2006-01-15, 07:13 PM
I don't know much about graphics cards with TV-out. I assume they all use S-Video??? What is the max. recommended cable length (assuming I use quality cable etc.)?
2006-01-15, 07:13 PM
I don't know much about graphics cards with TV-out. I assume they all use S-Video??? What is the max. recommended cable length (assuming I use quality cable etc.)?
2006-01-15, 07:35 PM
If you believe PCzapper.nl you can reach 15 meters with a high quality cable.
I tried 10 meters with S-Video and a not so good cable and the result is "not so good" so buy a good cable.
P4 3GHz 1GB, 250GB, nVidia dualTV, GBPVR 1.3.11, XP
Support Comskip, visit the forum and donate at http://www.comskip.org/
2006-01-15, 07:52 PM
erik Wrote:If you believe PCzapper.nl you can reach 15 meters with a high quality cable.Thanks for the reply. I was worried it was maybe only 2-3m. The run I'm thinking of would only be 5m at the most. Cheers, Brian
2006-01-15, 08:41 PM
I'd still suggest you buy a good cable, even at 5m
2006-01-15, 11:54 PM
smeghead Wrote:I'd still suggest you buy a good cable, even at 5mWhat I was intending to do. ![]() I need to source 'unmade' cable though. I'd terminate both ends myself. I don't want a hole in my living room ceiling big enough to pass the connectors through. Cheers, Brian
2006-01-16, 06:40 AM
Might be easier to buy a made one and unsolder/resolder the connector at one end after fitting . . .
Shuttle SN41G2: Athlon2600; 1.5GB; WD120GB; Lacie 250GB Firewire; Nova-T USB2; PVR 150 Retail controlling Pace Sky STB via IR Blaster; MediaMVP x6
2006-01-17, 12:23 AM
ArfurAnt Wrote:Might be easier to buy a made one and unsolder/resolder the connector at one end after fitting . . .Duh! You're right. That'd probably be easier - I must remember to put my brain in before thinking. ![]() Cheers, Brian
2006-01-18, 08:39 AM
I use 10 m high quality scartcable with no loss of quality compared with my shorter cables. My TV is not a super TV. Maybe I could detect quality differences if it was, I can't judge.
/Marpe
2006-01-18, 09:14 AM
marpe, do you use tv-out on the 350 or on the epia?
I'm not always right
GB-PVR 1.2.9 Accent HT-400 Case, AMD Athlon 64 3800+ 1024MB, 1TB+300GB+180GB, WinXP Pro-SP2, NVidia 7600GT Nova-T USB2, PVR-350 recording from Dilog 355 DVB-T box, USB-UIRT (receiving & transmitting)
Stefan, I use tv-out on the Hauppauge 350.
Edit: More info about my connections From 350 -> VHS Scart in (original cable) -> scartplugg out with extra audio + scart -> audio to amplifier + HIFI-scart 10 m to TV (PAL) I got good audiosync no matter if I use audio from amplifier or audio TV. It is possible that my VHS gives a better signal out than it got in, allthough it´s in stand by-mode. I can only guess that the signal is the same. TV-cable (coax) -> VHS -> 350. Motherboard audio -> amplifier as well. I use the same ground for the entire system to avoid issues. |
|