Twinhan / Azurewave AD-SE200 or 1028

[Carandiru]

I managed to get this new DVB-S Card working, here is the settings for BDA.ini

[Twinhan AD-SE200]
TUNING_TYPE=DVB-S
FILTER_TUNER=DTV-DVB PCIe BDA DVBS Tuner0
FILTER_CAPTURE=DTV-DVB PCIe BDA Digital Capture DVBS0
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

This was tested on Vista x64.

One problem though, I couldn't configure a Diseqc Switch correctly, but oddly enougth setting to none allowed me to pick up signal and get channels scanned.

added logs.

[sub]

Thanks. I'll add it to the master file.

[Carandiru]

Well oddly enough if I change that setting in config.xml
BDATwinhanDiseqcMethod>0</BDATwinhanDiseqcMethod>

0 lets me access Diseqc Port B and I can scan Nimiq 82
1/2 lets me access Diseqc Port A and I can scan Nimiq 91

but I can't get both simutaneosly to work no matter what the setting is.

any ideas?

[sub]

What sort of diseqc switch are you using? 2 way 22khz switch, or a 4 way diseqc 1.0 switch?

[Carandiru]

4 way Diseqc switch that originally came with my viewsat ultra.

[sub]

I'm not really sure what to suggest. I'm able to use a 4 way diseqc switch with my twinhan card, with satellites connected to multiple inputs on that switch.

[Carandiru]

Hey looks like I have found a interesting effect.

If I load MyTheatre first, it tunes to a channel and close....

Then load up gbpvr, and then I scan there is signal/quality.

If I didn't load MyTheatre (which I'm guessing is powering the LNB), then no signal/quality was present when I scanned.

Same thing happens, If I reboot.

Try to load gbpvr, no screen.
Load MyThreatre, close Mytheatre, open gbpvr, picture!!!

[jasonpv]

Awesome! Thanks for sharing Carandiru. So with the channel scans were you able to get chans from multiple sats? If so, what type of lnb are you using? Thanks for the info!

[NI2O]

Try to load gbpvr, no screen.
Load MyThreatre, close Mytheatre, open gbpvr, picture!!!

Same thing here. I just rebuilt my PVR-2 machine yesterday and added this card as a second satTV input.

Any ideas?

Mark