Choose Capture Source device

[sub]

For example does the Nova-SPlus have a CSA chip or am I forced to use CPU.

The CSA stuff is all done in software with GB-PVR, using ffdecsa,dll, regardless of what card or multidec plugin you're using.

How do I setup vplug so it stops bitching about missing keys (since it seems to have the keys I need for the channels I want)?

Unfortunately, this discussion is crossing over the line of what cant be discussed here on the GB-PVR forums. You'd really need to ask questions like this on other forums (http://dvbn.happysat.org for example).

[flyswatta]

Are you sure your LNB settings are correct?


Try


LOF1 9750
SW 11300
LOF2 10600


I think the above are the commonest settings for Ku Band LNBs.

Kev

Soccerdad has been helping me setup my sat card in another thread. He mentioned that he's using:

LOF1= 11250 mhz, 0 =switch and O =LOF 2.

And he's located in South Carolina, US. Not sure if that's much help.

[volksman]

The CSA stuff is all done in software with GB-PVR, using ffdecsa,dll, regardless of what card or multidec plugin you're using.

Really? Wow....I read it that if you had a card with CSA it would all be handled by the card....So is the difference then that the card would just handle MORE than a card without? IE identical setup but Nexus vs Nova the Nova machine would carry a larger load on the CPU?

Unfortunately, this discussion is crossing over the line of what cant be discussed here on the GB-PVR forums. You'd really need to ask questions like this on other forums (http://dvbn.happysat.org for example).

Understood. End of thread in discussion...

[volksman]

Soccerdad has been helping me setup my sat card in another thread. He mentioned that he's using:

LOF1= 11250 mhz, 0 =switch and O =LOF 2.

And he's located in South Carolina, US. Not sure if that's much help.

Excellent! I will try that again when I get back into it (going to order up some parts before going forward with DVB so I have a test machine and a live one..Otherwise I get 15 minutes a day before wife gets home...hahaha).

Thanks for the settings though! I believe that is the way it "should" be setup based on all the reading I have done, however the settings I posted DO work as well...My missing channels are due to another problem I believe.

[sub]

Really? Wow....I read it that if you had a card with CSA it would all be handled by the card....

Thats only the case if you're using real CAM modules. When you use multidec, you're using softcams and everything is done in software.