tuner reconized as IPTV Device unknown how to scan for channels?

[Steve123X]

Haugppage 1800 ASTC tuner reconized as IPTV Device unknown how to scan for channels?

when attempting to import message reads m3u url (required) guide xmltv url (optional)
this device currently has no channels hit scan or import buttons to add channels to this devise.

device status no devices are currently active.

thanks for advise

[mvallevand]

That's not right, maybe do a ctrl-f5 to refresh the screen and click on the ATSC line. If the ATSC line doesn't show send the zipped logs.

Martin

[sub]

Haugppage 1800 ASTC tuner reconized as IPTV Device unknown how to scan for channels?

FYI, it always adds the IPTV device, for anyone that wants to add IPTV channels. So basically it’s not seeing your device at all. Do you have the drivers for the device installed?

[Steve123X]

I believe the haupage 1800 has the drivers builtin however the haupage 2250 now requires drivers that they sell.

additionally when I was using windows media center before playready ruined wmc it never asked for drivers I simply physical presssed the modules into the PCI slots.

so to answer the ? no I haven't got the drivers do you have these drivers for my haupage? since I'm planing to use a small form factor PC I'm concidering purchasing the silicondust homerun duo tuner.the HDHR4-2US and a HDHR3-US tuner, supporting ATSC broadcast formats
currently I have the lid off the small form pc w/ the haupage modules sticking out.
thanks

[mvallevand]

No from Hauppauge you can still get drivers without the license for WinTV. Even installing WinTV I think you get an option to install the drivers first.

Martin

[sub]

You can download the Hauppauge drivers from their HVR-1800 page https://www.hauppauge.com/pages/support/...r1800.html

The driver installer is here: https://s3.amazonaws.com/hauppauge/drive...-39012.exe

[Steve123X]

ok so this is a 2step process? I've attempted both installations each say the devise is not found check to see if the module is inserted in PCI port which I did I evn swapped each other ports. maybe windows 10 doesn't reconize the haugpage 1800 an the 2250?
will the silicondust homerun duo tuner.the HDHR4-2US and a HDHR3-US tuner, supporting ATSC broadcast formats work w/ windows 10 pro? thanks

[mvallevand]

There is a related thread on this https://forums.nextpvr.com/showthread.php?tid=66516 so maybe wait to read what briantho hears.

The HDHR devices will work fine, but at the same time they aren't better at receiving than Hauppauge. You can get multi-rec with Hauppauge. Sounds like you are looking at used devices, personally I'd consider the ATSC 3 HDHR since it's a quad tuner.

Martin

[Steve123X]

You can download the Hauppauge drivers from their HVR-1800 page https://www.hauppauge.com/pages/support/...r1800.html

The driver installer is here:  https://s3.amazonaws.com/hauppauge/drive...-39012.exe

is this the driver DL?

[mvallevand]

Why not just download the drivers in red here https://www.hauppauge.com/pages/support/...r1800.html and here https://www.hauppauge.com/pages/support/...r2250.html Maybe not 100% clear but try a little harder.

For NextPVR read the wiki carefully before posting, I hate the thought we might have to spoon feed you through this. If its on the wiki I won't respond.

Martin