Following a scan I get a wodge of channels some of which say Audio #2. In the past I never selected these channels as all you got was a bloke talking to you.
With the new version the scan doesn’t seem to be quite right and I will get channels that don’t have audio #2 selected but when you play them you get no sound. And conversely I get a channel that says audio #2 but the sounds works perfectly.
The problem is it seems to be no pattern to it. I am know effectively having to turn by one channel at a time. Has anyone else had this problem?
There is more to this than meets the eye. When I select the channel when Digital Channel Mapping the sounds plays perfectly. It only when playing life TV it doesn't work.
There is even more to this than meets the eye. I got all my channels working BBC 1, BBC 2 by adding them one at a time. I then restarted the computer and now they show up in edit recoding source as BBC 1 under tuning request they now show up as BBC 1 (Audio #2) before the reboot this wasn't the case
My GeForce 7300LE just can't seem to smoothly playback 1080i USA clear QAM HD content in Windows XP. I've tried every mix of decoders/mux/renderer/drivers/settings possible.
Can anyone using **Windows XP** with US HD ATSC/QAM recordings give me a recommendation on a video card to give smooth DXVA playback of content?
Just wondering can anyone recommend a net-top computer for use with GBPVR? My current setup is uses 2x USB Hauppage tuners, and frequently plays back 720p H264 videos (I'm guessing a familiar setup).
Any suggestions? I'm looking something reasonably priced as opposed to high end.
I have been wanting to use GBPVR FOREVER!! I just now have the time and resources to make it happen. I found a good deal on a computer that I think will work for what i need. will the following specs run gbpvr?
* CPU : Via C3 1.0GHz (Motherboard is a Via EPIA-M)
* Memory Total : 256MB PC2100 DDR SDRAM
* HD : 40GB IDE
* Optical Drive : 8x DVD±RW Dual Layer DVD Burner (There is no floppy drive)
* Network : Onboard integrated 10/100Base-TX Fast Ethernet
* Dimensions: Case size - 15 x 12 x 4 (inches)
* Power Supply : 220W AC - This can switch between 120v-220v input
* Video : Onboard integrated VIA UniChrome AGP graphics with MPEG-2 decoding acceleration and 32MB shared video memory
* Ports : Four (4) USB, One (1) Firewire, One (1) Serial, One (1) Parallel, One (1) HD-15 VGA, One (1) RCA Video-Out, One (1) S-Video, One (1) IrDA and Two (2) PS/2
* Form Factor : Mini-ITX Desktop
* Audio : Onboard integrated VIA VT1616 6-Channel AC-97 codec
* TV Tuner Card : TVision TVF-7531MF PCI with Coax(TV-In), S-Video, RCA Video-In, Audio-In/Out and Remote
* Memory Config : 1x256MB
* Keyboard : IR Keyboard with integrated Mouse
* Model Number : VIA EPIA-M
* Condition : New in Sealed Box (NIB) and sold with warranty
I am going to upgrade the RAM and the HDD, so no worries there
Just a few things i worry about.
1. Is the processor fast enough? It is embedded so I cant upgrade
2. Will the graphics be enough?
3. Will this tuner work with GBPVR?
If it wont, I have a question about the pvr-500. I have standard cable, bo cable box, no hdtv or digital cable, just a cable running into the tv from the wall. will this tuner work? wont any tuner work? Thanks!! I would like a quick answer as this deal wont last long.
Hello,
just tried to install showsearch on 1.4.7 for the first time.
i cannot see it on the plugin tab of config or in the slick pvrx2 menu. is there something else i need to do to get this working?
I've tested loading my offline DVD library inventory into MovieWiz, e.g.:
Alien
Aliens
Torchwood - Season 1
Torchwood - Season 2
True Blood - Season 1
but there doesn't appear to be anyway to search this list via GBPVR.
I'd like to be able to search these titles to determine which seasons
I have, for example:
Torchwood ==> show all titles with "Torchwood"
Season 1 ==> show all titles with "Season 1"
Am I missing something? I also have SearchWiz installed but it
seems to only search recordings.
I can not get audio from most DivX files I have imported in GBPVR (video is fine...loads the DivX codec and plays, just no audio). I do have a couple of DivX files I have imported that work with audio...'can not tell what makes the difference, but these are the exception rather than the rule. The files that are not working in GBPVR play fine with audio in VLC Media player and with the DivX player that installed when I downloaded the DivX codec. I tried downloading the latest DivX installation file and reinstalling…no help. Any ideas what I need to do to get audio when I play these with GBPVR? I've also tried setting all the advanced codec settings to DivX decoders in the GBPVR playback configuration. I'm using GBPVR version 1.4.7 and DivX 7 (free version). I've attached my logs and my config.xml files in case they help.
All of a sudden I am not getting any sound from GBPVR. I can play anything in VLC and WMP and everything works fine, but no sound from recorded shows or live tv in GBPVR. I've looked through the logs and can't find anything that indicates why. If someone else can spot something I'm missing I would appreciate the help.
I have a new nettop computer with dual core atoms and Nvidia ION (Geforce 9400M) that I run as a gbpvr client with Win7 x64. Everything works perfectly except I get no sound on Live TV and recordings. I notice that I do get sound on older mpeg recordings, but nowdays I use ts mux. I have other client installations on XP which works fine.
When mounting the gbpvr server shares and playing the ts files outside gbpvr in wmp I have no problems at all. I have also tried every possible and impossible combination of audio decoders and renderers, but no luck.
I'll attach the logs...
EDIT: replaced logs with debug setting on. Previous was info only.
I set up one of my remote's buttons to start pvrx2 but if pvrx2 was already running it would create a new process and then switch me to the old process. I ended up with alot of pvrx2 processes if I kept hitting the button. Here's a little script that will check to see if pvrx2 is running and if it is activate it, a.k.a. bring it to the forefront. If it's not running, it will start it.
Code:
strComputer = "."
strProgramName = "PVRX2.exe"
strProgramTitle = "PVRX2"
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set objShell = CreateObject("WScript.Shell")
Set colProcessList = objWMIService.ExecQuery _
("Select * from Win32_Process Where Name = '" & strProgramName & "'")
If colProcessList.Count > 0 Then
objShell.appactivate strProgramTitle
Else
objShell.Run strProgramName
End If
Not very complex. Save it to a file with a vbs extension and put it in the same directory as PVRX2.
