PVR350 with nPVR

[tkgafs]

Hello,

its a long time since I have been on here, but I need some help getting my old hauppauge PVR 350 working with nPVR

I am running on windows XP and live tv displays a picture ok but I get no audio, but if I play back music, that plays correctly

I can also happily play old mpg recording I made with gbpvr without problems

I have tried selecting various audio decoders in both mpeg1 audio decoder and ac3 decoder but still hear nothing

on my system I feed the svideo input on the pvr350 from a settop box and change channels using its remote

I also know the pvr350 is receiving audio as I recorded using gbpvr earlier which had audio but the recordings stop after about a minute for some reason, which is why I troed to upgrade to npvr

how do I set the channels picked up from xmltv file to use the composite input rather than the tuner

this forum has always been helpful in the past so here's hoping someone can help me out again

thanks

Tkgafs

[kayleigh]

I think PVR350 output support officially ended with GB-PVR version 0.9x (around late 2007), but it's still OK for recording. The audio is encoded in MP1 or MPA, I think (It's been a while since I used my PVR350), but not AC3. So, if you're using the PVR350 for decoding, the mpeg format needs to be kind of specific.

Sub had a lot of issues with his hardware and lots of other issues were reported, thus the support ended, which made me sad, too. (I loved my PVR350. ) So I guess my recommendation is to stay with GB-PVR if it worked for you.

[sub]

PVR350 should work like any other capture card. You just cant use the TV Out feature. This aspect of the drivers had major issues.

I am running on windows XP and live tv displays a picture ok but I get no audio

That'll definitely come down to the decoders. Specifically, try other MPEG1 Layer II decoders.

how do I set the channels picked up from xmltv file to use the composite input rather than the tuner

When you hit the import channels button, it has a drop down with the input to use.