In the past I have attempted to use the PVR-350 TV-OUT with SageTV and GBPVR, and the picture was much better than using a software decoder and the TV-OUT on an Nvidia/ATI card. The problem is that using the output on the PVR-350 causes my machine to lockup often, and I know others have this same problem as well. My question is what other hardware decoders exist that work well with GBPVR? How's the XCard? I would like to have my main server connected to one television while other televisions in the house will be using Media MVP units. Also if there are no other good hardware decoders, what inexpensive video cards do you recommend? I've tried a couple of Nvidia cards, but the quality was just not there. With the PVR-350 the picture was just as good as hooking my cable box directly to the television. Will a good video card w/ TV-OUT and a good software decoder give me this type of picture?

Thanks...
Spyork

Hi,

Nearly there, but noting that when GB-PVR is not the active window the remote does not work. If I come back from TV room to PC room and look I can see that the remote arrows are being applied to which desktop icon is selected. That is the desktop had the focus not GB-PVR.

Even without a separate person using the PC (which is a scenario I need to cover off), I have find the Video Library sometime triggers (e.g. after selecting an AVI file to play) a change in what has focus, i.e. GB-PVR window loses the focus.

QUESTION: Just need a way to direct remote control key presses directly to GB-PVR rather than the active window? Anyone know how to do this? (I'm very close now :p )

Notes:

- Using 2005 MCE Remote, with downloaded drivers (i.e. I have XP Home)

- I am still running GB-PVR in windowed mode (as I haven't got to setting up the shortcuts yet to launch in non-windowed mode onto secondary screen). Not sure if this is significant.



Thanks

Anyone get this to work? I was trying to set up being able to turn subtitles on/off (I had it set up to do even w/o focus) via remote, and it doesn't seem to work.

Hi,

I went into Capture Sources and REMOVEd a channel since I didn't want it to show up under the TV GUIDE, but that didn't seem to remove it from the listing. So I tried to add it back, but it behaves weird and is listed at the end in the TV GUIDE.

I just want to restore the channel listing to the original at the install time. How can I do that?

Also how can I remove a channel that I never watch from showing up in the TV GUIDE listing?

Thanks

When you have the GBPVRConvert set to run ASAP and you have back to back recordings scheduled the process doesn't work because it tries to run GBPVRConvert on the second recording instead of the first. Log file details these events


10/1/2005 6:59:00 PM.062 INFO [23] Found new programme requiring recording: Cops
10/1/2005 6:59:00 PM.109 VERBOSE [23] Changing to channel (GBPVR.Backend.Common.NullTunerController): 3
10/1/2005 6:59:00 PM.125 VERBOSE [23] Requesting IRecordingSource to start recording: D:\PVR\Recordings\Cops\Cops_20051001_19001930.mpg
10/1/2005 6:59:00 PM.125 VERBOSE [23] DirectRecordingSource about to start recording oid:1 channel:3
10/1/2005 6:59:01 PM.812 VERBOSE [23] recording started
10/1/2005 6:59:01 PM.812 VERBOSE [23] Programme is now recording
10/1/2005 6:59:01 PM.812 VERBOSE [23] RecordingFactory.save()
10/1/2005 6:59:01 PM.875 VERBOSE [23] Save(): Updated existing scheduled recording
10/1/2005 6:59:01 PM.921 VERBOSE [23] getValue() loading new key/value into cache: /settings/ProcessCommercialsDuringRecording
10/1/2005 6:59:01 PM.921 VERBOSE [23] getValue: /settings/ProcessCommercialsDuringRecording : false
10/1/2005 6:59:01 PM.921 VERBOSE [23] Adding D:\PVR\Recordings\Cops\Cops_20051001_19001930.mpg to parallel processing queue
10/1/2005 6:59:01 PM.921 VERBOSE [184] getValue() loading new key/value into cache: /settings/CommercialDetectionScheme
10/1/2005 6:59:01 PM.921 VERBOSE [184] getValue: /settings/CommercialDetectionScheme : 0
10/1/2005 6:59:01 PM.921 INFO [184] Parallel Processing thread starting...
10/1/2005 6:59:01 PM.968 INFO [184] Running ParallelProcessing.bat on: D:\PVR\Recordings\Cops\Cops_20051001_19001930.mpg
10/1/2005 6:59:02 PM.000 VERBOSE [23] RecordingFactory.getExtrasForGroup(1)
10/1/2005 6:59:02 PM.000 VERBOSE [23] getDatabaseConnection() creating new connection
10/1/2005 7:30:00 PM.125 INFO [23] Found new programme requiring recording: Cops
10/1/2005 7:30:00 PM.125 INFO [23] Stopping existing recording on this capture source. (removing from currentlyRecording)
10/1/2005 7:30:00 PM.125 VERBOSE [23] Stopping recording oid:1
10/1/2005 7:30:00 PM.375 VERBOSE [23] RecordingFactory.save()
10/1/2005 7:30:00 PM.375 VERBOSE [23] Save(): Updated existing scheduled recording
10/1/2005 7:30:00 PM.437 VERBOSE [23] getValue cached value: /settings/ProcessCommercialsDuringRecording : false
10/1/2005 7:30:00 PM.437 VERBOSE [23] Adding D:\PVR\Recordings\Cops\Cops_20051001_19001930.mpg to commercial detection queue
10/1/2005 7:30:00 PM.437 VERBOSE [23] Adding Cops to commercial detection queue
10/1/2005 7:30:00 PM.437 VERBOSE [131] getValue cached value: /settings/CommercialDetectionScheme : 0
10/1/2005 7:30:00 PM.437 INFO [131] Post Processing thread starting...
10/1/2005 7:30:00 PM.437 INFO [131] Running postprocessing.bat on: D:\PVR\Recordings\Cops\Cops_20051001_19001930.mpg
10/1/2005 7:30:00 PM.703 VERBOSE [23] Changing to channel (GBPVR.Backend.Common.NullTunerController): 3
10/1/2005 7:30:00 PM.703 VERBOSE [23] Requesting IRecordingSource to start recording: D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg
10/1/2005 7:30:00 PM.750 VERBOSE [23] DirectRecordingSource about to start recording oid:1 channel:3
10/1/2005 7:30:01 PM.953 VERBOSE [23] recording started
10/1/2005 7:30:01 PM.953 VERBOSE [23] Programme is now recording
10/1/2005 7:30:01 PM.953 VERBOSE [23] RecordingFactory.save()
10/1/2005 7:30:01 PM.953 VERBOSE [23] getDatabaseConnection() creating new connection
10/1/2005 7:30:01 PM.953 VERBOSE [23] Save(): Updated existing scheduled recording
10/1/2005 7:30:02 PM.000 VERBOSE [23] Adding D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg to parallel processing queue
10/1/2005 7:30:02 PM.000 VERBOSE [23] RecordingFactory.getExtrasForGroup(2)
10/1/2005 7:30:02 PM.000 VERBOSE [23] getDatabaseConnection() creating new connection
10/1/2005 7:30:02 PM.187 INFO [184] Running ParallelProcessing.bat on: D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg
10/1/2005 7:30:05 PM.515 INFO [131] Commercial Detection has completed.
10/1/2005 7:30:11 PM.312 VERBOSE [17] RecordingFactory.loadScheduleRecording()
10/1/2005 7:30:11 PM.312 VERBOSE [17] getDatabaseConnection() creating new connection
10/1/2005 7:30:11 PM.312 VERBOSE [17] About to start transcode of: D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg
10/1/2005 7:30:11 PM.312 VERBOSE [17] getValue cached value: /settings/AutoConvertMpgToFormat : XviD MPEG-4 Codec
10/1/2005 7:30:11 PM.312 VERBOSE [17] About to run transcode command: GBPVRConvert.exe "D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg" "D:\PVR\Recordings\Cops\Cops_20051001_19302000.avi" "XviD MPEG-4 Codec" 32
10/1/2005 7:31:11 PM.437 INFO [17] File transcode has completed. Updating database with new name...
10/1/2005 7:31:11 PM.437 VERBOSE [17] RecordingFactory.save()
10/1/2005 7:31:11 PM.437 VERBOSE [17] Save(): Updated existing scheduled recording
10/1/2005 7:31:11 PM.437 VERBOSE [17] getValue() loading new key/value into cache: /settings/AutoDeleteConvertedFiles
10/1/2005 7:31:11 PM.437 VERBOSE [17] getValue: /settings/AutoDeleteConvertedFiles : false
10/1/2005 8:01:00 PM.031 VERBOSE [23] Recording has passed endtime+padding. Stopping.
10/1/2005 8:01:00 PM.031 VERBOSE [23] Stopping recording oid:1
10/1/2005 8:01:00 PM.171 VERBOSE [23] Adding D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg to commercial detection queue
10/1/2005 8:01:00 PM.171 VERBOSE [23] Adding D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg to commercial detection queue
10/1/2005 8:01:00 PM.203 VERBOSE [23] RecordingStatus is now RecordingStatus.RECORDING_COMPETED
10/1/2005 8:01:00 PM.203 VERBOSE [23] RecordingFactory.save()
10/1/2005 8:01:00 PM.203 VERBOSE [23] Save(): Updated existing scheduled recording
10/1/2005 8:01:00 PM.203 VERBOSE [23] RecordingFactory.loadSchedule()
10/1/2005 8:01:00 PM.203 VERBOSE [23] getValue cached value: /settings/AutoRemoveMissingRecordings : true
10/1/2005 8:01:00 PM.250 VERBOSE [23] getDatabaseConnection() creating new connection
10/1/2005 8:01:00 PM.281 VERBOSE [23] checking pending recordings
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Cops
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Cops
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking The Simpsons
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Family Guy
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Grey's Anatomy
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Kitchen Confidential
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Prison Break
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking The Ultimate Fighter
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Bones
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking House
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking The Real World
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Lost
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking The O.C.
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Reunion
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking D:\PVR\Recordings\Without a Trace\Without a Trace_20050929_21002200.mpg
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Without a Trace
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking D:\PVR\Recordings\The Girls Next Door\The Girls Next Door_20051001_14001430.avi
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking D:\PVR\Recordings\Cops\Cops_20051001_19001930.mpg
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking D:\PVR\Recordings\Cops\Cops_20051001_19302000.avi
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking The Simpsons
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: The Simpsons
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Family Guy
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: Family Guy
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Grey's Anatomy
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: Grey's Anatomy
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Kitchen Confidential
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: Kitchen Confidential
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Prison Break
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: Prison Break
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking The Real World
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: The Real World
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Lost
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: Lost
10/1/2005 8:01:00 PM.281 VERBOSE [23] - checking Without a Trace
10/1/2005 8:01:00 PM.281 VERBOSE [23] pending: Without a Trace
10/1/2005 8:01:00 PM.484 VERBOSE [23] RecordingFactory.save()
10/1/2005 8:01:00 PM.515 INFO [131] Running postprocessing.bat on: D:\PVR\Recordings\Cops\Cops_20051001_19302000.mpg
10/1/2005 8:01:00 PM.734 VERBOSE [23] Save(): Updated existing scheduled recording
10/1/2005 8:01:05 PM.734 INFO [131] Commercial Detection has completed.
10/1/2005 8:01:11 PM.500 VERBOSE [17] getDatabaseConnection() creating new connection
10/1/2005 8:01:11 PM.500 VERBOSE [17] RecordingFactory.loadScheduleRecording()
10/1/2005 8:01:11 PM.500 VERBOSE [17] getDatabaseConnection() creating new connection
10/1/2005 8:01:11 PM.500 VERBOSE [17] About to start transcode of: D:\PVR\Recordings\Cops\Cops_20051001_19302000.avi

I'm working on the weather section now of the PM3 skin. I need some help here.
I need some help with how to display 4 days (IE- Today/Mon [can start with Today or Next day and then on.], Tues, Wed, Thurs.) Horizontally, instead of Vertically. I've chased up and down the xml file, but don't see it as anything much changeable other then spacing, and positioning, but not really configurable to display in a horizontal format. Is this not possible currently? If not, are there plans to do this? (*Crossing my fingers REAL hard*)
I really hope so, or the weather section will never work with the way i'm doing the PM3 skin.

Hi:

I just started using GB PVR (after multiple attempts to get MythTV working to no avail) but I have 1 problem. I cannot get sound from the live TV option. The playback in GV PVR is fine (recorded shows) and other windows applications. I was wondering if someone could maybe make a few suggestions on settings to check.

Current configuration:
P4 2.66 Ghz
512 MB Ram
80 GB Ata 133 Drive
250 GB Ata 100 GB Drive
ATI Radeon 9250 128 MB Ram
AverMedia M150
MCE Remote with reciever
Windows XP SP2 Professional

I have all the latest drivers and updates for GB PVR and my hardware.

Thanks,
Matt

Hello!

As i surfed on the english Hauppauge Site, i had to see that there were only old drivers for this beatiful cards.

On the german Site are newer ones:

http://www.hauppauge.de/pages/support/su...0-350.html

Version 2.3b

and a really important update of this 2.3b driver for nForce Users, which have problems with their remote-control (no function after ~30 Minutes)

Update Version 2.0.34.23172

One important thing is not to read on the Web-Page: A Display-Bug (Vertical Lines) are fixed.

I would recommend all PVR x50 Users to upgrade their drivers, if they have problems or aren't happy with their quality!

A nice sideeffect on my two PVR-150's: If i use one for recording and the other one for seeing TV, my picture is now free of unsharp scenes

I've downloaded the lastest xrecord and like it, but every few days it'll come up with an error. Sometimes the guide gets stuck in a loop of a few channels, other times it will give the object error. anyone else had this problem?

Hello sub, i would tell you a little bug(?) of the Installer from GB-PVR. If i choose another directory, than the default one, the folder "devnz" will be created though. If i delete this (empty) folder, at next start of GB-PVR is starting the Installer -Package for "repairing" and making again the (empty) devnz.