Cyberlink Mux won't record certain channels properly

[allstarnz]

I have had this issue in many builds on more than one PC.

I install the Cyberlink Mux (MpgMux_5.0.0.1307_.ax) on my PC, then try and record either Stratos or Parliament TV (both NZ satellite channels), they both end up with really choppy footage.

I deregister the Cyberlink mux and record in DVR-MS and the footage is generally perfect or close to it.

Has anyone got any ideas what this mux would do to cause this? I can live with the work around, but would prefer to use Cyberlink.

It's not the PC, as it's only using 10% CPU maximum. All other channels are fine.

Card: Hauppauge HVR3000 using DVB-S
CPU: Intel Quad Core Q6600

[stustunz]

damn i was actually hoping it was my card but yours is different so there goes that plan

you know you dont have to deregister the mux to select dvr-ms one you can just select it in config then save

[sub]

I havnt noticed this myself, though admittedly I dont watch or record much off stratos or parliament tv. Have you tried the ATI mux to see if it gives you the same problem?

[sub]

Is it every recording on Stratos, or just some? I just tried a quick recording and it seems to be ok for me. Here is a one minute recording: http://www.gbpvr.com/STRATOS_20071119053900.mpg (34MB)

[allstarnz]

hmm, that seems to be perfect.

what mux were you using for that sub?

can one still use an ATI mux with a nVidia card? Where can i get that mux from?

I tried it using the mainconcept mux and it still did the same.

[sub]

That was with the Cyberlink v5.0.1307 mux, but I also get a perfect recording from the ATI mux. You can get it from here: http://www.gbpvr.ynosgroup.com/ati-mux/

[stustunz]

sub what dish are you using and what lnb do you use im wondering if my old sky lnb is causing my signal to be weaker than it should be?

[sub]

I'm using a 1 meter dish with three LNBs. I cant remember the exact brands. I bought them a few years back.

[stustunz]

ok bigger dish stronger signal
3 lnbs ok
so you have 3 cables going to 3 cards so they can use either H or V is that the reason

[sub]

I have one cable and a diseqc switch. Its so I can look at three satellites that are a few degrees apart in the sky.