Blank screen during playback and timeshift V1.3.7

[Sunken]

Reverted back to 1.2.13 and working great, but still having timeline issues so I am determined to get 1.3.7 sorted.
I don't known what to do now. The end result at the moment is that I have video and audio for playback on TV 1,2,4 etc ( non H.264). However have video but no audio for TV3. Tried reinstalling and reregistering monogram decoder incase it was corrupt - no difference.
I am no computer wiz but have opened a TV3 file in Monogram graph studio and the audio pin from the TS file is connected to an MPA decoder filter which then is routed to the Default wave out device via a Morgan stream switcher. This doesn't make a lot of sense to me as I have monogram aac decoder selected in playback properties for the advanced codec so don't know why grahp studio is showing the MPA decoder????? This Graph studio looks like a very powerful tool but are there any instructions for use??? I'm just scratching the surface at the mo!!?
Also in the AC3 filter properties under system should filter merit be prefer AC# filter or doesn't it matter as I already have monogram selected in the advanced codec properties of GB PVR playback?

I will submit my logs shortly

Thanks to anyone that can help. This is the only issue I have left with 1.3.7 ( at this point in time)

Cheers. Fantastic program

[Sunken]

see logs
.
Thanks

[Sunken]

Bump for anyone?

Thanks

[sub]

I'd try removing that Morgan Stream Switcher. This has caused problems for some users in the past.

[Sunken]

Thanks for sticking with me Sub

OK deregistered morgan switcher and graph studio now has MPA decoder filter between the file and the default wave device. Hard reboot and still no audio in GBPVR? Deregistered MPA and it has defaulted to Intervideo Audio decoder in Graph studio.
Can get audio in media player classic. It is like PVR just doesn't see monogram, but it is there in config???
Logs attached from removal of morgan switcher.

Thanks. Maybe I should just stick with 1.2.13 untill the next release and see if that provides a fix?

[sub]

OK deregistered morgan switcher and graph studio now has MPA decoder filter between the file and the default wave device. Hard reboot and still no audio in GBPVR? Deregistered MPA and it has defaulted to Intervideo Audio decoder in Graph studio.
Can get audio in media player classic. It is like PVR just doesn't see monogram, but it is there in config???

Your logs seem to show the app is trying to use AC3, so dont worry about the 'audio' and 'AAC'. Only the AC3 pin is delivering data.

I seem to remember there was an AC3Filter option to select the fault renderer. Try setting it to 'Use Direct Sound' instead of 'Use Wave Out'.

Thanks. Maybe I should just stick with 1.2.13 untill the next release and see if that provides a fix?

Can do if you want, but there is a good chance it'll be exactly the same.

[Sunken]

Changing that setting to Direct Sound has done the trick. Thanks Sub.
The only thing I note is that the volume level on live TV and recorded files that are not TV3, is much louder than with the TV3 recorded audio level. They are using different decoders I take, but it would be nice to get them the same level.
Minor problem but any ideas off the top of your head?

Thanks heaps Sub
Duncan

[sub]

Changing that setting to Direct Sound has done the trick. Thanks Sub.

Great.

The only thing I note is that the volume level on live TV and recorded files that are not TV3, is much louder than with the TV3 recorded audio level. They are using different decoders I take, but it would be nice to get them the same level.
Minor problem but any ideas off the top of your head?

Sorry, I dont know.