FritzBox 6490 - No Server found

[Rickman74]

Hello,

since yesterday, my four Tuners of the FritzBox Cable 6490 are gone.
Several restarts of the NextPVR- Server and of the Router I give up. Nothing happens, when clicking on "Rescan for Devices".

I tried another Software to verify, that the Router is not defective and with MediaPortal2- TV Server I can see all Tuners and I'm getting all Channels.
Im running the NextPVR- Server on Windows 10 in Version: 6.1.4.230625
FritzBox is running with FritzOS 7.57

I attached some logs.

Cheers,
Richy

[sub]

Code:

2023-09-14 10:37:19.832    [DEBUG][1]    Starting SAT>IP discovery
2023-09-14 10:37:19.859    [DEBUG][1]    local address: 192.168.1.200
2023-09-14 10:37:19.873    [DEBUG][8]    From: 192.168.1.1
2023-09-14 10:37:19.873    [DEBUG][8]    HTTP/1.1 200 OK
Cache-Control: max-age=1800
Location: http://192.168.1.1:49000/satipdesc.xml
Server: FRITZ!Box 6490 Cable UPnP/1.0 AVM FRITZ!Box 6490 Cable 141.07.57
Ext:
ST: urn:ses-com:device:SatIPServer:1
USN: uuid:663d5d6c-f9f8-4bb4-84d4-C80E148DE305::urn:ses-com:device:SatIPServer:1

It seems to be detecting a device. Is it not listed on the Settings->Devices page?

[Rickman74]

No, Just my IPTV Devices. Not even one Tuner of my 6490.

[sub]

If you open http://192.168.1.1:49000/satipdesc.xml in your browser, what does it return?

[sub]

Actually, I think it is because your device is returning "Location:" and it's expecting "LOCATION:". In the specification it's uppercase.

Code:

2023-09-14 10:37:19.873    [DEBUG][8]    HTTP/1.1 200 OK
Cache-Control: max-age=1800
Location: http://192.168.1.1:49000/satipdesc.xml
Server: FRITZ!Box 6490 Cable UPnP/1.0 AVM FRITZ!Box 6490 Cable 141.07.57
Ext:
ST: urn:ses-com:device:SatIPServer:1
USN: uuid:663d5d6c-f9f8-4bb4-84d4-C80E148DE305::urn:ses-com:device:SatIPServer:1

You could see if the attached patch helps. (replace your existing file of the same name)

[mvallevand]

This is not the first thread on this problem there was a drive by post recently https://forums.nextpvr.com/showthread.php?tid=65004

Martin

[sub]

This is not the first thread on this problem there was a drive by post recently https://forums.nextpvr.com/showthread.php?tid=65004

Martin

Yes, that one seems to be the same. I suspect the manufacturer changed the case of this "LOCATION" in a recent firmware.

[Rickman74]

If you open http://192.168.1.1:49000/satipdesc.xml in your browser, what does it return?

Here's what I get:

Code:

<root xmlns="urn:schemas-upnp-org:device-1-0" configId="0">
<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<device>
<deviceType>urn:ses-com:device:SatIPServer:1</deviceType>
<friendlyName>FRITZ!Box 6490 Cable</friendlyName>
<manufacturer>AVM Berlin</manufacturer>
<manufacturerURL>http://www.avm.de</manufacturerURL>
<modelDescription>FRITZ!Box 6490 Cable</modelDescription>
<modelName>FRITZ!Box 6490 Cable</modelName>
<modelNumber>6490avm</modelNumber>
<modelURL>http://www.avm.de</modelURL>
<serialNumber>C8:0E:14:8D:E3:05</serialNumber>
<UDN>uuid:663d5d6c-f9f8-4bb4-84d4-C80E148DE305</UDN>
<iconList>
<icon>
<mimetype>image/png</mimetype>
<width>48</width>
<height>48</height>
<depth>24</depth>
<url>/satip-48x48.png</url>
</icon>
<icon>
<mimetype>image/png</mimetype>
<width>120</width>
<height>120</height>
<depth>24</depth>
<url>/satip-120x120.png</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>48</width>
<height>48</height>
<depth>24</depth>
<url>/satip-48x48.jpg</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>120</width>
<height>120</height>
<depth>24</depth>
<url>/satip-120x120.jpg</url>
</icon>
</iconList>
<serviceList>
<service>
<serviceType>urn:ses-com:service:satip:1</serviceType>
<serviceId>urn:ses-com:serviceId:satip</serviceId>
<controlURL>/upnp/control/satip</controlURL>
<eventSubURL>/upnp/control/satip</eventSubURL>
<SCPDURL>/satipSCPD.xml</SCPDURL>
</service>
</serviceList>
<presentationURL>http://192.168.1.1</presentationURL>
<satip:X_SATIPCAP xmlns:satip="urn:ses-com:satip">DVBC-4</satip:X_SATIPCAP>
<satip:X_SATIPM3U xmlns:satip="urn:ses-com:satip">http://192.168.1.1/dvb/m3u/channellist.m3u</satip:X_SATIPM3U>
</device>

</root>

This is not the first thread on this problem there was a drive by post recently https://forums.nextpvr.com/showthread.php?tid=65004

Martin

Sorry, I haven't seen that before.

Actually, I think it is because your device is returning "Location:" and it's expecting "LOCATION:". In the specification it's uppercase.

Code:

2023-09-14 10:37:19.873    [DEBUG][8]    HTTP/1.1 200 OK
Cache-Control: max-age=1800
Location: http://192.168.1.1:49000/satipdesc.xml
Server: FRITZ!Box 6490 Cable UPnP/1.0 AVM FRITZ!Box 6490 Cable 141.07.57
Ext:
ST: urn:ses-com:device:SatIPServer:1
USN: uuid:663d5d6c-f9f8-4bb4-84d4-C80E148DE305::urn:ses-com:device:SatIPServer:1

You could see if the attached patch helps. (replace your existing file of the same name)

I'll try that tomorrow morning. I can't stop the server right now. 

Cheers,
Richy

[Rickman74]

Actually, I think it is because your device is returning "Location:" and it's expecting "LOCATION:". In the specification it's uppercase.

Code:

2023-09-14 10:37:19.873    [DEBUG][8]    HTTP/1.1 200 OK
Cache-Control: max-age=1800
Location: http://192.168.1.1:49000/satipdesc.xml
Server: FRITZ!Box 6490 Cable UPnP/1.0 AVM FRITZ!Box 6490 Cable 141.07.57
Ext:
ST: urn:ses-com:device:SatIPServer:1
USN: uuid:663d5d6c-f9f8-4bb4-84d4-C80E148DE305::urn:ses-com:device:SatIPServer:1

You could see if the attached patch helps. (replace your existing file of the same name)

Hi sub,

yeah, that worked. All four tuners are back again. Channel scanning worked also. Everything's fine again!
Thanks for your fast help. 

Cheers,
Richy

[sub]

Great