2013-05-12, 05:22 PM
Not powered on = no output, no LEDs. The 3rd A-110 powered back on w/o issue. One of the others came back on after cycling the power switch a couple of times (switch contacts getting crudded up?), and the other appears to have a bad power brick. I swapped the power bricks between this and another and the problem follows the brick.
Okay, so I set the number of client servers to one and powered up each NMT individually, they all load NPVR and play video. I set the number of servers to five and restart NPVR services, then none of the NMTs will load NPVR. The A-110's start to load NPVR, go to the black screen, then return to the NMT GUI. The A-100 starts loading, goes to the black screen and never comes back.
Logs attached, should have both 1 server and 5 server logs, if it can be deciphered.
Thanks,
-Brad
Okay, so I set the number of client servers to one and powered up each NMT individually, they all load NPVR and play video. I set the number of servers to five and restart NPVR services, then none of the NMTs will load NPVR. The A-110's start to load NPVR, go to the black screen, then return to the NMT GUI. The A-100 starts loading, goes to the black screen and never comes back.
Logs attached, should have both 1 server and 5 server logs, if it can be deciphered.
Thanks,
-Brad
Server: Ryzen 5 3600 3.6GHz: 16GB RAM: ASRock Phantom D/RX570: SDD: 512GB HDDs: 5TB, 8TB, 8TB
Linux Mint v20, NPVR v5.1.3.210711
Tuners: Hauppauge PVR-2250-MC Dual Tuner, HDHR Duo ATSC Tuner
Clients: Knewc on CE-ODroid N2 x2, N2+, LE-RPi4, PCs x2
Linux Mint v20, NPVR v5.1.3.210711
Tuners: Hauppauge PVR-2250-MC Dual Tuner, HDHR Duo ATSC Tuner
Clients: Knewc on CE-ODroid N2 x2, N2+, LE-RPi4, PCs x2