hauppauge-2250 cant find channels

[glitchgod]

To start with this is a first for me and is a new thing for me.

I have the card connected to a splitter since I believe you need both inputs to be connect in order to record? Both as i said go to a source that is connected via embeded into the wall. I did a test and hooked this cable to my TV directly and their was signal so their is something up with the CARD or the Cable.

I did run the driver installer.

I have NextPVR installed and have directx installed along with. I go to devices and I see 4 devices
ATSC Hauppauge WinTV-7164 BDA ATSC/QAM Tuner
QAM Hauppauge WinTV-7164 BDA ATSC/QAM Tuner
ATSC Hauppauge WinTV-7164 BDA ATSC/QAM Tuner(2)
QAM Hauppauge WinTV-7164 BDA ATSC/QAM Tuner(2)

I have time warner cable and wish to watch live tv and all that nice stuff. So I click on each one, one after another and tell it to scan All Frequencies (some have this options list 2-3 times) and nothing ever shows up even after waiting 15 mins.

I did a bit of research and I have the Firewall 100% turned off so im kinda lost as to why nothing is being listed.

any help.

[mikeh49]

You can ignore the ATSC tuner(s) as they are for over the air/antenna TV and you have cable. There are 2 entries for each type of tuner since your card has 2 tuners and each appear separately. If you can connect your TV to the wall and get channels with pictures and sound, you need to determine whether you have analog or digital signals coming from the wall outlet. If you did not have scan for channels on the TV, you have analog. The TV should have something telling you whether it is an analog or digital channel. If it is analog, then you will need to install some additional software to get the analog part of NPVR working. The easiest way is to install the WinTV program that came with your tuner. It will install the necessary components. You don't need to use it as it will coexist with NPVR. You can use it to confirm that the tuner is working and you are seeing some channels.

When you get to this point and see an analog tuner in the Devices, then come back here and get some advice on a EPG, which is really needed to work well with NPVR.