I have set up the card under config and set-up the channel sources, the same channel source being the same for all the channels from my STB.
e.g.
BBC 1 - 63
BBC 2 - 64
SKY 1 - 68
SKY 2 - 68
SKY SPORT 1 - 68
You get the picture. Then I have mapped the channel numbers for the channel sources e.g.
BBC 1 - 101
BBC 2 - 102
SKY 1 - 106
SKY 2 - 107
SKY SPORT 1 - 401
etc.
But when I change channel the blaster transmits to the STB the channel source. E.G. I type 106 using the remote and and 068 is transmitted to the STB using the blaster.
Is this correct ?
Or should should I have setup the STB channels as the source being AV input rather that RF Antenna, then set the channel sources appropriately. I would rather not do this. So is there a way to transmit the channel numnber rather than the channel source number.
I'm trying to get my Asus u3100 Mini USB hdtv capture card to work with gbpvr but it wont recognise the card.
Ive set it up under digital recording setting (if i click only cards found on this system it sais there is none) and imported the xml file. when try to map to the digital channels and scan for channels i get a "System.NullReferenceException: Object reference not set to an instance of an object." message.
Full error is attached and is the filtercheck file.
I have added my own u3100 entry into the .bda file with the proper information from graphedit and wiki site with no luck.
Any help or ideas would be great if possible.
cheers
First let me start by saying that I have been using djkxml for some time now and think it is awesome.
However it has stopped working. I'm hoping that somebody can help me out and get it working again or perhaps get a fix for it. My EPG runs out at the end of Friday so hopefully it can be fixed before then. Below is the log file showing the error that occurs which then causes a crash:
A crash then occurs with the following message:
Unhandled Exception: System.IO.FileNotFoundException: Could not find file 'C:\Wi
ndows\ehome\BladeRunnerPro\djkxml\listings.xml.gz'.
File name: 'C:\Windows\ehome\BladeRunnerPro\djkxml\listings.xml.gz'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, I
nt32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions o
ptions, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access,
FileShare share)
at djkxml.Module1.decompressListingsFile()
at djkxml.Module1.downloadGeekPages(String searchStr, String sourceAndDate)
at djkxml.Module1.downloadMissingPageX(String sourceAndDate)
at djkxml.Module1.downloadMissingPages()
at djkxml.Module1.Main()
The system cannot find the file specified.
The system cannot find the file specified.
Hi. I'm new to this forum & to setting up a pvr/media computer.
This new computer has 3 tuners in it; 1 Hauppauge WinTV1250 card and 2 Pinnacle PCTV HD PCI cards. I setup GB-PVR to scan channels on all 3 cards, doing the WinTV first. It successfully found all the available digital channels in the area. However, when I tried the scan on the Pinnacle cards, it only found channel 11, about 40 times! what gives? I setup the WinTV card and one of the Pinnacle cards as device 1, the other Pinnacle card as device 2 (per another thread that I found here). The program that comes with the Hauppauge card apparently only works with the WinTV card. The program that comes with the Pinnacle cards only appears to work with those cards. Can anybody tell me what I am missing?
Thanks!!
Rob
I have a PVR250 and Nova-T -500 card in my setup. Both have IR sensors. When I just had the PVR250 the Hauppauge remote seemed to work. Now with both cards in there I can only get very limited functionality to work with the Nova-T 500 remote which is a 48(?) button remote. The sensor is plugged into the Nova-T card.
I have done the following. In config set in DVD the fact I am using the 45 button remote and re-ran the IR application. But all I can do with the remote are the up/down/left/right/OK buttons. Nothing else works - can't do esc and go back to a previous menu and can't stop/pause playback.
So it seems GB-PVR sees the remote but with severely reduced functionality. Anything else I should be looking at?
hey everyone, i'm setting up a new development machine, and need a virus scanner and firewall for it. I'm sick of paying for norton and its daily scans.
For a virus scanner I want somethign that will keep my machine secure, running quietly in the background and use as little system resources as possible.
for a firewall i want something that will ask me about each program that is accessing the internet and if i want to block it, and low resources, and secure of course.
virus scanner ill probably go with avast, but theres always the debate over avg and avast, just wondering what real peoples opinions were.
P4 IBM ThinkCentre (Model: 8141-WT1) Single Core, 3 GHz, 1 gig RAM, 80 gig SATA HD, DVD+/-RW
I need help selecting a tuner and video card. I plan to use this setup for OTA ATSC. I am lucky and get very good reception. I have a magnavox circa 1995 32" CRT TV with a coxal and rca connections, and I am happy with SD picture. HDTV is not necessary.
I have read here that the Hauppauge WinTV-HVR 1600 is a good card for gbpvr, would it work for me?
I am on a tight budget, I hope to spend 20$ or less for the video card, and around 50$ for a tuner with a remote. Yes, I know I'll be shopping ebay
Is it possible to pull the subtitles stream out of the TS when recording? I believe if gbpvr captures the whole stream they're there, but if it's doing the demux and only capturing the one program stream I don't think its grabbing the subtitle stream.
Just to say bye from me in GBPVR land. Due to unforseen circumstances (like machine refusing to boot up ) my use of GBPVR has come to an abrupt end and migration forced.
Hope GBPVR continues to enjoy its success and functionality. Good luck.
) my use of GBPVR has come to an abrupt end and migration forced.