FM Radio

[pcostanza]

Got the latest update for FM radio but can't figure out what I need to do to use it. I downloaded the lame filter and copied it to the gbpvr directory but what else is needed?

Thanks

[sub]

You dont need to use the lame filter unless you're listing to the radio via MVP/PVR350/XCard.

Just hit the scan button to add your stations.

[pcostanza]

Thanks sub but I am using the pvr350 & MVP and while it scans fine, I hear nothing. Where does the lame file go?

Really enjoy the update. Thanks
Paul

[sub]

When I mentioned PVR350 above, it's only if its being used with the tv out.

Try using the add button instead. If that doesnt work post your gbpvr.exe-native.log.

If the 'scan' button is visible, then you dont need the lame encoder. You'll notice the 'scan' is not present when accessing via the MVP.

Where does the lame file go?

Anywhere you want, but you do need to register it.

[pcostanza]

I do have a scan button but think I already had installed lame a while back for some other program.
I added 2 stations manually and can see the recording service working but can't hear anything nor can I find any file it might have saved (if any).
Here's the log:
16:19:46.640 INFO Log started
16:19:46.640 VERBOSE getSetting(ShowClosedCaptions)
16:19:46.640 VERBOSE getSetting(UseFFDSHOW)
16:19:46.656 VERBOSE getSetting(EnableTeleText)
16:19:46.656 VERBOSE getSetting(HorizontalZoom)
16:19:46.656 VERBOSE Horizontal Zoom: 1.050000
16:19:46.656 VERBOSE getSetting(VerticalZoom)
16:19:46.656 VERBOSE Vertical Zoom: 1.000000
16:19:46.656 VERBOSE getSetting(HorizontalOffset)
16:19:46.656 VERBOSE Horizontal Offset: 0
16:19:46.656 VERBOSE getSetting(VerticalOffset)
16:19:46.656 VERBOSE Vertical Offset: 0
16:19:46.656 VERBOSE getSetting(LiveTVPrePlayDelay)
16:19:46.656 VERBOSE getSetting(OSDTransparency)
16:19:46.656 VERBOSE getSetting(AspectRatio0)
16:19:46.671 VERBOSE getSetting(AspectRatio1)
16:19:46.671 VERBOSE getSetting(AspectRatio2)
16:19:46.671 VERBOSE getSetting(AspectRatio3)
16:19:46.671 VERBOSE getSetting(AspectRatio4)
16:19:46.671 VERBOSE getSetting(TeletextRect)
16:19:46.671 VERBOSE MinimumFilePlaySize=200000
16:19:46.875 VERBOSE DirectShowPlayerVMR9() initialising...
16:19:46.875 VERBOSE getSetting(OSDTransparency)
16:19:58.156 VERBOSE ConexantRecorder::StartRecording(1, 0, 94200000, 0)
16:19:58.234 VERBOSE Loading filter names
16:19:58.234 VERBOSE Found names:
16:19:58.234 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
16:19:58.234 VERBOSE Hauppauge WinTV PVR PCI II Capture
16:19:58.234 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
16:19:58.234 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
16:19:58.750 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
16:19:59.703 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
16:20:05.328 VERBOSE put_Mode(AMTUNER_MODE_FM_RADIO)
16:20:05.359 VERBOSE put_Channel(94200000, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
16:20:05.890 VERBOSE getSetting(ListGraphFilters)
16:20:05.890 VERBOSE Graph contains the following filters:
16:20:05.890 VERBOSE - Default DirectSound Device
16:20:05.890 VERBOSE - Capture
16:20:05.890 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
16:20:05.890 VERBOSE - TV Audio
16:20:05.890 VERBOSE - TV Tuner
16:20:05.890 VERBOSE getSetting(SaveGraphFiles)
16:20:05.906 VERBOSE ConexantRecorder::StartRecording() done
16:20:44.015 VERBOSE SetFrequency(94200000)
16:21:10.515 VERBOSE SetFrequency(89100000)
16:21:16.218 VERBOSE SetFrequency(92300000)
16:21:19.265 VERBOSE SetFrequency(92300000)
16:22:00.781 VERBOSE SetFrequency(99500000)
16:24:51.359 VERBOSE ConexantRecorder::StopRecording()

Thanks again sub.

[pcostanza]

Sub,
I did nothing at all except to burn a tv program to dvd and now the FM is working. How could that have anything to do with it? It's playing fine and I don't need to waste your time or mine figuring out why it works as long as it does.
Sorry for the bother.

Paul

[sub]

Good. One less thing to worry about...

[postaldave]

When I mentioned PVR350 above, it's only if its being used with the tv out.

If the 'scan' button is visible, then you dont need the lame encoder. You'll notice the 'scan' is not present when accessing via the MVP.


Anywhere you want, but you do need to register it.

i'm using the TV so i guess i do need lame.

1.which lame do i need, there seems to be allot?

2. how do you resister it?

[sub]

1) You need the mentioning in the release announcement - http://www.elecard.com/ftp/pub/directsho..._dshow.zip

2) regsvr32 lame.ax

[postaldave]

i tried that.
got "loadlibrary("lame.ax") failed - The specified module could not be found.


i also tried config>playback>none-use software decoder

this brought up the "scan function" but didn't pick up any station except in the 107+ range. the lower range didn't pick up anything and after 107 it picked up fuzz. i got the fm wires hooked up on the pvr350 correctly and it just doesn't work. living in lexington ky we have some very hot radio signals i can't see why it wouldn't work.

is this function tested with the PVR350?