popcornhour a100 client not connecting to host pc

[Halls9999]

Hi Wondering if someone could take a look at the attached logs and guide me in the right direction.
Had a power trip last week and had to reboot host pc. On reboot , the pc normally ends up with a new ip address and I have to change the npvr cgi file to match the new ip. After doing this normally works fine.

This time however, cant access via popcornhour and just keep getting request cannot be processed

I have attached the logs and the output from the syntax checker

Any direction much appreciated

regards steve

Checking for mvpmc share on MYDESKTOP
mvpmc C:\mvpmc

Checking GB-PVR.html links
C:\mvpmc \GB-PVR.html not found

MAC

GB-PVR Installed

GB-PVR previously uninstalled

N-PVR Installed C:\Users\Public\NPVR
<a href="http://localhost.drives:8883/NETWORK_SHARE/MYDESKTOP:mvpmc/npvr.cgi">N-PVR</a>
<a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
<a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>


Enabled true
Port 8866

Unable to connect to the remote server

Checking NMT Version

Checking NMT Display

Calling NMT Source

[mvallevand]

Lots of errors with your setup,

- TV Listing is failing because you need a newer version I you don't want to upgrade disable it.

- the MVP server is failing for an unknown reason

Code:

2016-04-30 13:51:49.104    [ERROR][6]    Unexpected error starting MVP Server: System.ComponentModel.Win32Exception (0x80004005): No such interface supported
   at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
   at System.Diagnostics.Process.Start()
   at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
   at NRecord.MVPManager.WorkerThread()

- it looks like the web server is failing.

- not sure if you entered the NMT IP address if you did you have other network problems, unplug routers and switches.

First, I'd reboot the PC and try to access thew NEWA web server with a browser.

A long term fix is to assign a static IP to you backend.

Martin

[Halls9999]

Hi Martin

Turned off everything and rebooted

updated tv listing

Tried to access via browser by typing in http://192.168.0.4:8866 but no joy


Getting this now so going to take a look at virgin router to see if logs can give me a clueThis site can’t be reached

192.168.0.1 refused to connect.
ERR_CONNECTION_REFUSED



regards steve

[Halls9999]

Hi Martin

Turned off everything and rebooted

updated tv listing

Tried to access via browser by typing in http://192.168.0.4:8866 but no joy


Getting this now so going to take a look at virgin router to see if logs can give me a clueThis site can’t be reached

192.168.0.1 refused to connect.
ERR_CONNECTION_REFUSED



regards steve

Hi Martin

Dopey me wrong ip address

Can now acccess popcorn via webrowser
Can also access hard drive on mydesktop where npvr resides
Noticed that the npvr . html file has a different number ie 8883 rather than the 8866 used by the webrower. Are these port numbers. Should it be 8883?

regards steve

[mvallevand]

Hi Martin

Dopey me wrong ip address

Can now acccess popcorn via webrowser
Can also access hard drive on mydesktop where npvr resides
Noticed that the npvr . html file has a different number ie 8883 rather than the 8866 used by the webrower. Are these port numbers. Should it be 8883?

regards steve

8883 is the NMT web server 8866 is the default for NEWA but others ports are required. Not sure where you stand now, if it is not working update the logs and the syntax check out again

Martin

[Halls9999]

[quote=mvallevand]8883 is the NMT web server 8866 is the default for NEWA but others ports are required. Not sure where you stand now, if it is not working update the logs and the syntax check out again

Martin[/QUOTE

Hi Martin

Here is the latest checker log and log files

Much appreciated

steve

[Halls9999]

Checking for mvpmc share on MYDESKTOP
mvpmc C:\mvpmc

Checking GB-PVR.html links
C:\mvpmc \GB-PVR.html not found

MAC

GB-PVR Installed

GB-PVR previously uninstalled

N-PVR Installed C:\Users\Public\NPVR
<a href="http://localhost.drives:8866/NETWORK_SHARE/MYDESKTOP:mvpmc/npvr.cgi">N-PVR</a>
<a href="http://localhost.drives:8866/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
<a href="http://localhost.drives:8866/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>


Enabled true
Port 8866

The remote server returned an error: (404) Not Found.

Checking NMT Version

Checking NMT Display

Calling NMT Source

[Halls9999]

Hi

Did change the npvr file port from 8883 to 8866 to see if that made a difference. Will change back and re run the checker sorry

Still the same error. Not sure where to start to check what is at fault?

Checking for mvpmc share on MYDESKTOP
mvpmc C:\mvpmc

Checking GB-PVR.html links
C:\mvpmc \GB-PVR.html not found

MAC

GB-PVR Installed

GB-PVR previously uninstalled

N-PVR Installed C:\Users\Public\NPVR
<a href="http://localhost.drives:8883/NETWORK_SHARE/MYDESKTOP:mvpmc/npvr.cgi">N-PVR</a>
<a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
<a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>


Enabled true
Port 8866

The remote server returned an error: (404) Not Found.

Checking NMT Version

Checking NMT Display

Calling NMT Source

[mvallevand]

Still the same error. Not sure where to start to check what is at fault?

The 404 error is a good thing. The only other error showingis you still haven't input the NMT IP address. You also don't have a PCH2 entry in config.xml for your MAC address.

You still are getting a TV Listings error so I recommended removing it until it is fixed.

Where are you watching Live TV? I can't figure it out from these logs?

Martin