Logs are attached, plus checker output. I powered off everything and restarted. Symptoms have changed. Now after I just get a blank screen after selecting 'NPVR' at the selection screen
quote
Checking for mvpmc share on MEDIASERVER
mvpmc C:\mvpmc
Checking GB-PVR.html links
C:\mvpmc \GB-PVR.html not found
NMT IP Address: 192.168.0.50 MAC 0006DC42F342
GB-PVR Not Installed
N-PVR Installed C:\Users\Public\NPVR
<a href="http://localhost.drives:8883/NETWORK_SHARE/MEDIASERVER:mvpmc/npvr.cgi">N-PVR</a>
<a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
<a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>
Changed everything to MEDIASERVER, same result. Attached new set of Logs just in case. Should i try changing everything to 192.168.0.3. And what is everything - just the NMT setup or somewhere else too? Checked NEWA working through broswer, OK. Checker still shows 'Unable to connect to the remote server'
Unless the syntax check gives you the "The remote server returned an error: (404) Not Found." message, the web server is not running properly and there is nothing that NMT configuration can do to help this.
I'd first make sure that firewalls and antivirus apps aren't getting in your way. Are you checking NEWA access from a remote PC on your network?
mvallevand Wrote:Unless the syntax check gives you the "The remote server returned an error: (404) Not Found." message, the web server is not running properly and there is nothing that NMT configuration can do to help this.
I'd first make sure that firewalls and antivirus apps aren't getting in your way. Are you checking NEWA access from a remote PC on your network?
Martin
I check NEWA from another PC on the network. Maybe its something to do with the network. The machine supplying DNS and DHCP services was the one that crashed and caused all this trouble. I'll struggle on on this track
The syntax checker is now giving me a "The remote server returned an error: (404) Not Found." message
I clearly have a connection
This has to be a mvpmcx2 problem.
I can play videos through the network browser (ie from the NPVR recordings) and directly from the mvpmc directory, but not through the normal interface.
Pease help
Current logs attached
StevHodge Wrote:The syntax checker is now giving me a "The remote server returned an error: (404) Not Found." message
I clearly have a connection
This has to be a mvpmcx2 problem.
I can play videos through the network browser (ie from the NPVR recordings) and directly from the mvpmc directory, but not through the normal interface.
Pease help
Current logs attached
You have to tackle problems one at a time and the key one is the web server. Assuming the web server is working you have to turn off all of your mvp server except one and try again so I can see your logs. I now see the NMT syntax check attemps in the logs.
Also just in case make sure you have the NextPVR version of mvpmcx2 the old old GBPVR version doesn't work.
Thanks martin
Did the following:
(1) Downloaded and re-installed mvpmcx2 via NMTInstall2 - time stamp 27/3/14, 463 kb
(2) turned off all the NMTs and also a raspberry pi which runs subs plug-in (works fine BTW)
(3) turned off mediaserver (192.168.0.3) and restarted from cold
(4) restarted one NMT from cold (192.168.0.50)
(5) ran syntax checker (output below)
(6) loaded NPVR on NMT - result 'request cannot be processed'
(7) stopped nrecord so as to zip logs (Note: the first time round the mvp log would not zip, it stayed locked, had to logoff and on again, and do it all again). Logs attached
Bed tine now!
Steve
Checking for mvpmc share on MEDIASERVER
mvpmc C:\mvpmc
Checking GB-PVR.html links
C:\mvpmc \GB-PVR.html not found
NMT IP Address: 192.168.0.50 MAC 0006DC42F342
GB-PVR Not Installed
N-PVR Installed C:\Users\Public\NPVR
<a href="http://localhost.drives:8883/NETWORK_SHARE/MEDIASERVER:mvpmc/npvr.cgi">N-PVR</a>
<a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
<a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>
Enabled true
Port 8866
The remote server returned an error: (404) Not Found.