Hi,
I have had a PCH working successfully for some time now, but having got a new router I was forced to change the ip address range I was using. Since then I have failed to get the PCH working again. I have changed the address in the settings on the box. The box gets as far as the press enter to stop loading NPVR screen but never loads.

Am I right in thinking that to get this screen means that the PCH is communicating with the media server correctly, if so I don't understand why it now does not load NPVR. Is there another reference to the old ip addresses somewhere I have forgotten that needs changing.

Must be something obvious it is only a couple of ip addresses that changed,

Thanks for any help

Is there a control for subtitle size and color? I've looked through other posts and haven't found anything on this topic. I'm asking because a film I watched on my server NPVR had different color and size subtitles than it did when watched on the client NPVR.

My laptop client is not able to watch live tv for more than 5 minutes, then it freezes. Any suggestions?

NPVR stutters (audio and video) when I mouse-over NPVR on the PC.

It does not happen when I move the mouse OFF the NPVR screen.
It does not happen with NPVR on the Popcornhour (no mouse... :-) )

Not new to 329 but just got a wee bit tired of it happening.

Video Card drivers maybe?

k.

After a fresh install of 3.2.9, I immediately go to the TV Guide screen and try to "watch" a show.
Get "an existing connection was forcibly closed by the remote host" error, and have to stop the app to get things cleared up.
I'm using 2 DCR-2650's.

Some time back Sub gave me a patch (ForcedIP.XML) to get these tuners working.
Don't know if this has anything to do with that.
Log is attached.

Also, I keep seeing a new device (IPTV) in my settings.
Don't know why it's there.
Tried deleting it but it keeps coming back

Hi,
I was someone could please help me configure NextPVR? This is my first time using it (I'm trying to break away from WMC).

I live in Brisbane, Australia. I have a Windows 8.1 HTPC, with a VideoMate E900F dual tv tuner card (it's listed as a "7164 BDA DVBT Tuner") in NextPVR's Devices screen.

Scans only pick up 14 of the, roughly, 30 digital channels. Set top boxes using the same antenna pick up all channels.
I think WMC picks up a few more channels than NextPVR. WMC doesn't pick up ALL channels.

The channels I do get seem to be working fine ie codecs are ok etc.

The two main channel groups I don't get are SBS and Nine. Research indicates this is a common problem for this TV card. Some people have had luck manually adding channels.


So... my questions;

1. Where do I find the nextpvr.log file? I'd like to attach it
2. Given this information;

SBS ONE(SBS):184500000:INVERSION_AUTO:BANDWIDTH_7_MHZ

What would the import channel XML look like? Is that the best way to go about adding a channel manually?

thanks

I just updated to the latest version. I like the new meta data for the recordings. It is nice to see the actual cover image for a show and a synopsis about the episode as you scroll past it. However, I only seem to be able to see a list of recorded titles for a show in its directory, and nothing else about the recordings. I used to be able to see the the name of the show and the date it was recorded. I can see the date of the last recording for a given show on the folder for that show, but no such data for each recorded instance of a show within that folder. Is there a setting that I am missing for this?

thanks,

AT

I decided to switch to NextPVR, but after I scanned channels for my QAM tuner and my ATSC tuner I found that I was missing about 20 channels. I tried disabling the firewall before scanning, but still missing channels. :confused:

My TV tuner is a WinTV-950q.
I'm using NPVR v3.2.9
TV is from a digital source.

Here is my NPVR.log

Hi There,

Just wondering if these have changed? Previously I could use a number of Ctrl keys for shortcutting certain things for example Ctrl-B was the Info button. Now this does not seem to work, which is kinda frustrating as I use LMRemote to program my remote and it can no longer control a number of things.

Is this an issue with my box? Or is this functionality that may have recently changed?

Can I re-introduce any of this into KeyMappings.XML?

Trevor

Getting an "unhandled exception" error (instead of the "conflict" screen) when trying to schedule a recording when a tuner is unavailable.
(actually, I found if I "continue" thru the error I do get the conflict screen)

error message "Object reference not set to an instance of an object"

If I use the standard TV Guide I don't see the problem.

I have attached the error.log.