Thanks again for this, it has worked pretty well so far.
There are times (not a Roku App issue) where the Comskip blanks get out of sync with the commercials. This may be due to more tuning needed in comskip, antenna issues, etc.
When running NextPVR on the PC, I simply bypass Comskip by pressing "999", and then manually fast forward through commercials.
When running in Roku, I have not found a way to turn off the Comskip blanks when they get out of sync.
Is there any way we can get the equivalent of "999" on a Roku button sequence or long-push? I recognize it is a very limited remote. In our new setup, new location, antenna vs cable, etc., we are having many issues that I am still resolving. But even when all is right, Comskip is not perfect, as the networks doe what they can to get you to watch commercials!
I am new to this forum and am trying to setup and evaluate the NextPVR software. I can view live and recorded TV okay on the Web App, however I’m having problems with the Desktop App. When trying to view live or recorded TV with the Desktop App, the picture is black with the occasional fleeting flashes of the picture when I right click on the window, the sound is very sporadic and broken.
I have installed NextPVR on a HP EliteDesk 800 G1, Intel Core i5-4670 3.40GHz computer with a clean fresh install of Windows 10 Pro. Before installing NextPVR, I stalled LAV Filters v0.77.1 (LAV Audio x86 & LAV Video x86). After installing NextPVR, I did a channel scan and uploaded EPG Guide. I then went into the Desktop App and set all Video and Audio Decoders to LAV. All other NextPVR settings are at the default state. I am using a Hauppauge WinTV-quadHD (model 1607) tuner card. I have reinstalled Windows and NextPVR twice with the same result.
I assume I have a decoder problem, I have scanned through the forum for ideas but haven’t found any. I believe I have setup NextPVR correctly according to the Wiki guide and am out of ideas. I have attached logs which I saved immediately after trying to view live TV on the Desktop App. I would greatly appreciate any assistance you can give me.
Most stations are transmitting DD encoded sound in my area. I can verify this by viewing the signals directly on my LG TV connected directly on the antenna and seeing the DD logo on the channel info. My audio receiver also automatically enters the digital Dolby mode when audio is streamed to it by the optical tv output.
On the other hand I also have a Hauppauge dual HD atsc 1.0 tuner stick attached to a PC running Windows 10 and nextpvr. It in turn is attached to the same tv using an HDMI cable on hdmi1. The Hauppauge specs say the device outputs AC3 sound which I understand is digital dolby... So I am expecting the audio receiver to pick this up and enter digital Dolby mode... Instead I get stereo audio.
What am I misunderstanding? Or missing? Hints appreciated. I loaded the Hauppauge "drivers only" package for the tuner stick and am using the latest Windows version of nextpvr.
Should I abandon this if it's easier and switch to a silicon dust 4k tuner, as my receiver can also decode Dolby Atmos? There are at least 4 atsc3 channels nearby which is not a lot to justify the extra expense when I get 40 atsc 1 channels.
Thanks for any advice to set me straight on the sound out of the Hauppauge stick.
I am using a Hauppauge WinTV-dualHD on a Kubuntu 22.04 machine. I installed with the debian package and software appears to run smooth. At least right to that moment, where I want to scan for channels. I am using the ch-Bern-upc-cablecom setting, which should match. The values in the file correspond to the values given by UPC. I can click "Scan Channels" and I get a few service channels, but I do not get any of the TV stations. The log shows the lines included at the end.
The sameWinTV stick on a Windows machine does find all channels, unfortunately leaving it there is not a solution, and I understood that the files are not compatible. Is there something I can do to make NextPVR search thorougher?
2023-02-20 21:27:11:437 [DEBUG] Scanning from /usr/share/dvb/dvb-c/ch-Bern-upc-cablecom
2023-02-20 21:27:11:437 [DEBUG] Channel config will be saved to /var/opt/nextpvr/adapter0-DVB-C-channels-scan.conf
2023-02-20 21:27:11:775 [DEBUG] >>> Scanning@next
2023-02-20 21:27:11:775 [DEBUG] >>> Scanning 426000000
2023-02-20 21:27:16:093 [DEBUG] ~1~Welcome~sunrise~1~426000000OFF
2023-02-20 21:27:16:093 [DEBUG] ~698~698 Test~sunrise~1~426000000OFF (encrypted)
2023-02-20 21:27:16:093 [DEBUG] ~5010~D4A Code download~sunrise~12~426000000OFF
2023-02-20 21:27:16:093 [DEBUG] ~5020~Converter DL~sunrise~12~426000000OFF
2023-02-20 21:27:16:093 [DEBUG] ~5030~Standby App~sunrise~1~426000000OFF
2023-02-20 21:27:16:093 [DEBUG] >>> Scanning@about to store
2023-02-20 21:27:16:093 [DEBUG] >>> Scanning@about to free loop
2023-02-20 21:27:16:093 [DEBUG] >>> Scanning@about to start next loop (00000000)
Some, but not all, of my IPTV channels give the following error when trying to record; "The filename, directory name, or volume label syntax is incorrect : R:\Tournament of" (that's all the text I see as part of the error description)
The same show/channel will play fine if I just want to watch it.
The filename after the "R:\" changes, depending on the name of the recording. "R" is the label on my recording drive.
The folder "Tournament of Champions" is created, as well as the subdirectory "Season 2", but no file is recorded.
i recognise an EPG update problem at a friend of mine, who uses nextpvr via DVB-S in germany.
Following situation:
Some stations have EPG for a long time in the future (14 days). The current few days are filled with detailed information, from day 6 - 14 only basic inforamtion is provided.
Now to the problem:
NPVR does an EPG scan every night (default), but it does not update the additional information that is added to the show as the time comes closer. This problem always exists. So on these channels, you only have basic info, because detailed info is never loaded via update.
If i delete the EPG info, and do a rescan, all EPG detail is visibible. Then it takes a few days -> same problem again, bacause the original basic info (only title) is not updated with the detail information.
It would be very nice, if this could be fixed in the future, so that if detailed infos gets available, if it broadcasted.
Hi all, I jumped through a lot of forums, but putting it all together came up with one solution to using npvr on windows 11 with NO DEVICES showing up while trying to setup npvr. I had reinstalled npvr multiple times with no luck. Then I read about a user in Australia having the same trouble. Well, it seems that the best way to get results expected, is to TOTALLY uninstall the hdhr software, then install it again from the SiliconDust site. Do NOT use the app from the Windows Store. Once I did that, ran npvr setup again and THEN under the Devices tab in npvr, all my hdhr tuners showed up, and was able to complete the setup successfully. Hope this helps someone that gets stuck. Thanks for reading.
New install here, on an HP EliteDesk800 (i5-6500T), and nextPVR is functioning, but I'm seeing some strange behavior during playback with the pc-based client.
- Sometimes skipping either by clicking on the progress bar or on the >> key works as expected. Other times, the playback will pause for as long as 30 seconds before resuming.
- While watching in a small window, playback behaves properly. But if I stretch the window to either most of the screen or select full-screen, I see pretty severe pixelation, freezing, and tearing. I updated to the latest Intel video drivers, but no change.
I've attached a log file, though it will show lots of mixed activities as I troubleshot. I can provide a more concise log showing the problem events if needed.
