to start off, I love GBPVR! I've had it running and working for about 2 weeks now.
I'm currently having one of those "This shouldn't be happening" problems. I used GBPVR last night just before going to bed and it was working perfectly. This morning i woke up, go to check GBPVR and neither the viewer or the config work.
i get this error when opening config:
config.exe - Common Language Runtime Debugging Services
Application has generated an exception that could not be handled.
Process id=0xb50928960, thread id=0x238 (568). - [numbers on this line change each time]
click OK to terminate the application.
click CANCEL to debug the application.
pressing cancel brings up:
Config.exe - No debugger found.
Registered JIT debugger is not available. An attempt to launch a JIT debugger with the following command resulted in an error code of 0x2 (2). Please check computer settings.
cordbg.exe !a 0xb50
Click Retry to have the process wait while attaching debugger manually.
Click cancel to abort the Jit debug request.
shouldn't this at least open with DrWatson?
i get this error when opening GBPVR:
GBPVR.exe - Common Language Runtime Debugging Services
Application generated an exception that could not be handled.
Process id=0xe34 (3636), Thread id=0xa0 (160).
Click OK to terminate the application.
Click CANCEL to debug the application.
pressing cancel brings up the same error window as config.
when starting the GBPVR tray process i get this error:
Microsoft .NET Framework
An unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. if you click Quit, the application will be shut down immediately.
There is an invalid character in the given encoding, Line 62 position 26.
Details:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Xml.XmlException: There is an invalid character in the given encoding. Line 62, position 26.
at System.Xml.XmlScanner.GetChars(Byte[] srcBuffer, Int32& srcOffset, Int32 srcLen, Char[] destBuffer, Int32 destOffset, Boolean zeroedOut)
at System.Xml.XmlScanner.Read()
at System.Xml.XmlScanner.ScanName()
at System.Xml.XmlScanner.ScanMarkup()
at System.Xml.XmlScanner.ScanToken(Int32 expected)
at System.Xml.XmlTextReader.SetElementValues()
at System.Xml.XmlTextReader.ParseElement()
at System.Xml.XmlTextReader.Read()
at System.Xml.XmlValidatingReader.ReadNoCollectTextToken()
at System.Xml.XmlValidatingReader.Read()
at System.Xml.XmlLoader.LoadCurrentNode()
at System.Xml.XmlLoader.LoadChildren(XmlNode parent)
at System.Xml.XmlLoader.LoadElementNode()
at System.Xml.XmlLoader.LoadCurrentNode()
at System.Xml.XmlLoader.LoadCurrentNode()
at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace)
at System.Xml.XmlDocument.Load(XmlReader reader)
at System.Xml.XmlDocument.Load(String filename)
at xd426863f4d052758.xcbcfc48b9705b7a2..ctor()
at xd426863f4d052758.xcbcfc48b9705b7a2.x479a7b07c9d5bd70()
at xcee8c863b4df05a0.x95481d250bcc5a4b.xbfc28f633fcdbd77(Object xdf2e3583f942db7b, EventArgs xc4f45905cb1fc7ba)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
----------------------------------------
GBPVRTray
Assembly Version: 1.0.2168.28053
Win32 Version: 1.0.2168.28053
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRTray.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
----------------------------------------
System
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
----------------------------------------
System.Drawing
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
----------------------------------------
GBPVRBackendCommon
Assembly Version: 1.0.2168.28048
Win32 Version: 1.0.2168.28048
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRBackendCommon.DLL
----------------------------------------
GBPVRPublic
Assembly Version: 1.0.2168.18584
Win32 Version: 1.0.2168.18584
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRPublic.DLL
----------------------------------------
System.Xml
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
----------------------------------------
System.ServiceProcess
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.serviceprocess/1.0.5000.0__b03f5f7f11d50a3a/system.serviceprocess.dll
----------------------------------------
************** JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.
at startup, other errors will pop up for other applications that use .net framework and sometimes for .net framework 1.1 itself. For some reason GBPVR MVP server is starting up with windows, even though it is not on the windows startup list or in the config.xml. Removing all GBPVR entries from startup stops any error at startup, but the MVP Server still starts.
I currently have .net 1.1, .net 1.1 hotfix, and .net 2.0 (a few of my programs require 2.0) installed on my system.
a bit of background, i had restarted the computer at some time yesterday. After doing so i've not installed anything or made any changes to the system. As a bit of my own troubleshooting i've uninstalled GBPVR, .net 1.1 hotfix, .net 1.1, as well as .net 2.0. I restarted and installed and restarted each one by one, GBPVR last. still noting. I've run antivirus scans (including an internet scan), spybot, adaware, rootkit revealer, registry mechanic, and scandisk. All turn up nothing (or false negatives). Within the last week, i've transfered my components into a new computer case. I've reseated all components and reconnected all cables to make sure nothing has shaken loose since then.
I run on Windows xp pro corporate service pack 2. I run on an AMD Athlon XP 2500+ 1.83 GHz, and 1.5 Gigs of RAM. There's no problems with any other programs. After everything i've done, there's still no change. Any ideas on what i could do?
I'm currently having one of those "This shouldn't be happening" problems. I used GBPVR last night just before going to bed and it was working perfectly. This morning i woke up, go to check GBPVR and neither the viewer or the config work.
i get this error when opening config:
config.exe - Common Language Runtime Debugging Services
Application has generated an exception that could not be handled.
Process id=0xb50928960, thread id=0x238 (568). - [numbers on this line change each time]
click OK to terminate the application.
click CANCEL to debug the application.
pressing cancel brings up:
Config.exe - No debugger found.
Registered JIT debugger is not available. An attempt to launch a JIT debugger with the following command resulted in an error code of 0x2 (2). Please check computer settings.
cordbg.exe !a 0xb50
Click Retry to have the process wait while attaching debugger manually.
Click cancel to abort the Jit debug request.
shouldn't this at least open with DrWatson?
i get this error when opening GBPVR:
GBPVR.exe - Common Language Runtime Debugging Services
Application generated an exception that could not be handled.
Process id=0xe34 (3636), Thread id=0xa0 (160).
Click OK to terminate the application.
Click CANCEL to debug the application.
pressing cancel brings up the same error window as config.
when starting the GBPVR tray process i get this error:
Microsoft .NET Framework
An unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. if you click Quit, the application will be shut down immediately.
There is an invalid character in the given encoding, Line 62 position 26.
Details:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Xml.XmlException: There is an invalid character in the given encoding. Line 62, position 26.
at System.Xml.XmlScanner.GetChars(Byte[] srcBuffer, Int32& srcOffset, Int32 srcLen, Char[] destBuffer, Int32 destOffset, Boolean zeroedOut)
at System.Xml.XmlScanner.Read()
at System.Xml.XmlScanner.ScanName()
at System.Xml.XmlScanner.ScanMarkup()
at System.Xml.XmlScanner.ScanToken(Int32 expected)
at System.Xml.XmlTextReader.SetElementValues()
at System.Xml.XmlTextReader.ParseElement()
at System.Xml.XmlTextReader.Read()
at System.Xml.XmlValidatingReader.ReadNoCollectTextToken()
at System.Xml.XmlValidatingReader.Read()
at System.Xml.XmlLoader.LoadCurrentNode()
at System.Xml.XmlLoader.LoadChildren(XmlNode parent)
at System.Xml.XmlLoader.LoadElementNode()
at System.Xml.XmlLoader.LoadCurrentNode()
at System.Xml.XmlLoader.LoadCurrentNode()
at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace)
at System.Xml.XmlDocument.Load(XmlReader reader)
at System.Xml.XmlDocument.Load(String filename)
at xd426863f4d052758.xcbcfc48b9705b7a2..ctor()
at xd426863f4d052758.xcbcfc48b9705b7a2.x479a7b07c9d5bd70()
at xcee8c863b4df05a0.x95481d250bcc5a4b.xbfc28f633fcdbd77(Object xdf2e3583f942db7b, EventArgs xc4f45905cb1fc7ba)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
----------------------------------------
GBPVRTray
Assembly Version: 1.0.2168.28053
Win32 Version: 1.0.2168.28053
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRTray.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
----------------------------------------
System
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
----------------------------------------
System.Drawing
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
----------------------------------------
GBPVRBackendCommon
Assembly Version: 1.0.2168.28048
Win32 Version: 1.0.2168.28048
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRBackendCommon.DLL
----------------------------------------
GBPVRPublic
Assembly Version: 1.0.2168.18584
Win32 Version: 1.0.2168.18584
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRPublic.DLL
----------------------------------------
System.Xml
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
----------------------------------------
System.ServiceProcess
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.serviceprocess/1.0.5000.0__b03f5f7f11d50a3a/system.serviceprocess.dll
----------------------------------------
************** JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.
at startup, other errors will pop up for other applications that use .net framework and sometimes for .net framework 1.1 itself. For some reason GBPVR MVP server is starting up with windows, even though it is not on the windows startup list or in the config.xml. Removing all GBPVR entries from startup stops any error at startup, but the MVP Server still starts.
I currently have .net 1.1, .net 1.1 hotfix, and .net 2.0 (a few of my programs require 2.0) installed on my system.
a bit of background, i had restarted the computer at some time yesterday. After doing so i've not installed anything or made any changes to the system. As a bit of my own troubleshooting i've uninstalled GBPVR, .net 1.1 hotfix, .net 1.1, as well as .net 2.0. I restarted and installed and restarted each one by one, GBPVR last. still noting. I've run antivirus scans (including an internet scan), spybot, adaware, rootkit revealer, registry mechanic, and scandisk. All turn up nothing (or false negatives). Within the last week, i've transfered my components into a new computer case. I've reseated all components and reconnected all cables to make sure nothing has shaken loose since then.
I run on Windows xp pro corporate service pack 2. I run on an AMD Athlon XP 2500+ 1.83 GHz, and 1.5 Gigs of RAM. There's no problems with any other programs. After everything i've done, there's still no change. Any ideas on what i could do?
