmc -o username=root,rw
mkdir /mnt/O:\\DVD
mount -t cifs //192.168.1.7/DVD /mnt/O:\\DVD -o username=root,rw
cp /etc/mvpmc/utelnetd /usr/bin
ln -s /lib/librmjpeg.so /lib/libjpeg.so.62
ln -s /lib/librmzlib.so /lib/libz.so
ln -s /lib/librmzlib.so /lib/libz.so.1
ln -s /lib/librmzlib.so /lib/libz.so.123
utelnetd -l /bin/sh -p 23 &
echo "Telnetd started on port 23............";
fi
killall gaya
sh -c /etc/mvpmc/startmeup 2>/dev/null >/dev/null &
exit 0;

[mvallevand]

You've got two mkdir commands, my guess is there is an error in the second one or it wouldn't run, Maybe your cgi is bad ie edited with a non-linux editor or the syntax is wrong, try

mkdir /mnt/O\:\\DVD
mount -t cifs //192.168.1.7/DVD /mnt/O\:\\DVD -o username=root,rw

Martin

[ryanmc]

if i take out the the dvd mount it works so i was thinking syntax too. funny thing is that the 2nd time it loads and im able to play the dvds from the dvd mount. i use editpad lite. i tried changing the syntax as above same result. ive somewhat gotten use to having to load 2 times but would be nice if i could figure it out. thanks

[mvallevand]

Compress and upload your cgi file and I will have a look

Martin

[ryanmc]

thanks martin

[mvallevand]

I tried this on my system (only changing the IP and the source sharename from DVD to one I have) and it works without any errors. If you run with a hard disk, maybe you need to clear the cache? Otherwise I don't have any logical explanation of why this isn't working or the rather odd error

Martin

[ryanmc]

thanks again martin for taking the time. i dont think i tried clearing the cache yet, if not il try changing the path or something like that. i also tried changing the order of the mounts and it had same trouble.

[ryanmc]

cleared the cache same thing . i changed the path from O to Q and it worked . weird. thanks again