Hi, i just brought the Sapphire ATI 550 PRO with remote, after installation, i run the program and press the LIVE TV, it shows
"No channels have been set up. Please run the configuration utility and set up the EPG source. Use the "Update EPG" button to force the system to import the latest set of channel and programme information"
How can i solve this problem? thx

This could be a radio button option in the config program.

If checked, then any time you started watching liveTV gbpvr would automatically start buffering and keep the last 30min of whatever you are watching. This would allow you to rewind and catch something you missed. Also, if you got 20 min into a show and decided you wanted to record it, you could get it from the beginning.

Just a thought.

Hi,

I've been using GBPVR for a few months now on a hauppage pvr-500 now. In live TV mode, the audio and video just are not synching. I'm in live preview mode with no filters on, with filters on, no difference. I can't take it anymore, I'm going insane...it's hard to watch t.v. like this, and this is the only setup i have :'(

I'm so dissapointed in the purchase of my pvr-500...I wish I had gotten something simpler, because i've had nothing but problems since getting it. I've even tried commercial software, to no avail.

I'm really at my witts end (And I'm a techy for goodness sakes!). Please help me!

(Will provide whatever info u need, system info follows):

AMD XP 2500+
1 GIG DDR RAM, 2gig swap
PVR-500
BFG Geforce 6600GT OC
1 WD 250gig HD
1 WD 80 gig HD

Hi All

First post so be gentle please!

Please help me out here.

I have a Twinhan Vision DTV DVB-T Card installed in my old machine. IBM Celeron 333 c/w 128Mb onboard grahics etc. Fresh install XP Pro fully updated. I have both the 1.2.3.5 and 1.2.3.6 BDA drivers available (Also some 1.2.2.4). EVERY time I try to install the machine crashes. Doing a manual install results in the same. Twinhan seem to be deaf on this subject and will not talk to me. It appears to be the BDA878.sys driver that causes the crash.

Has anyone else had this problem and is there a way around the problem? I have just spent the last two days trying to get this working and am running out of hair to pull out!

Can GB-PVR do direct support using the standard drivers that install correctly? Is there a plugin that I can use just to make this thing work?

Please help...I am now getting desperate!

Cheers in advance

Jon :confused: :confused:

It seems like this plugin doesn't understand scandinavin characters like æøå [ æøå ]
Loding a playlist containing such characters results in an empty list. An example playlist below:

#EXTM3U
#EXTINF:225,Kari Bremnes - Du har sett dem
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\01 - Du har sett dem.mp3
#EXTINF:234,Kari Bremnes - Englevaktsted
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\02 - Englevaktsted.mp3
#EXTINF:228,Kari Bremnes - I mai
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\03 - I mai.mp3
#EXTINF:249,Kari Bremnes - Skjulemester
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\04 - Skjulemester.mp3
#EXTINF:252,Kari Bremnes - Usynlig
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\05 - Usynlig.mp3
#EXTINF:261,Kari Bremnes - Rose
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\06 - Rose.mp3
#EXTINF:282,Kari Bremnes - MÃ¥nestein
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\07 - MÃ¥nestein.mp3
#EXTINF:253,Kari Bremnes - Ei tid for alt
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\08 - Ei tid for alt.mp3
#EXTINF:264,Kari Bremnes - Formiddag i Portobello
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\09 - Formiddag i Portobello.mp3
#EXTINF:211,Kari Bremnes - At nåkka ska forandre sæ
\\192.168.1.1\shared\mp3\Bremnes, Kari\Månestein\10 - At nåkka ska forandre sæ.mp3
#EXTINF:230,Kari Bremnes - Sang til en mann
\\192.168.1.1\shared\mp3\Bremnes, Kari\MÃ¥nestein\11 - Sang til en mann.mp3

This playlist works fine in both WinAmp and Windows Mediaplayer. Is there some settings I've overlooked or is it impossible to get this working?

I keep having to unplug it and reinstall drivers!

Can I use this Card for GBPVR..?

http://www.aldi.co.uk/special_buys/product_114.html

I am using a Fusion 5 Lite for OTA ATSC HD and a PVR 250 for analog recording. I get great results.

I added a second F5 card and I can not record two HD programs at once. I've verified that each card works and will record if the other F5 card is not recording. I can have one F5 card recording and the other will do live tv. Once I start a second recording, the first recording will continue fine but the second will produce a 6KB dvr-ms file.

The fusion app works fine with both tuners recording simultaneously. I am aware the fusion app uses the WDM drivers and GBPVR uses the BDA drivers which are not as advanced.

If anyone else has two fusion 5 cards recording at once, I'd like some tips on how I could get it working. I'm using the dvr-ms mux.

System specs:
Intel P4 2.8Ghz
Intel Chipset
1 GB RAM
Tuners: Happauge PVR 250, 2 Fusion 5 Lite
Video: ATI AIW 9000 (Only using vid card)
2 SATA WD 80GB spanned to 160GB
XP Pro SP2

Sorry for the newbie questions. I am trying to setup MyVideos to be able to burn recording mpeg files to dvd for viewing. I have downloaded everything required per the wiki. I am confused as to where to install everything that comes in myvideos.zip.

Also, after downloading and trying to run dvdauthorgui, i get the following error: component 'comdlg32.ocx' or one of its dependencies not currently registered: a file is missing or invalid. I tried running from the icon it placed on the desktop after the install. Should dvdauthorgui run by itself?

Is using the MyVideos plugin the best way to get a recordings from mpeg to dvd?

thanks for the help

Just wondered if anyone knows whether a TV aerial feed can be split and then half of it used as a fm radio feed? What I mean is only have 1 aerial and use a splitter so half tv and half radio?

Thanks