LivePreview exits after 30 seconds

[Kindred359]

GBPVR suddenly started kicking me out of LiveTVPreview after 30 seconds. I know other's have had this issue and I thought it was supposed to have been fixed in 96.8 - I'm on 96.12. I was wondering if anyone that had experienced this had overcome it, and if so, how? I know sub has his hands full right now (congrats again!).

My GBPVR.exe-native log is below. The part that seems funny is this:

18:17:35.343 INFO DirectShowPlayerBase::playLiveStream() done
18:17:35.343 VERBOSE put_Channel(36, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:18:05.546 VERBOSE ConexantRecorder::StopRecording()

The "StopRecording" happens exactly 30 seconds after the playLiveStream function is initially called. I tried running the re-registerfilters.bat file but that didn't fix it. However, restarting the recording service did. This frightens me, though, because when this happened before it failed to record my scheduled programs. I had never experienced this problem until upgrading to 96.8, and if there is no fix I may have to downgrade.

My GBPVR.exe-native.log

18:17:13.156 INFO Log started
18:17:13.156 VERBOSE getSetting(VMR9CustomAllocatorRenderer)
18:17:13.171 VERBOSE getSetting(ShowClosedCaptions)
18:17:13.171 VERBOSE getSetting(UseFFDSHOW)
18:17:13.171 VERBOSE getSetting(EnableTeleText)
18:17:13.171 VERBOSE getSetting(ForcedGraphTeardown)
18:17:13.171 VERBOSE getSetting(HorizontalZoom)
18:17:13.171 VERBOSE Horizontal Zoom: 1.050000
18:17:13.171 VERBOSE getSetting(VerticalZoom)
18:17:13.171 VERBOSE Vertical Zoom: 1.000000
18:17:13.171 VERBOSE getSetting(HorizontalOffset)
18:17:13.171 VERBOSE Horizontal Offset: 0
18:17:13.171 VERBOSE getSetting(VerticalOffset)
18:17:13.171 VERBOSE Vertical Offset: 0
18:17:13.171 VERBOSE getSetting(LiveTVPrePlayDelay)
18:17:13.171 VERBOSE getSetting(OSDTransparency)
18:17:13.171 VERBOSE getSetting(AspectRatio0)
18:17:13.187 VERBOSE getSetting(AspectRatio1)
18:17:13.187 VERBOSE getSetting(AspectRatio2)
18:17:13.187 VERBOSE getSetting(AspectRatio3)
18:17:13.187 VERBOSE getSetting(AspectRatio4)
18:17:13.187 VERBOSE getSetting(AspectRatio5)
18:17:13.187 VERBOSE getSetting(AspectRatio6)
18:17:13.187 VERBOSE getSetting(AspectRatio7)
18:17:13.187 VERBOSE getSetting(TeletextRect)
18:17:13.187 VERBOSE MinimumFilePlaySize=200000
18:17:13.250 VERBOSE DirectShowPlayerVMR9() initialising...
18:17:13.250 VERBOSE getSetting(OSDTransparency)
18:17:33.546 VERBOSE ConexantRecorder::StartRecording(1, 1, 36, 0)
18:17:33.546 VERBOSE target filename:
18:17:33.546 VERBOSE getSetting(DeinterlaceMethod)
18:17:33.546 VERBOSE Capture Device is based on BlackBird architecture
18:17:33.546 VERBOSE Capture Device is using Conexant (derived) drivers
18:17:33.546 VERBOSE Loading filter names
18:17:33.546 VERBOSE Found names:
18:17:33.546 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
18:17:33.546 VERBOSE Hauppauge WinTV PVR PCI II Capture
18:17:33.546 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
18:17:33.546 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
18:17:33.578 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
18:17:33.703 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
18:17:33.703 VERBOSE Looking for encoder filter
18:17:33.703 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
18:17:33.703 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
18:17:33.703 VERBOSE getSetting(AutoDetectEncoderMethod)
18:17:33.718 VERBOSE About try all encoders until we find one that works...
18:17:33.718 VERBOSE Hauppauge WinTV PVR PCI II Encoder
18:17:33.718 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
18:17:33.718 VERBOSE Pin mediums match...
18:17:33.718 VERBOSE using instance: 1
18:17:33.718 VERBOSE getSetting(PreferredAudioDecoder)
18:17:33.765 VERBOSE put_Mode(AMTUNER_MODE_TV)
18:17:33.765 VERBOSE put_CountryCode(1)
18:17:33.765 VERBOSE put_TuningSpace(1)
18:17:33.765 VERBOSE put_InputType(0, 0)
18:17:33.765 VERBOSE put_ConnectInput(0)
18:17:33.765 VERBOSE put_Channel(36, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:17:34.031 VERBOSE get_VideoFrequency() returns 295375000
18:17:34.031 VERBOSE get_CountryCode() returns 1
18:17:34.031 VERBOSE About to query available formats
18:17:34.031 VERBOSE ConexantRecorder::SetConfigurationECP()
18:17:34.031 INFO Firmware Version 2.5.32



Audio Firmware Version <<can't read now>>



Model 26052 Rev C199

Serial No: 8149357

Tuner[1]: Model 99 (TCL 2002N_5H)

Decoder: 30

AudioIC: 37

IR



Input Map: C= 0x000f, S= 0x0003


18:17:34.062 VERBOSE getSetting(EnableTeleText)
18:17:34.062 VERBOSE getSetting(ListGraphFilters)
18:17:34.062 VERBOSE Graph contains the following filters:
18:17:34.062 VERBOSE - MPEG-2 Demultiplexer
18:17:34.062 VERBOSE - Encoder
18:17:34.062 VERBOSE - Capture
18:17:34.062 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
18:17:34.062 VERBOSE - TV Audio
18:17:34.062 VERBOSE - TV Tuner
18:17:34.062 VERBOSE getSetting(SaveGraphFiles)
18:17:34.156 VERBOSE ConexantRecorder::StartRecording() done
18:17:34.156 INFO DirectShowPlayerBase::playLiveStream(pGB, 'MPEG-2 Demultiplexer', 'Video Pin', 'MPEG-2 Demultiplexer', 'Audio Pin', hwnd)
18:17:34.218 VERBOSE getSetting(VMRWindowedMode)
18:17:34.218 VERBOSE getSetting(PreferredAudioRenderer)
18:17:34.218 VERBOSE getSetting(PreferredDecoder)
18:17:34.250 VERBOSE video decoder filter: InterVideo NonCSS Video Decoder for Hauppauge
18:17:34.250 VERBOSE getSetting(PreferredAudioDecoder)
18:17:34.250 VERBOSE getSetting(DeinterlaceMethod)
18:17:34.281 VERBOSE FindFilterByName failed to locate filter: Encoder pass-through
18:17:34.500 VERBOSE getSetting(ListGraphFilters)
18:17:34.500 VERBOSE Graph contains the following filters:
18:17:34.500 VERBOSE - Default DirectSound Device
18:17:34.500 VERBOSE - Video Renderer
18:17:34.500 VERBOSE - MPEG Audio Decoder
18:17:34.500 VERBOSE - InterVideo NonCSS Video Decoder for Hauppauge
18:17:34.500 VERBOSE - MPEG-2 Demultiplexer
18:17:34.500 VERBOSE - Encoder
18:17:34.500 VERBOSE - Capture
18:17:34.500 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
18:17:34.500 VERBOSE - TV Audio
18:17:34.500 VERBOSE - TV Tuner
18:17:34.500 VERBOSE getSetting(SaveGraphFiles)
18:17:35.343 INFO DirectShowPlayerBase::playLiveStream() done
18:17:35.343 VERBOSE put_Channel(36, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:18:05.546 VERBOSE ConexantRecorder::StopRecording()

[sub]

Can you zip and attach a set of logs so I can see what else is happening at the same time?

[Kindred359]

Wow - I can't believe I neglected to grab the logs and post them - stupid. I'll grab and post them as soon as I can reproduce it. Restarting the recording service seemed to clear it up for the time being.

[Kindred359]

Okay, the logs are attached. I've attached two sets of logs. Last night I restarted the recording service and livetv was fine, and this morning livetv is booting me out again. The first set of logs is the logs from last night to this morning. The second set of logs (gbpvr_short) is the logs after restarting just gbpvr this morning, going into live tv, getting booted after 30 seconds, and exiting gbpvr. I've also now changed my logging level to DEBUG so if it happens again I'll grab the new logs as well.

[sub]

I've also now changed my logging level to DEBUG so if it happens again I'll grab the new logs as well.

Yeah, I'll wait for those. I cant tell you anything when the logs are set to ERROR level.

[#66]

Strange, all was working fine. During the night the remote will stop working and I have to exit with mouse. Start GB up again and I get thrown out of live tv after 30 secs. Have to reboot to fix.

Also how does one stop the remote.ini file from been overwritten? I save the file wth the volume fix and pictures mapped to F7. Will work for som time then stop working. Go into the file and pictures is back to F5 an 2 new volume+- entries that overide the fix.

Thanx

[Kindred359]

Okay - logs with level set to DEBUG. The first is with GBPVR running for a day and LiveTV working fine for a while. The last thing I did was go to LiveTV, get kicked out after 30 seconds, and exit GBPVR. The second set is from restarting GBPVR, going to LiveTV, getting kicked out after 30, and exiting. Restarting the recording service fixes it (for a while). Thanks.

[sub]

can you zip and email your gbpvr.mdb to me at support@devnz.com?

[Kindred359]

Sub,

I zipped and sent the requested file. Thank you.

[Kindred359]

#66 - out of curiousity what version of GBPVR are you running. Is anyone else experiencing this symptom?