I'm using the latest gb-pvr and have been using mc2xml successfully for a year. Now I get nothing. No Show Details.
The xml file is there, at 17,098kb and i've set config to read it from it's location.
I've tried updaing the epg from:
a) right clicking the icon in the taskbar.
b) the Settings button in the interface.
c) the config screen, xmltv source, settings update epg.
I've emptied and redownloaded multiple times.
I uninstalled, removed and deleted all of gbpvr and reinstalled.
I've looked over every post I can find, with xml epg issues, and nothing i've tried will work.
I've downloaded and am using the latest version of mc2xml.
I've double checked that my zip code and location are correct.
I just cannot get gbpvr to "read" the xml file and put any data in the tv listings.
Any clues?
Attached are all the logs i could find.
I've got two haupauge 45 button remotes (NOT the MCE type) and the receiver / blaster wires clogging up my cupboard. If anyone wants one PM an address (UK hopefully ) and I'll post them on.
They're off my HVR1300s but seeing as I'm using a USB MCE remote I can't realistically see me needing them and thought they might do someone as a spare or replacement.
Pretty sure the remotes are 100% Ok. I think I remember the receivers needed a wiggle sometimes but I imagine this was more likely to be the card socket and not the plug/wire as I can't see any obvious damage.
First come first served or they're going in the bin.
I'm about to swith to Bell TV HD, with the 6131 receiver, and that receiver has the ability to add a USB drive so to enable a PVR.
I've searched alot to know if it would be possible to rip what was on the EHD (external hard drive), and pretty much all I read is that the data would be encrypted. Thing is though, all the forums I found are several months old, even some years old. So I'm wondering, now...
Any canadians with the 6131 and EHD can confirm/infirm about being able to rip to the PC?
I have been using GBPVR for a few years now, but re-installed a few months ago and recording works for about a day and then fails for all recordings until pc is restarted. Restarting pc every day fixes problem, but it would be nice if it worked. Have attached logs.
Using WinXP 32 bit SP3 and GBPVR 1.3.11 (I think - can't remember if I installed it - if not, using 1.3.07)
I'm having one more problem with my client PC. Intermittently (but quite regularly), when changing the channel during LiveTV, the program will freeze. This always occurs on a channel change, never when starting LiveTV. It seems to be the same problem discussed in this thread back in 2007: http://forums.nextpvr.com/showthread.php?t=24591
When switching channels, sometimes the channel will change but immediately freeze PVRX2 (leaving a still image of the new channel). The only way to exit is by killing the program.
The final solution advocated, upping the ClientModeLiveTVPrePlayDelay to 5000, works to solve the problem. Unfortunately, it makes each channel change last about 10 seconds, which will not go over well with the family.
I attached my PVRX2.exe.log from right after a lock-up (before changing ClientModeLiveTVPrePlayDelay). I'm wondering if there is anything else to be done.
After years of flawless service, trauma is coming to my GB-PVR setup. Comcast will stop broadcasting the analog signal in our area this spring. AS I understand it, they will be using clear QAM on all the channels that are currently analog. This will force me to record digital broadcasts and transcode them in order to play on our MVPs. Because we have multiple MVPs and watchers, a real-time transcode will not serve as the only solution, I will need to store transcoded videos. The SDTV format is MP2 video/AC3 audio, and I think I can figure out an ffmpeg command string to convert the audio. However, the change is also motivating me to allow for HDTV and playing to a yet-to-be purchased NMT. So, what I think I need to do is to write a script that will figure out whether a given recording is SDTV (and needs to be converted) or not. Any suggestions on how to do this accurately? Other questions, will I be able to slipstream (FF and REW while recording) with both devices? Does comskip work with .ts files, SDTV and HDTV?
Thanks for any help, and special thanks to Martin for MVPMC and his support for both MVP and NMT.
I don't want to use just any glue, but the IR blaster I use for my cable STB is coming loose, and has caused some missed programming. It's on right now, but I don't know how long it will stay.
I recorded 4 show on the same channel and 1 show on another channel all starting at 8pm last night. I have a 2 minute pre and 3 minute post buffer set. The 3 shows that I already watched (all from the same channel) were fine until the last 2 minutes. Then the audio dropped out. If I clicked on the audio button on the remote, the audio would came back (track 2). I never had this before and am just curious if this is normal for back to back recordings. Also, the one show I recorded from another channel has a problem. I can't do the normal 30 second skip. I get an ! on the screen.
This past weekend, I uninstalled GBPVR and reinstalled from scratch. My tuner is an HDHomeRun (latest official firmware/software and using OTA) and I watch everything through a Popcorn Hour (latest official firmware). I have multi-record enabled and the HDHR software has dynamic tuner allocation disabled.
I have set up GBPVR with a client server set up. I must say it works really well! Best settings are TS mux (cyberlink mux stuttered very badly) and I'm using file sharing, not streaming. My server is only a fanless Via Epia system and CPU usage is low, network only peaks at about 8% on a 100Mb LAN. I'm very optimistic that it will work fine over 54g wireless - I plan to try it at some point.
Anyway the problem I have now is that the server goes into standby after 1hr. When I turn my client machine on, if the server isn't there it creates some problems. Trying to run PVRX2 only results in me having to use the task manager to shut it down. I had to wake up the server first using wake on lan, then close down GBPVR tray, restart recording status, and then start everything back up for it to work. What would be much better would be to have a client that recognizes when the server isnt there and have an option to wake up the server. If PVRX2 could run without crashing then I could have my own custom task in the main menu to run wake on lan from the comand prompt. But I would still need better server / client comunication for it to work without having to manually click on restart recording service.
I was experiencing many little issues with GBPVR so I decided to do a fresh install. All of my problems are now gone, but I have a new one. When I open GBPVR from the PCH and choose MovieWiz it comes up fine. But I cannot navigate through the movie list. It is completely non responsive to any remote keys. The only thing I can do is hit the power button on the remote, which takes me out of GBPVR completely. I can go into TVGuide, Recordings, Music, Weather, etc. without any issues. I am not sure if it's a skin issue. I am using the Mayhem3 skin. I also remember a while back I had some slow, lagging issues and we tried a few dll files and it finally got resolved (dll version 1.0.17.5). See this post: http://forums.nextpvr.com/showthread.php...hlight=PCH. I figured this fix would have been implemented into new versions (I'm running1.0.24.0). I am looking for a starting point of troubleshooting. Should I copy over the dll that I previously used, should I try a different skin, or something else? I have attached the dll I was using before if you'd like to take a look at it.
) and I'll post them on.
