I can't get any audio on Live TV on BBC1 and most other channels using PVRX2 version 1.4.7 and it won't even display a picture or audio on BBC2 even after a complete rescan and removal of my previous installation of version 1.2.9, even though it can play back all the recordings I made before the upgrade with version 1.2.9 with audio. I've tried every combination of audio decoders possible. It's even randomly refusing to tune into any channels at all and giving 0 quality and 0 strength readings even though Hauppauge WinTV 7 can tune into all channels on Freeview when I run that instead. I'm going to do a complete system role-back. Every version of GBPVR I've used after 1.2.9 has either crashed when tuning channels making a rescan impossible without going back to version 1.2.9, failed to make recordings on certain channels such as E4 or been totally unusable like the present version 1.4.7.
I have installed the current Microsoft C++ runtime as recomended I suggest that if other people are having the same problems to go back to version 1.2.9.
The only reason I installed the new version is because all the Freeview channels in the UK have been changes and everyone in the country has to retune and I thought that finally GBPVR might actually be able to detect shared channel slots, such as with CBBC and BBCThree but it can't which means having to rescan 3 or 4 times at different times of day an night to get every channel available.
I would run GBPVR on a Windows Server 2008 R2 (64Bit) machine. My Home-server runs this and is a powerful system which is always on. I would not put a other PC on only to run GBPVR. I have GBPVR without errors installed on the w2k8 machine. Only my analog TV card (Hauppauge PVR-500) gives some errors:
I received errors when I use the TunningAssistent.exe and select my card.
---------------------------
TuningAssistant
---------------------------
Failed to find Crossbar filter. Wrong device type?
---------------------------
OK
---------------------------
I would so happy when I can run it all on my Windows Server 2008 R2. When I start PVRX2 at the w2k8 machine then I received also an error message: ---------------------------
---------------------------
Sorry, this system does not support the required VMR9 video render.
---------------------------
OK
---------------------------
my installed gbpvr version is 1.4.7
in the main menu not correct translated "Picture Library" to "Bildergalerie"
(german word)
in the language file "LANGUAGE.DEU.xml" is correct translated.
have you tips ?
I have a problem. When I watch liveTV or replay a recodingTV program at my NMT than I have no Audio. All other thing from GBPVR (Internet Radio) works well with Audio. Also webservice on the NMT (Youtube) gives Audio.
My NMT is connected with a HDMI cable. I have also try the RCA connectors to connect with my home cinema system.
When I open a recording file (.mpg) on my PC, then I hear also no Audio.
Only happened since upgrading to 1.4.7.
Had some problems so did a clean install, and an install of the latest 'videos library' plugin.
Crashing seems to happen when using videos library but can't be sure as I use it a lot anyway.
I also use HIP to interface to the remote control.
See attached logs
Thanks
I have just bought a TerraTec H5 USB tuner with dvb-T, dvb-C and analog capabilities and though I would use it together with Gb-pvr. The tuner is not natively supported, but I have tweaked the bda ini to be able to use the dvd-c tuner.
The card is now identified by gbpvr and when I start scanning for channels (using map digital channels to EPG channels) it finds only some of all the available channels (approx. 50%).
If I use the software supplied by TerraTec to scan for channels it finds 137 channels (encrypted and unencrypted.)
I have created a new ini in gbpvr\bda\dvb-c with all the frequencies, symbolrate and modulation found by the TerraTec software and I am using this in the digital source configuration.
I have tried to do a manual scan but it still doesn't find channels at frequencies where I positively(from TerraTec software) know there should be channels.
If I accept that I only have a limited number of digital channels and enable them all and then close gb-pvr configurator everything seems fine, but the EPG is just showing no info on all the channels even after a full EPG update (which btw takes for ever. 1 min pr. frequency thats 20 mins for 20 frequencies!)
I went into GBPVR lastnight to setup a recording. I have it set to come into the TVGuide. Before I set a recording, I scroll to the station and select 'Watch' from the menu to make sure I'm getting a signal. In LiveTV the narration was in Spanish! This is the first time this has happened to me. I checked my Settings and they were set to English. I checked the show on my actual TV set, and it was in English. I went ahead and made the recording and the recording was in English. Only 'Live TV' was Spanish.
I've been watching live tv for a while and a scheduled recording comes on the same channel. The live tv stops, screen goes black, and the live recording picks up, loosing several minutes of the scheduled recording.
Currently I have 2 MVP and a Hauppauge 150 & 250.
I have one HD TV in and would like to start to record over the air HD TV. Still use my Hauppauge to record my analog Cable.
So I know I need a new TV tunner and something to replace the MVP.
Popcorn A-100 seems pretty comon to replace the MVP. What about a Tunner? I only have PCI slots (not express) or USB.
Also can I set up GBPVR to record over the air HD on the HD tunner and the Analog for the Cable?
What format will the show be recorded in? Just how much drvie space will I need?
Got the server running just fine, no issues there.
Trying to set up a client. Got the client mode set on the capture source tab, server field is set to the network name that the main GBPVR is running on.
Read the wiki, it indicated I don't have the proper decoder installed on the client. I'm running the WinTV-HVR-1950 on the main GB machine, and tried loading drivers on the client.
Got a message indicating drivers weren't installed since hardware wasn't detected.
About the only thing I haven't tried is plugging in the vid capture hardware, load the drivers, and return it to the main computer.
Anytime I try to start the application, I get the following error:
[INDENT]Unhanded exception has occurred in a component in your application.[/INDENT]
and
[INDENT]Object reference not set to an instance of an object.[/INDENT]
