I'm still confused about the 2250's ability to watch and record 2 analog channels....
Can I connect my local cable provider's coax cable (non digital, no cable box) to the 2250 via the analog input and map certain channels (cbs,nbc,abc,fox) as an analog recording source and then connect my Dish Network STB to the 2250 by the s-video input and map the rest of the channels (execpt the above listed channels) as another analog recording source and watch a channel from the STB while recording a channel from the cable provider?
My current configuration is a pvr-150 connected to the STB by s-video, GBPVR and IR blaster to control the STB, which works great....But I want the ability to record from the cable provider (reliable, but not the best quality), but I want to be able to watch the STB also (not reliable, but great quality)...
I know I can add another pvr-150 and do this but I'm trying to combine both into 1 slot...
On our new PC ( Intel Q6600 CPU, 4gb Ram now running Vista ) I had
installed a KWorld DVB-T PC 160 TV Tuner . This works fine on Windows
Media Centre but after around 3 - 4 hours it stops and gives the message
' No tuner installed.! '
Restarting the PC usuallysorts it out but obviously it's
no good to leave on to record progs.
Thinking of using up to 3 of the Hauppauge 2250 tuner cards, but want to make sure GBPVR can support them all at once. Looks like my current MB only has 2 free PCIe slots, but might replace it to go all 2250s. Just nice to not have to mix drivers.
Might go with a couple 1600s if need be. Just want to get up to being able to record at least 6, 8 prefered, shows at once with at least 4 HD tuners.
Super Easy Deployment of a Plugin
The Batch-Installer.exe program is a GUI to launch 2 BAT files and show Screenshots, a Readme files and optionally a HTML page. It is really easy to use this method to install files into a GBPVR Installation.
Just put the files you want to install into the {InstallDir] sub folders.
All Files in the [InstallDir] folder tree will be X-Copied to the GBPVR Installation.
Edit the PluginName.BAT files at the line âSet PluginName=âYour Plugin and Skin Nameâ, so the Plugin directory will be removed upon UnInstall.
Rename the file Readme.Batch-Installer.rtf to your own *Readme.âYour Nameâ.rtf and it will be shown in text window.
Batch-Installer program and usability
The Batch-Installer method can be used to install almost everything into your current GBPVR installation.
Install Plugins
Install Utility Program and Plugin Patches
Install Windows Services
Stop and Start Windows Services
Channg Values in Config.xml or other XML files
Start Programs from BAT file and have the BAT file to continue
Install Complete Skins
Install Plugin Skins
TV Channel Logos
Radio Channel Logos
If i understand correctly you can use GBPVR as a streaming server? I have seen mention of using pvrx2 as a client as well. I would like to try to do this but it seems i cant find a clear cut explanation of the process. I f someone could explain how i might accomplish this or let me know that i am incorrect in my assumption i would greatly appreciate it.
Has anyone had problems receiving TVNZ FreeviewHD programmes over the past week?
TV3 seems fine but getting TVNZ channels both on LiveTV and recording seems hit and miss over the past week.
I had no problems during the Olympics but noticed it last week when I couldn't get TV1 for the elections. And yesterday it recorded a 5GB unwatchable file for Mission Impossible on TV2.
I also upgraded to 1.3.7 last week but I'm not sure if it's related.
Posted by: hawa - 2008-11-12, 08:19 AM - Forum: Hardware
- No Replies
Hello All!
I have a freshly installed PC with Vista Ultimate 64 bit. I am new to GBPVR and just installed it. My problem now is that I cannot seem to find the tv-card.
I have put the patch dll files from the sticky on and that seems to help alot with the searches.
I cannot download off isohunt, it now returns what seems to be the best results but after selecting the file for download and then looking at the torrent filelist it doesn't appear. I have just tried with TPB and that is downloading the file different source with less seeds however :-(
Does anyone know if / how to configure PVRX2 to delete two (or more) files from the recording menu when the files are different formats of the same show.
Background: I record all my shows in MPEG format and convert each to a AVI (for the playback in the kids room) but I'm not deleted the orginial file.
eg I record Bones I'll get
Bones_Man_In_Well.MPG
Bones_Man_In_Well.AVI
When I select delete within PVRX2, the system deletes '
Bones_Man_In_Well.MPG'. Can I change it to delete all files with this filename eg
Bones_Man_In_Well.*
I'm currently having to manually delete files via the video menu but it's not ideal as I'm having to confirm each file and it a pain.
I've been reading this forum for a while getting GBPVR setup with a new box in my living room. Have got everything working nicely except for the Hauppauge IR Blaster changing the channel on my Sky Digital (New Zealand) set top box.
I have the 45 button Hauppauge remote with the PVR150. I have the channel changer plugin set to .exe channel changer in the GB-PVR config app, and the IR blaster flashes to indicate a code is being sent, but the Sky box does nothing. I've read on these forums that the blaster is weak and needs to be placed very close to the receiver on the STB - I have tried all sorts of positions but nothing seems to work.
Can anyone shed any light? Is there a way to confirm the blaster is sending the correct information? I have a Motorola DTH-335 Sky decoder.