GB-PVR errors immediately after installation/config

[skoodog]

My gear:

Athlon T-bird 1.4Ghz o/ced to 2200
512 RAM
Hauppauge PVR-150 WinTV

Immediately after installing this software (after installing all prior software, DirectX, .NET, etc.), I get the following error:

---------------------------

---------------------------
Error loading plugin list: System.ArgumentException: Invalid ConnectionString format for parameter "Password"

at System.Data.SQLite.SQLiteConnection.ParseConnectionString()

at System.Data.SQLite.SQLiteConnection.Open()

at GBPVR.Backend.Common.xcbcfc48b9705b7a2.xa19cc1d2df8cbd74()

at GBPVR.Backend.Common.x1d248470894f26c1.xec273cb62c940b66()

at Config.xfd6951461fe46d87.x81464aef82823e23()
---------------------------
OK
---------------------------

I continue through this error, since I am able to. I follow the instructions to set up my card, then click OK to close the config and get this error:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values.
Parameter name: index
at System.Windows.Forms.TreeNodeCollection.get_Item(Int32 index)
at Config.xfd6951461fe46d87.x67fcbfe7ceaef388()
at Config.xfd6951461fe46d87.xd1bc48f5dba57993(Object xdf2e3583f942db7b, EventArgs xc4f45905cb1fc7ba)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Config
Assembly Version: 1.0.2445.27654
Win32 Version: 1.0.2445.27654
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/Config.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
GBPVRBackendCommon
Assembly Version: 1.0.2445.14608
Win32 Version: 1.0.2445.14608
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRBackendCommon.DLL
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.ServiceProcess
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
GBPVRPublic
Assembly Version: 1.0.2443.18621
Win32 Version: 1.0.2443.18621
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/GBPVRPublic.DLL
----------------------------------------
System.Data.SQLite
Assembly Version: 1.0.30.1
Win32 Version: 1.0.30.1
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/System.Data.SQLite.DLL
----------------------------------------
NativeUtilities
Assembly Version: 1.0.2443.18653
Win32 Version:
CodeBase: file:///C:/Program%20Files/devnz/gbpvr/NativeUtilities.DLL
----------------------------------------
msvcm80
Assembly Version: 8.0.50608.0
Win32 Version: 8.00.50727.42
CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd/msvcm80.dll
----------------------------------------
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.


I am unable to continue past this and it does not save my information. HELP!!:mad:

[sub]

A couple of other users got this also when they'd upgraded from early versions (skipping the previous v0.97 releases). Does also apply to you?

[skoodog]

Yes. I had failed to uninstall the prior version beforehand.

However afterward, I have done several fresh installs to no avail - I get the same errors. Must be some latent key in the registry tripping it up. I'm not a techie though so I don't know the first thing to do about it.

I wish I knew the v. I had before as a reference, but alas, I don't. It's been well over a year, though. Had been just using the fugly software that came w/ my Hauppauge but w/ a new room configuration wanted to set it up again.

[sub]

If you set the following settings in config.xml, it might start working.

Code:

<DatabaseConnectionString>Provider=Microsoft.Jet.OLEDB.4.0;Data Source=".\gbpvr.mdb";User Id=admin;Password=</DatabaseConnectionString>
  <DatabaseProviderFactory>System.Data.OleDb.OleDbFactory</DatabaseProviderFactory>
  <DatabaseIdentityQuery>select @@identity</DatabaseIdentityQuery>

[skoodog]

You're a genius. That did it! Thanks. I'll let you know if I find any other issues henceforth.

[skoodog]

Ok, error time again - this time when updating the EPG...I logged in through Zap2it, signed up with the appropriate codes and everything, but then got the error at the bottom of the page. I do have all ports open to this computer so there shouldn't be anything blocking the connection:

---------------------------

---------------------------
Your EPG source does not appear to be configured correctly. Please check the EPG Source Settings and try again. System.Net.WebException: The remote server returned an error: (401) Unauthorized.

at System.Net.WebClient.UploadDataInternal(Uri address, String method, Byte[] data, WebRequest& request)

at System.Net.WebClient.UploadData(Uri address, String method, Byte[] data)

at System.Net.WebClient.UploadData(String address, String method, Byte[] data)

at GBPVR.Backend.Common.Zap2itEpgReader.x7174d5399cba81ee(IEpgUpdateProgressCallback x421ce789b9741187, DateTime xdc88f59e43b65f7f, DateTime x33db96d2cea26583)

at GBPVR.Backend.Common.Zap2itEpgReader.LoadChannels(IEpgUpdateProgressCallback callback)

at GBPVR.Backend.Common.xbdfb880686f2538b.x52e8ddd0b9bc8c68(xda34526142ca690b x347261624b519e9a, IEpgUpdateProgressCallback x421ce789b9741187)

at Config.xca74b9c9b310df0b.xcba1f05fb5a46d5f()
---------------------------
OK
---------------------------

[skoodog]

Ok, error time again - this time when updating the EPG...I logged in through Zap2it, signed up with the appropriate codes and everything, but then got the error at the bottom of the page. I do have all ports open to this computer so there shouldn't be anything blocking the connection:

---------------------------

---------------------------
Your EPG source does not appear to be configured correctly. Please check the EPG Source Settings and try again. System.Net.WebException: The remote server returned an error: (401) Unauthorized.

at System.Net.WebClient.UploadDataInternal(Uri address, String method, Byte[] data, WebRequest& request)

at System.Net.WebClient.UploadData(Uri address, String method, Byte[] data)

at System.Net.WebClient.UploadData(String address, String method, Byte[] data)

at GBPVR.Backend.Common.Zap2itEpgReader.x7174d5399cba81ee(IEpgUpdateProgressCallback x421ce789b9741187, DateTime xdc88f59e43b65f7f, DateTime x33db96d2cea26583)

at GBPVR.Backend.Common.Zap2itEpgReader.LoadChannels(IEpgUpdateProgressCallback callback)

at GBPVR.Backend.Common.xbdfb880686f2538b.x52e8ddd0b9bc8c68(xda34526142ca690b x347261624b519e9a, IEpgUpdateProgressCallback x421ce789b9741187)

at Config.xca74b9c9b310df0b.xcba1f05fb5a46d5f()
---------------------------
OK
---------------------------

[sub]

(401) Unauthorized.

Sounds like you've got your zap2it username/password wrong, or your account has expired.

[skoodog]

Apparently, it takes them about an hour to send new accounts to their servers. Odd.

Now - as I've already posted in another post - I have an error with it telling me "object reference not set to an instance of an object" whenever I try to watch Live TV, click on a listing in the TV Guide, or try to watch a video from my video library.

[sub]

Post the logs and I'll take a look.