Had to rebuild my machine and re-installed Windows over the current directory (deleting the existing one). But left program files etc.. Then tried to install gbpvr 1.08 (which was already in the devnx\gbpvr directory but of course no valid registry entries etc.). Installation proceeded to about 80% then an error message, psparser.ax failed to register HRESULT -2147010895. Clicked ignore and while the installation completed (sort of) when config came up, got a .net error and the configuration screen was empty.
Have tried to remove and re-install several times again to no avail. When I click Remove gbpvr from control panel, the removal completes but then installation starts again. I seem to be in an installation loop now.
Is there a way I can get back to a situation where there is no gbpvr but I can still retain my configuration files?
I upgraded to 1.00.08 last week and this behaviour started. When SUB released 1.00.16 I upgraded right away (and am currently running this release).
When I schedule a recording and decide to watch it after a while partly becuse we had not finished dinner by the time the show started and partly because we do not like to watch the commercials (I have comskip running in parallell so it skips commercials perfectly). It works just fine up until the recording finishes. The MVP then disconnects and the current viewing position of the fiel is NOT saved ot the database. When the MVP re-establishes the contact I can start watching again but I have to skip to about the position we were at. No problem there but my wife is not too impressed...
My setup: Server:
P4 Dual Core 2.5 GHz with 1.5 GB RAM and a 320 GB dedicated recording SATA-1 drive.
Windows 2003 Server
Two Hauppauge PVR-150 TV-cards
GBVPR: 1.00.16 (no patches)
The only plugin I currently have installed is the Weather Plugin.
The MVP is a Wireless device but is Wired to the same switch as the server (built into my ADSL modem/wireless router). Running the default dongle.bin from 1.00.16 release.
The only log entrys I have to show you is from the recording service showing that everything is working fine (the MVP-PVRX2.exe.log had already rolled over so no info to find there unfortunatly):
Code:
2007-08-17 20:59:00.017 INFO [5] Found new programme requiring recording: En kvinnas doft
2007-08-17 20:59:00.080 VERBOSE [5] Changing to channel (GBPVR.Backend.Common.NullTunerController): 33
2007-08-17 20:59:00.142 VERBOSE [5] Requesting IRecordingSource to start recording: \\server2\Video\Inspelningar\En kvinnas doft\En kvinnas doft_20070817_21002355.mpg
2007-08-17 20:59:00.142 VERBOSE [5] DirectRecordingSource about to start recording oid:1 channel:33
2007-08-17 20:59:02.392 VERBOSE [5] recording started
2007-08-17 20:59:02.392 VERBOSE [5] Programme is now recording
2007-08-17 20:59:02.392 VERBOSE [5] RecordingFactory.save()
2007-08-17 20:59:02.533 VERBOSE [5] Save(): Updated existing scheduled recording
2007-08-17 20:59:02.549 VERBOSE [5] Adding \\server2\Video\Inspelningar\En kvinnas doft\En kvinnas doft_20070817_21002355.mpg to parallel processing queue
2007-08-17 20:59:02.549 INFO [5] Found new programme requiring recording: Kommissarie Morse
2007-08-17 20:59:02.549 VERBOSE [5] Changing to channel (GBPVR.Backend.Common.NullTunerController): 41
2007-08-17 20:59:02.564 VERBOSE [5] Requesting IRecordingSource to start recording: \\server2\Video\Inspelningar\Kommissarie Morse\Kommissarie Morse_20070817_21002300.mpg
2007-08-17 20:59:02.564 VERBOSE [5] DirectRecordingSource about to start recording oid:2 channel:41
2007-08-17 20:59:03.971 VERBOSE [5] recording started
2007-08-17 20:59:03.971 VERBOSE [5] Programme is now recording
2007-08-17 20:59:03.971 VERBOSE [5] RecordingFactory.save()
2007-08-17 20:59:04.096 VERBOSE [5] Save(): Updated existing scheduled recording
2007-08-17 20:59:04.096 VERBOSE [5] Adding \\server2\Video\Inspelningar\Kommissarie Morse\Kommissarie Morse_20070817_21002300.mpg to parallel processing queue
2007-08-17 20:59:04.096 VERBOSE [5] RecordingFactory.getExtrasForGroup(8)
2007-08-17 20:59:06.486 INFO [7] Running comskip on: \\server2\Video\Inspelningar\En kvinnas doft\En kvinnas doft_20070817_21002355.mpg
2007-08-17 20:59:14.517 INFO [7] Running comskip on: \\server2\Video\Inspelningar\Kommissarie Morse\Kommissarie Morse_20070817_21002300.mpg
2007-08-17 21:15:57.542 VERBOSE [14] Hour is currently 21. Conversions will happen between 0:00 and 5:00
2007-08-17 21:45:57.546 VERBOSE [14] Hour is currently 21. Conversions will happen between 0:00 and 5:00
2007-08-17 22:15:57.592 VERBOSE [14] Hour is currently 22. Conversions will happen between 0:00 and 5:00
2007-08-17 22:45:57.596 VERBOSE [14] Hour is currently 22. Conversions will happen between 0:00 and 5:00
2007-08-17 23:03:00.132 VERBOSE [5] Recording has passed endtime+padding. Stopping.
2007-08-17 23:03:00.148 VERBOSE [5] Stopping recording oid:2
2007-08-17 23:03:00.366 VERBOSE [5] Adding \\server2\Video\Inspelningar\Kommissarie Morse\Kommissarie Morse_20070817_21002300.mpg to commercial detection queue
2007-08-17 23:03:00.366 VERBOSE [5] Adding \\server2\Video\Inspelningar\Kommissarie Morse\Kommissarie Morse_20070817_21002300.mpg to conversion detection queue
2007-08-17 23:03:00.585 VERBOSE [5] RecordingStatus is now RecordingStatus.RECORDING_COMPETED
2007-08-17 23:03:00.585 VERBOSE [5] RecordingFactory.save()
2007-08-17 23:03:00.679 VERBOSE [5] Save(): Updated existing scheduled recording
2007-08-17 23:03:00.679 VERBOSE [5] RecordingFactory.loadSchedule()
I have been having fun mapping my MVP Remote (same as 45 button Hauppage MCE Remote IIRC) with the USBUIRT using Eventghost (great program btw, IMO easier to learn than HIP).
I took the existing GB-PVR plugin and tried to modify it for PVRX2. It works OK for commands where I can activate the PVRX2 Window with the Macro commands OK, but any built in items like "GB-PVR: Down" gives me a "GB-PVR is not running" error?
I can't seem to (re)configure those commands.... is there any way to modify these? I tried changing GB-PVR: Down to PVRX2: Down, but nope..
During mpeg playback ff/rew, skip forward, reverse and stop don't work from the remote. They do work from the keyboard. The back button and the volume button still work. All of these are working in gbpvr on 1.0.16.
Any ideas? Sorry if this has been covered, busy week..
I can watch all channels perfectly wit GBpvr and mdapifilter.ax. The problem comes when i try to update the epg. Then a new instance of mdapifilter is started and there seems to be conflicts. After I update the epg, I have to restart the comp to be able to see tv again.
I guess most of the problem is that an old instance of mdapi isn't closed as it should. But on the other hand, I do not think that the filter is needed to update the epg. The info is available "for free". I tried to upgrade to a newer mdapi without success.
If I wanted a filled in rectangle at the bottom of every list item, do you think I could do this with the default UI classes, or for that will I need to get in to drawing all the list elements my self?
This is the effect I'm going for - the lines underneth the title which show the progress through the recording.
Is PVRx2 supposed to be able to start multiple times? I have the TV button on my remote mapped to starting PVRx2 it used to be set to start GBPVR and quite often when the app started it was not fully at the front as a full screen, this was easily solved by pressing the TV button once more, now I just get a second instance of PVRx2 and both are not at the front
I have 2 cards, one Hauppauge 250 which works fine, then a Dvico Fusion ATSC 5 which I can't get the video to work for, but did have it working for a second. I'm just trying to get one channel working for now, and I should have the tuning string right which is T:31,25,1, but when I try to go to the channel, the entire program freezes and I have to kill it. At that point, the recording service is still green and says it's doing something on the digital card. I'm running WinXP. Like I said, I had it working for a second and then must have done something. Any ideas?
