Does gbpvr support evga nvidia dual tuner

[den372]

Hi I have an evga nvidia dual tv tuner capture card. I was wondering if anybody had happened to get this device working in gbpvr. I used it in MCE 2005. I noticed that in the capture source drop down box there is a an option for nvtv1 and nvtv2. I tried these but to no avail. Any advice/comments appreciated.

[whurlston]

Run filtercheck.exe and zip and post the resulting filtercheck.log

[den372]

Here is the zip file

[sub]

I dont really know if it'll work on not, but try adding the following in direct.ini:

[Nvidia NVTV]
INIT_MODE=VIXS
INIT_MSP=0
SUPPORTS_FM_RADIO=1
BLACKBIRD=1
CONEXANT=1
FILTER_CROSSBAR=NVTV Crossbar
FILTER_CAPTURE=NVTV
FILTER_TV_TUNER=NVTV Tuner
FILTER_TV_AUDIO=NVTV Audio
FILTER_ENCODER=NVTV Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CAPTURE_ANALOG_AUDIO_IN=Input4
PIN_CAPTURE_I2S_OUT=Output0
PIN_CAPTURE_656_OUT=Output1
PIN_CAPTURE_PREVIEW_AUDIO_OUT=PCM Out
PIN_ENCODER_I2S_IN=Input1
PIN_ENCODER_656_IN=Input1
PIN_ENCODER_OUT=Video Pes
PIN_WRITER_INPUT_IN=Input

[den372]

Thanks for the quick reply Sub I will give it a try

[den372]

Thanks for the quick reply Sub I will give it a try

[den372]

HI I updated the direct.ini file with the above configuration info. I did not receive the "this hardware appears to not match the drivers " dialog, Then I updated the EPG for this recording source ok. I then exited out of config and fired up pvrx2. I elected tv guid and selected a channel. When I clicked on the channel it bounced me back out to the guide again. During this test I do not have the cable attached to the capture card (the cable is damaged and I am in the process of replacing the cable), but I do not think that should make a difference. I was hoping to see white noise. Is this correct?

[sub]

Reproduce this, then zip and attach the logs and I'll take a look.