Analog TV config help nedeed

[aiacel]

Thank you, I'm happy because you remeber about my request in the new realise. I've just installed the 99.5 and now the graph works with a few issues:
1) It samples ever at 29,97fps but I'm in PAL region so I need 25 fps (this cause ugly stutter)
2) It samples ever at 320x240. I've tried to chang settings (high, medium, etc.) but nothing

Could you hel me again ?
Tahnk you

[sub]

1) It samples ever at 29,97fps but I'm in PAL region so I need 25 fps (this cause ugly stutter)

The driver is supposed to take card of this automatically, but you could try forcing it by setting ForceStandard=16 in direct.ini for PAL B/G or ForceStandard=256 for PAL I.

2) It samples ever at 320x240. I've tried to chang settings (high, medium, etc.) but nothing

GB-PVR wont be able to set the resolution with this device, so you'll get whatever the driver default is.

[aiacel]

1) I can't stop to say "Thank you".

2) I've tried ForceStandard=16 in direct.ini but nothing changed. Playing "lastgrapg.grf" i found that everything is setted at the right PAL-B, but the recoreded file is ever 29,97 insteed 25 fps. Could it be a missing encoder setting ?

3)Could I set resolution, fps, quality, etc by "regedit" in the register file ? Any advice about that?

Thank you again

[sub]

1) I can't stop to say "Thank you".

No worries.

2) I've tried ForceStandard=16 in direct.ini but nothing changed. Playing "lastgrapg.grf" i found that everything is setted at the right PAL-B, but the recoreded file is ever 29,97 insteed 25 fps. Could it be a missing encoder setting ?

This was pretty much the only thing I could think of that might of helped.

3)Could I set resolution, fps, quality, etc by "regedit" in the register file ? Any advice about that?

Maybe, but I dont know where your card might store these defaults. There is no standard registry location for where devices store their configuration.

[aiacel]

I've played with graphedit and I found that the issue is in the capture pin. As you can see in the attached image, video standard is right setted as PAL_B but it writes a wrong frame rate= 29,97 fps and a poor "320x240 (default)"
How can I change frame rate to 25fps and frame size to 720x576?
Thank you again

[sub]

How can I change frame rate to 25fps and frame size to 720x576?

There is no way GB-PVR can do it via this this pin. The MPEG encoder cards GB-PVR support set the resolution a different way, and I never attempt to set the fps anywhere - all the supported cards do this automatically.

[sub]

I've added something that might help for the next release.

[sub]

You could try the attached patch to see if it helps. It'll try to set the resolution for you.

It'll also try to set the frame rate if you add the following to the [SETUP-Main] section direct.ini

Code:

ForceFrameRate=25        // 0:Auto, 25:PAL, 30:NTSC (it'll do 29.97)

[aiacel]

YOU ARE SIMPLY THE BEST !!!

I had several attempts but at the end it works perfectly : 25fps @ 720x576.
I really have to thank you


The only weird is that I have to use ATI MPEG Encoder instead Cyberlink because also if now the "ForceFrameRate=25" setting forces the Capture PIN at the 25fps ( I verified that), Cyberlink encodes at 29,97....weird.

[sub]

No worries, glad you got it all working.