Hey all,

I've been having this problem since I first installed gbpvr, so I just thought I'd ask. If I reboot my pc, then my MVP won't find the server again unless I do the following. I have to unplug the MVP. Then I have to go to my PC and start the gbpvr config app. Then I have to switch from my dongle (which is dongle_30_24088.bin) to some other dongle. Then I hit O.K. to exit "config" (here is why it is a pain, because it interrupts the recording service if it is recording). Then I open config again, switch back to my original dongle, and hit "O.K." again. Then I go back and plug in the MVP. After a couple of tries, it loads.

If I just hard boot the MVP by unplugging it, without doing the dongle switch and switch-back, then it won't load gbpvr on the MVP.

Any ideas?

Thanks,
bertros

I set the Remote Control Type in Config to Default(Hauupage) and clicked on the Fix Hauppage Remote Settings (45 button remote) and restarted the IR.
But still it doesn't work.
Here are my log files. [ATTACHMENT NOT FOUND]

I tried the remote in WinTV2000 also, but didn't work.
In the Hauppage CD I found 3 setup files in IR32 folder called IR32, IRBlast and IRBlastWiz. I installed all of them.

When I tried the Remote with my Visa Home Laptop with Media Center it worked without installing anything. SO the Remote is definitly working.

Thanks in advance.

It appears that the EWA Episode Search "Time Range" fields are not being handled correctly for saved searches. If I save a search containing blank "Time Range" fields, then when I retrieve the saved search in order to use it the "Time Range" fields are both populated to "12:00am" ... which in turn renders the search ineffective. Note that the saved search does work fine if I blank out these two fields before I submit the search.

I'm running gbpvr version 1.1.5 with build 67 of the EWA.

I dont really care about HD signals. I have 5 MVP's throughout my house. And am trying to get rid of my monthly bill.

The below solution would seem to work. Has anyone tried it?

Buy an external ATSC tuner about $100 (anyone know any that are compatible with the hauppauge 150 ir blaster, or support a serial interface)

Take the output off the tuner and plug it into the hauppauge 150.

The hauppauge will store the signal in a mvp compatible format.

I should still be able to stream it and get all my local stations for free.

Hi, been using GBPVR for a year or so now, and now built a new media pc with a cunningly smalll Hiper media case. However, this meant using a USB TV card, so I bought the WinTV Nova-TD USB stick with two freeview capture sources. The problem is that although I believe I have followed all the instructions for setting up the capture sources, and can watch and record TV, I can not record two programs at the same time or watch one and record another - wife displeased.

I have set up both with the same EPG source, both are set to device 1, and they are set to the Tuner 1 and Tuner 2 in the device list (selecting from devices found on the pc). Can anyone help? Forgive the lack of detailed info as I'm sat at work, with the boss staring at me...

I just upgraded to 1.1.5 yesterday. I recall seeing a place where you could specify the number of time slots shown in the TV Guide, but now cannot find it.

Ahhh - just noticed that the System->Settings option is not present in PVRX2 (it is in GBPVR). Does that mean we can no longer change the number of time slots displayed by the Guide?

I want to reduce it from the default of 120 mins(4 slots) to 90mins(3 slots), so I can increase the font size of the listings for our tired eyes when using MVPs with TVs - viewed from a distance

In looking at the Skin2\Blue\TV Guide\skin.xml, I can't see how to tweak it to display just 3 time slots. I can easily comment out one of the 4 lines that displays the 4th time slot's header info, but where do you supress the 4th guide listing itself?

Oh, and I do see a setting <TVGuideVisibleMinutes>###</TVGuideVisibleMinutes> in Config.xml, but changing it seems to have no affect (I expected it might modify the Guide's skin.xml?)...

Many TIA!

deccheck tells me it's only gonna run on xp - is there an equivelent for win2000?

Did something happen with the webUI with GBPVR release 1.1.5? I can't access the webUI anymore, since upgrading. Anybody seen this?

Hi,

I have a Torridal T90 with a 8 way diseq 1.0 multiswitch.

I was hoping that i could use with GB-PVR with a NOVA-S-PLUS satellite card.

are there any plans to add the ability to have different LNB LO for each satellite?

From initial testing so far that seems to be the only gotcha (for me anyways) - as i can find each of the channels on each sat if i change the LO each time... however can only ever use one LO - so that i dont mix sats up on the multiswitch . i use a combination of 10600 (for D1) , and 10750 or 11300 LNBs.

edit --- have found answer after searching more - sorry for any inconvenience

I've got a PVR500 (dual analog) and HVR1600 (1 analog, 1 ATSC) in my XP box, and all is well, except I have finally run into the issue I've dreaded most - I finally need to record three shows at once. Up until now, the PVR500 has done a fine job of handling two recordings when needed, but for some reason, when I now try to set up the third program, GBPVR basically tells me that I don't have a tuner available to use and that I have to cancel one of my other pending recordings to make one avaialble.

I KNOW I have a third tuner, darn it! Any ideas on how to make GBPVR realize that it has the third tuner available? I've checked and rechecked the config, and all appears to be correct - tuners showing and configurable, etc. Here's the setup:

WinXP Pro w/ All service packs and updates
PVR500 dual analog
HVR1600 Analog/ATSC
Direct recording plugin for all three analog tuners, BDA for the ATSC
GBPVR 1.0.16

Anyone have any ideas on how to proceed? I've run out of ideas, though that's not too hard nowadays...

Thanks in advance for any suggestions.