ZProcess "76 Path not found" errors - sigh!

[zehd]

After thinking a bit more, I added some more logging...

Try this...

[antp]

Are you ever asked if you are using PAL or NTSC defaults?

No, I never had that prompt.

I haven't been clear, but I would like you to delete the ZProcess reg key at the beginning of a troubleshooting session... You should be able to do that with the included reg file...

I ran the .reg file for each test.

Maybe you should check the config.xml manually and remove all references to Zprocess. It's possible that when ZProcess starts it's checking if it's in the config or not and getting stumped there...

There is no reference to ZProcess in config.xml

Zip and attach your config.xml pls...

ok, attached bellow

Refer to the master config.xml to see how it should be in stock mode

No more luck using master file.

[antp]

After thinking a bit more, I added some more logging...

Try this...

2008-08-27 18:11:08 : 8 Mencoder path:
2008-08-27 18:11:08 : 12 VideoRedo path: C:\Program Files\VideoReDoPlus
2008-08-27 18:11:08 : 13 VideoRedo path:
2008-08-27 18:11:08 : 1 config.xml Path String: exe="ZTools\ZProcess2.exe"
2008-08-27 18:11:08 : 2 config.xml Path: F:\Multimedia\GBPVR\config.xml
2008-08-27 18:11:08 : Load frmConfig (frmMain Load)
2008-08-27 18:11:08 : 8 Mencoder path: C:\Program Files\mplayer
2008-08-27 18:11:08 : 12 VideoRedo path: C:\Program Files\VideoReDoPlus
2008-08-27 18:11:08 : 13 VideoRedo path:

[zehd]

2008-08-27 18:11:08 : 8 Mencoder path:
2008-08-27 18:11:08 : 12 VideoRedo path: C:\Program Files\VideoReDoPlus
2008-08-27 18:11:08 : 13 VideoRedo path:
2008-08-27 18:11:08 : 1 config.xml Path String: exe="ZTools\ZProcess2.exe"
2008-08-27 18:11:08 : 2 config.xml Path: F:\Multimedia\GBPVR\config.xml
2008-08-27 18:11:08 : Load frmConfig (frmMain Load)
2008-08-27 18:11:08 : 8 Mencoder path: C:\Program Files\mplayer
2008-08-27 18:11:08 : 12 VideoRedo path: C:\Program Files\VideoReDoPlus
2008-08-27 18:11:08 : 13 VideoRedo path:

Thanks for your patience...

It's obvious a couple of forms aren't loading, there would be log entries. I'm starting to narrow down the spot. Hang in there...

[antp]

Thanks for your time too, I hope that the problem is not my fault but depends on something else

[zehd]

Thanks for your time too, I hope that the problem is not my fault but depends on something else

I checked your config.xml. ZProcess doesn't seem to be upset by it...

Here's another try. I just updated the zprocess2.exe, (ztranscode will need to be updated before final use)

I have more logging, but turned off some that we've identified as working.

There was a bug with the zprocess reference in config.xml checker as it first tested for existence of gbpvr.exe, which no longer exists. I think we might be getting closer...

[zehd]

Thanks for your time too, I hope that the problem is not my fault but depends on something else

I have to admit that I was starting to lean toward blaming your system. But while troubleshooting I found at least one dependancy on the existence of 'gbpvr.exe' which will not exist anymore.

While troubleshooting, I'm trying to make sure that I'm not actually breaking ZProcess for the vast majority of happy users...

And yes, I have back ups...:eek:

[antp]

seems to give same result:

2008-08-29 16:39:44 : 8 Mencoder path:
2008-08-29 16:39:44 : 12 VideoRedo path: C:\Program Files\VideoReDoPlus
2008-08-29 16:39:44 : 13 VideoRedo path:
2008-08-29 16:39:44 : 1 config.xml Path String: exe="ZTools\ZProcess2.exe"
2008-08-29 16:39:44 : 2 config.xml Path: F:\Multimedia\GBPVR\config.xml
2008-08-29 16:39:44 : Load frmConfig (frmMain Load)
2008-08-29 16:39:44 : 8 Mencoder path: C:\Program Files\mplayer
2008-08-29 16:39:44 : 12 VideoRedo path: C:\Program Files\VideoReDoPlus
2008-08-29 16:39:44 : 13 VideoRedo path:

[zehd]

Very sorry. The last zip did not have the most current patch and logging...
Try this one... it's version .263

[antp]

Now it asks me if I want PAL or NTSC, and then it starts to loop
And it asks again when I start it again

2008-08-30 10:10:52 : frmconfig.LoadPaths after got GBPVR Path
2008-08-30 10:10:52 : 13 VideoRedo path:
2008-08-30 10:10:52 : Done frmconfig.LoadPaths
2008-08-30 10:10:52 : loading frmmain settings)
2008-08-30 10:10:52 : EnumZProcessProfiles
2008-08-30 10:10:52 : Created Cache folders: E:\Temp\GBPVR\MVP_Cache\20080830\ZProcess2.log
2008-08-30 10:10:52 : FirstRunDebug before frmConfig: True
2008-08-30 10:10:52 : Load frmConfig (frmMain Load)
2008-08-30 10:10:52 : frmconfig.LoadPaths after got GBPVR Path
2008-08-30 10:10:52 : 13 VideoRedo path:
2008-08-30 10:10:52 : Done frmconfig.LoadPaths
2008-08-30 10:10:52 : Load TranscodeDefaults becuase it's first run