Hi,

Just wondering does anyone have a solution to this problem.

When I'm watching a live DVB-T programme on a client (office PC) frequently enough the client will crash. I'm putting this down to a corrupt signal, but I'm not sure. When I restart the client, it leaves the original tuner on the server 'locked' and opens a new one for the second session. The tuner only becomes available again when I restart the server recording service.

Is there a solution to this problem? Could it be possible in future for the server to require a "still alive" signal from the client otherwise it will release the tuner (after, say, 30 seconds)?

Thanks

Hi all. Just sorta impulse purchased a second HVR-1600. Whats the best way to install it? Do I just plug it in and turn the computer on? Will windows realize that it already has drivers for it? Or will I need to monkey around with drivers/winTV or anything??

I'm guessing that configuring GBPVR to use both HVR-1600's will be a piece of cake - it's getting windows to recognize them both thats worrying me...

Does anyone have one of these?

I'm having a few issues with this- quite often, it will fail to find a signal, after scolling around the channels for a while, it will suddenly pick up and work fine. I have a funny feeling that it seems to get stuck on Horizontal vs Vertical polarisation.

In addition, I don't seem to be able to get Diseqc switching to work. I might post some logs if fiddling doesn't work- I also think I need to relax the BDA settings to give the hardware time to work, but I don't know which to change. There used to be a bda_timeout option which could be used to slow things down for slower USB hardware, but this doesn't seem to be in the config.xml any more.

Any help greatfully received- I was forced into USB hardware because I have no space left in my Shuttle.

Daniel

If it's possible to recommend an AGP card at this point in time - what would be a good one for playing streaming HD video from my HDHomeRun or my STB (via Firewire)?

I can connect to my display (32" 720p LCD) via VGA, DVI or HDMI so the connectors on the back really aren't an issue, I have some flexibility there. However it needs to take up only one slot, height-wise, as I am working with a mATX enclosure - which also makes heat somewhat an issue as the enclosure is pretty tight but ventilated adequately.

Was looking at the Sapphire Radeon HD 3850 from Newegg, would be open to other recommendations.

Given that with about $300 I could probably do a better full-system upgrade (with PCI Express) maybe I should be looking at that? Current spec is a Sempron 2600+, 1.5 GB PC3200, FX5200 AGP card.

I have an HVR-2250 and I’m running 1.13.11 with all of the patches applied. I’m recording ATSC and use DVR-MS. I also have Comskip installed. When I watch a recorded show, the video plays back normally but the timeline is messed up. When the video hits the first commercial, the OSD indicator hasn’t reached the marked commercial. Hitting “skip fwd” actually causes the video to skip backwards to the position shown by the OSD, after which skipping forward works properly.

I’ve tried several different versions of the Hauppauge drivers and I’m currently using the 27091 beta.

The log folder is attached.

Thanks,
pete

Since a couple of weeks I am having problems with skipping. This is only a problem on the MVP, it seems okay on the pc.

When skipping forward and back the position of the video is not correct.
For example when skipping forward 1 minute forward and backward 1 minute I am not on the same position in the video.

Probably the only thing I changed on my pc about the time this problem started, was a game (racedriver grid). Unfortunately I am not sure about this and I can't set back a restore point from the time everything was still functioning okay because windows deleted most of my restore points (I read windows can do this when the designated memory for restore points has been used totally).

So, no drivers changed, no dongle changed, probably no windows update, and so on.
This problem happens when playing mpg-files, also with files months older than this problem.
I tried another driver (and the registry fix, including reboot), took the power off the MVP, reinstalled 1.3.11 (1.3.7 was installed at the time the problem started). Since the problem also exists with older files which have never had this problem, I don't think it's a timestamp problem.


In the log I read this, which seems to reflect the problem
(Skip forward 1=60s, skip backwards 1=30s):
...
Skipping forward: 2 (yes, I pushed "2" and "skip forward")
MVPSetPlaybackPosition() request to set position to: 125 seconds
...
Skipping forward: 3 (yes, I pushed "3" and "skip forward")
MVPSetPlaybackPosition() request to set position to: 310 seconds
...
Skipping back: 6 (yes, I pushed "6" and "skip backward")
MVPSetPlaybackPosition() request to set position to: 1 seconds
...

3 forward, followed by 6 backwards should be the same position ("125 seconds"), but it's not ("1 seconds").


Logs attached. Please help.

Hi,

Just wondering has anyone experience of the Intel CE9500 DVB-T sticks. I bought one from ebay for £10, and as expected it was too good to be true. It's a DUTV005.

When first plugged in, it finds Intel BDA drivers from Windows Update. These don't work at all in GBPVR or ProgDVB, the channel scan just wizs through and doesn't detect any signal strength.

I cracked it open and found the chipset to be CE6230. I installed the CE6230 BDA drivers and now ProgDVB and GBPVR can detect signal strength, but are unable to detect any channels.

For £10, I'm willing to chalk it up as a waste of time. Just wondering on the off-chance has anyone got one and got it working? It looks like this:

https://www.abclinuxu.cz/images/screensh...-54005.jpg

Any recommendations for a cheap DVB-T stick. I have two Hauppauge ones, but the price of these seems to have gone way up. I know you get what you pay for, but I don't want to spend a lot of money .

Thanks

I've had a virus infection and have had to repair windows (xp). My GBPVR installation seems a little messed up now. When I click on PVRX2 or Config nothing happens... attached are my logs. Any ideas?

http://www.thinkgeek.com/computing/keyboards-mice/9836/

Quote: Product Features

• Revolutionary Keyboard Features a tiny OLED screen on each key. 113 screens total.
  
• Each key can be individually programmed to perform a series of functions, open an application or run an Applescript (Mac only)
  
• Various System Monitor functions can dynamically display on a key including CPU usage, CPU temperature, Network Speed, and Memory Usage
  
• Play a GIF animation or Quicktime movie on a Key
  
• Paint images across all keys at once in your image editor of choice
  
• Key sets can be linked to an application, so whenever you open that app the appropriate keys come up
  
• Powerful layer function allows you to combine existing key sets in different ways
  
• Use any language with the appropriate key images including Cyrillic, Ancient Greek, Georgian, Arabic, Quenya, and Hiragana.
  
• Display notes, numerals, special symbols, HTML codes, math functions or any other special symbol.
  
• Any key (or to be exact, a unit consisting of a cap, a microchip and a display) can be easily removed by hands to be cleaned or replaced
  
• Built in USB hub
  
• SD Card Slot for Storing keyboard Settings
  

Hello,

Right now I'm using mc2xml instead of tvxb. I'm very happy because is simple and fast!!!!!!!. Just a thing... Is there a way to sort the output. I've tried ordering with channel file unsuccesfully.

Thanks a lot.