2005-02-16, 03:20 AM
okay for those who have the program tsreader..
I got it working reasonably well with gb pvr so for those who wish to try here you go.. it not perfect but works well.. I can get every thing on the dvb s t and c supported by tsreader
what you will need:
tsreader 2.5.41
vlc
gb-pvr
configure your gbpvtr capture source.. you will have to do so for each transponder
for recording source ;
I used g0700... source because I do not have it. on my computer you can use what ever you want.. we will do it this way untill perhaps later there will be a "simple capture source"
epg source:
use xmltv guide and download the four or nine day guide with tsreader. update and uncheck the channels that do not belong to that transponder. channel the channel number to equal thr proper channel number for those channels..
channel changer:
use .exe changer pluggin configure
set your tsreader path and use this in the param
-i -v {channel} 2 12224 R 20000 11250 0
-i allows only one instance of tsreader
-v statss up vlc
2 is the configuation file for vlc mine looks like this
<IP>
out=#duplicate{dst=std{access=file,mux=ps,url="C:\`buffer.mpg"}}
it converts the file to Ps mpeg and writes it to the drive
12224: is the freq
R: is the polaration
20000; is the symbol rate
11250: is the lnb settings
0: wherer or not there is 2tone
the the last not shown would be for the disqec
now your done and you can watch tv.
now simple select the channel tsreader will run hidden but as soon as you see vlc pop up, about 20 seconds you can select the file `buffer.mpg and watch tv
to change the channel just go back to the guide choose another channel it will shutdow tsreader and vlc automaticaly and tune to the new channel and you ready to watch again..
I got it working reasonably well with gb pvr so for those who wish to try here you go.. it not perfect but works well.. I can get every thing on the dvb s t and c supported by tsreader
what you will need:
tsreader 2.5.41
vlc
gb-pvr
configure your gbpvtr capture source.. you will have to do so for each transponder
for recording source ;
I used g0700... source because I do not have it. on my computer you can use what ever you want.. we will do it this way untill perhaps later there will be a "simple capture source"
epg source:
use xmltv guide and download the four or nine day guide with tsreader. update and uncheck the channels that do not belong to that transponder. channel the channel number to equal thr proper channel number for those channels..
channel changer:
use .exe changer pluggin configure
set your tsreader path and use this in the param
-i -v {channel} 2 12224 R 20000 11250 0
-i allows only one instance of tsreader
-v statss up vlc
2 is the configuation file for vlc mine looks like this
<IP>
out=#duplicate{dst=std{access=file,mux=ps,url="C:\`buffer.mpg"}}it converts the file to Ps mpeg and writes it to the drive
12224: is the freq
R: is the polaration
20000; is the symbol rate
11250: is the lnb settings
0: wherer or not there is 2tone
the the last not shown would be for the disqec
now your done and you can watch tv.
now simple select the channel tsreader will run hidden but as soon as you see vlc pop up, about 20 seconds you can select the file `buffer.mpg and watch tv
to change the channel just go back to the guide choose another channel it will shutdow tsreader and vlc automaticaly and tune to the new channel and you ready to watch again..