My bug list for 1.5.33

[_Iz-]

Nothing too major but definitely affecting the WAF (especially since none of these things were a problem when I was still running 1.4.7)

Setting up a recurring recording through EWA using "This Time Slot" & "This Day Only" Fails (works fine through npvr's TV guide)
Recurring recordings setup for Sunday somehow end up as Monday instead (in both ewa and npvr)
When watching recordings, they don't always exit back to npvr when then end, sometimes they just freeze on the last frame until you hit stop
Recordings sometimes freeze at comskip cuts until you hit skip forward or stop
Cancelling a recording in progress crashes nrecord
Streaming a live show from ewa crashes nrecord when you stop the stream
Small skip forward doesn't always advance the recording on my PCH through mvpmcx2.

[sub]

When watching recordings, they don't always exit back to npvr when then end, sometimes they just freeze on the last frame until you hit stop

If you're using EVR, try this patch: http://forums.gbpvr.com//showthread.php?...post393986

Recordings sometimes freeze at comskip cuts until you hit skip forward or stop

Are you talking about when it tries to auto skip sections of the recording that comskip has marked as adverts, or have you literally cut adverts from the file? If the later, most of the utilities I've seen that do this break the timeline of the show, and I'd expect bad behaviour like this. If the former, reproduce and post the logs and I'll take a look. You have attached some logs, but I have no idea what they're for.

Cancelling a recording in progress crashes nrecord

What is the error message? Reproduce and post the logs and I'll take a look.

Post anything related to EWA in the EWA forum.

Post anything related to PCH in the mvpmcx2 forum.

[johnsonx42]

When watching recordings, they don't always exit back to npvr when then end, sometimes they just freeze on the last frame until you hit stop
Recordings sometimes freeze at comskip cuts until you hit skip forward or stop

This is likely caused either by the memory leak, which is the fix sub linked, or by the NRecord High-CPU usage bug which has also been fixed (or at least worked around) here: http://forums.gbpvr.com//showthread.php?...post393935. Both patches are part of the cumulative patch archive posted in the NPVR Getting started/support sticky linked in my signature.

Cancelling a recording in progress crashes nrecord

I cancel recordings in progress all the time, never had NRecord crash because of it.

[_Iz-]

Are you talking about when it tries to auto skip sections of the recording that comskip has marked as adverts, or have you literally cut adverts from the file? If the later, most of the utilities I've seen that do this break the timeline of the show, and I'd expect bad behaviour like this. If the former, reproduce and post the logs and I'll take a look. You have attached some logs, but I have no idea what they're for.

It's the former (auto skip of comskip marked sections, no utility has physically cut them out). Happens randomly, I'll grab the logs when it happens again.

What is the error message? Reproduce and post the logs and I'll take a look.

No error message on screen or in the logs. nrecord just stops.

[sub]

No error message on screen or in the logs. nrecord just stops.

Ok - still post the logs. If it generates a dmp file, post this too.

[_Iz-]

Edit: Is it normal for NextPVR.exe to be using 883,960 K ??? I'm just watching a recording...



I do use EVR and installed the patch you linked above.

I'm just watching the recording I made of survivor, and it froze at the third commercial break. I did nothing and used remote desktop to access my pvr on a separate account (I have the concurrent user patch installled). While I was checking the logs, after 3 or 4 minutes the recording finally did the skip over the commercials and started playing again without me doing anything.

relevant log snippet shown below.

interestingly, after it started playing again, I reloaded the log file and it added another skip point to the log that wasn't there while playback was frozen

Code:

2010-11-10 21:43:10.133    [DEBUG][1]    PlaybackPositionHelper.GetPlaybackPosition(D:\Recordings\Survivor Nicaragua\Survivor Nicaragua_20101110_20002100.ts)
2010-11-10 21:43:10.133    [DEBUG][1]    Element not found: /Skin/Element[@name="PopupLeftButtonNormal"]
2010-11-10 21:43:10.133    [DEBUG][1]    Element not found: /Skin/Element[@name="PopupLeftButtonSelected"]
2010-11-10 21:43:10.138    [DEBUG][1]    Element not found: /Skin/Element[@name="PopupLeftButtonNormal"]
2010-11-10 21:43:10.138    [DEBUG][1]    Element not found: /Skin/Element[@name="PopupLeftButtonSelected"]
2010-11-10 21:43:10.138    [DEBUG][1]    Element not found: /Skin/Element[@name="PopupLeftButtonNormal"]
2010-11-10 21:43:10.138    [DEBUG][1]    Element not found: /Skin/Element[@name="PopupLeftButtonSelected"]
2010-11-10 21:43:10.143    [DEBUG][1]    alpha = 4
2010-11-10 21:43:10.148    [DEBUG][1]    alpha = 9
2010-11-10 21:43:10.153    [DEBUG][1]    alpha = 14
2010-11-10 21:43:10.153    [DEBUG][1]    alpha = 14
2010-11-10 21:43:10.173    [DEBUG][1]    alpha = 33
2010-11-10 21:43:10.193    [DEBUG][1]    alpha = 52
2010-11-10 21:43:10.213    [DEBUG][1]    alpha = 72
2010-11-10 21:43:10.228    [DEBUG][1]    alpha = 86
2010-11-10 21:43:10.248    [DEBUG][1]    alpha = 105
2010-11-10 21:43:10.268    [DEBUG][1]    alpha = 124
2010-11-10 21:43:10.288    [DEBUG][1]    alpha = 144
2010-11-10 21:43:10.308    [DEBUG][1]    alpha = 163
2010-11-10 21:43:10.328    [DEBUG][1]    alpha = 182
2010-11-10 21:43:10.348    [DEBUG][1]    alpha = 201
2010-11-10 21:43:10.368    [DEBUG][1]    alpha = 220
2010-11-10 21:43:12.684    [DEBUG][1]    Adding system LATM AAC decoder
2010-11-10 21:43:12.684    [ERROR][1]    Unable to find named decoder
2010-11-10 21:43:12.684    [DEBUG][1]    Adding system AC3 decoder
2010-11-10 21:43:12.684    [DEBUG][1]    about to load decoder
2010-11-10 21:43:12.695    [DEBUG][1]    added decoder to graph
2010-11-10 21:43:12.695    [DEBUG][1]    adding audio renderer: Default DirectSound Device
2010-11-10 21:43:12.745    [DEBUG][1]    Adding system MPEG1 Layer2 decoder
2010-11-10 21:43:12.745    [DEBUG][1]    about to load decoder
2010-11-10 21:43:12.757    [DEBUG][1]    added decoder to graph
2010-11-10 21:43:12.757    [DEBUG][1]    adding audio renderer: Default DirectSound Device
2010-11-10 21:43:12.787    [DEBUG][1]    Adding system MPEG2 decoder
2010-11-10 21:43:12.787    [DEBUG][1]    Adding EVR renderer
2010-11-10 21:43:12.857    [DEBUG][1]    about to load decoder
2010-11-10 21:43:12.872    [DEBUG][1]    added decoder to graph
2010-11-10 21:43:12.877    [DEBUG][1]    Static Reference clock set to: MPEG1 Audio Renderer
2010-11-10 21:43:13.438    [DEBUG][1]    Playback graph running...
2010-11-10 21:43:13.439    [DEBUG][1]    Graph filter list:
2010-11-10 21:43:13.439    [DEBUG][1]     - EVR Renderer
2010-11-10 21:43:13.439    [DEBUG][1]     - NPVR PES Collector (DVBSubs)
2010-11-10 21:43:13.439    [DEBUG][1]     - MPEG1 Audio Renderer
2010-11-10 21:43:13.439    [DEBUG][1]     - AC3 Audio Renderer
2010-11-10 21:43:13.439    [DEBUG][1]     - Microsoft DTV-DVD Video Decoder
2010-11-10 21:43:13.439    [DEBUG][1]     - Microsoft DTV-DVD Audio Decoder
2010-11-10 21:43:13.439    [DEBUG][1]     - AC3Filter
2010-11-10 21:43:13.439    [DEBUG][1]     - MPEG-2 Demultiplexer
2010-11-10 21:43:13.439    [DEBUG][1]     - NPVR TS Reader
2010-11-10 21:43:13.787    [DEBUG][1]    GetEventCode() returned: 0x000d
2010-11-10 21:43:13.787    [DEBUG][1]    GetEventCode() returned: 0x000e
2010-11-10 21:43:13.787    [DEBUG][1]    GetEventCode() returned: 0x8102
2010-11-10 21:43:13.787    [DEBUG][1]    Aspect ratio now: 4x3
2010-11-10 21:43:13.787    [DEBUG][1]    Resolution is now: 720x480
2010-11-10 21:43:13.787    [DEBUG][1]    GetEventCode() returned: 0x8101
2010-11-10 21:43:13.806    [DEBUG][1]    Using timing.info, jumping to time 62.560001 (offset 51455600)
2010-11-10 21:46:36.154    [DEBUG][1]    Using timing.info, jumping to time 415.950012 (offset 345318400)
2010-11-10 21:51:05.565    [DEBUG][8]    Weather:    "UpdateWeather"    ENTER - Auto Update Weather Information Thread
2010-11-10 21:51:05.567    [DEBUG][8]    Weather:    "UpdateWeather"    EXIT - Auto Update Weather Information Thread
2010-11-10 21:51:05.568    [DEBUG][4]    Weather:    "UpdateWeatherThread"    Waiting for mutex to release (Auto Update Weather Information Thread)...
2010-11-10 21:51:05.568    [DEBUG][4]    Weather:    "UpdateWeatherThread"    ...mutex entered (Auto Update Weather Information Thread)...
2010-11-10 21:51:05.568    [DEBUG][4]    Weather:    "DownloadWeatherFile"    Downloading weather file for profile 'default0'...
2010-11-10 21:51:05.570    [DEBUG][4]    Weather:    "DownloadWeatherFile"    Download weather file in metric selected.
2010-11-10 21:51:06.060    [INFO][4]    Weather:    "DownloadWeatherFile"    Weather file successfully downloaded for 'default0'.
2010-11-10 21:51:06.068    [DEBUG][4]    Weather:    "DownloadWeatherFile"    ...downloading weather file for profile 'default0' completed.
2010-11-10 21:51:06.068    [DEBUG][4]    Weather:    "ParseWeatherFile"    Parsing weather file for profile 'default0'...
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "ParseWeatherFile"    ...parsing weather file for profile 'default0' completed.
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "ParseLocationCodes"    Parsing location codes for profile 'default0'...
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "ParseLocationCodes"    ...parsing location codes for profile 'default0' completed.
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "IdentifyImagesForDownload"    Identifying images to download for profile 'default0'...
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "IdentifyImagesForDownload"    ...identifying images to download for profile 'default0' completed.
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "DownloadWeatherAlertFile"    Downloading weather alert file for profile 'default0'...
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "DownloadWeatherAlertFile"    CountryCode is not USA, skip downloading weather alert file.
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "ParseWeatherAlertFile"    Parsing weather alert file for profile 'default0'...
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    ...releasing mutex (Auto Update Weather Information Thread).
2010-11-10 21:51:06.072    [DEBUG][4]    Weather:    "LoadUI"    ENTER
2010-11-10 21:51:06.073    [DEBUG][4]    Weather:    "LoadUI"    screen elements not initialized and background thread is alive.
2010-11-10 21:51:06.073    [DEBUG][4]    Weather:    "LoadUI"    EXIT
2010-11-10 21:51:06.073    [DEBUG][4]    Weather:    "ResetAutoUpdateTimer"    Resetting the auto updating timer...
2010-11-10 21:51:06.073    [INFO][4]    Weather:    "ResetAutoUpdateTimer"    Next auto update at: 22:51:06.0731951
2010-11-10 21:55:57.222    [DEBUG][1]    Using timing.info, jumping to time 1157.619995 (offset 961897300)

line below added after playback resumed

Code:

2010-11-10 22:03:23.333    [DEBUG][1]    Using timing.info, jumping to time 1799.530029 (offset 1495403700)