I recently loaded up XP Pro SP2 on the HTPC. Basically the HTPC runs GBPVR and gets the schedule info from Schedules Direct. I occasionally will check my email via mail2web on it and check in here with it.
I've been working some overtime so I haven't been home as much as normal.
This morning I booted the machine up and got an icon in the system tray that said the computer was infected and to click there to fix it, and of course it was a trojan giving a false warning. It was "XP Antivirus 2009". I found some software to remove it and things seem well, for now.
I'm not sure how this got loaded onto the machine - none of my kids will fess up to using it, so I dunno if one of them used it and visited a site they shouldn't, or if the thing just "found" my computer sitting relatively unprotected on the net and installed it's self.
I do have Windows Defender running and Windows Firewall, and I upgraded to SP3 but that's it. I basically didn't want to load it down with a bunch of stuff when it's just going to be recording TV and updating the TV Guide.
Sooo, the question is - how safe is the HTPC sitting on the net? What protection programs work well with GBPVR? Any other measures anyone would care to share I'd appreciate!
Also . . . I have a 700gb Seagate SATA drive right now, but I also have an unused Western Digital 40gb ide drive - should I install it and load the operating system and programs on it and just use the SATA drive for data storage?
Any thoughts, comments, etc. would be much appreicated!
I use a Compro S350 card which doesnt scan very well with GBPVR.
I have managed to format a file Martint123 uploaded a while ago from DVBViewer, and believe it wouldnt take much more work to convert to import straight into GBPVR.
Question is how often is a scan generally required, the cost of DVBViewer is only 15 Euros, but if I dont need to scan again then might not be worth it, but do I need to scan monthly for any reason?
I have gbpvr running on my HTPC and i am trying to watch streaming video from my desktop. I am able to get the menu on my desktop but when I choose a channel i get a black screen and the PVRX2 app on my desktop hangs.
if i look on the HTPC i can see mpg files are being created for the channel that i have selected to record/watch.
I have the firewall disabled on both machines.
I have tried all of the MUXes on the HTPC (Microsoft, MainConcept, TS, Full TS)
I have attached the LOGS directory form both machines.
I went away for the weekend and all the recordings I scheduled didnt happen. They were not even in the recordings menus and marked failed ..just not there, I dug through the logs and found this, any clues as to what can cause this?
Code:
2008-10-18 17:54:00.187 INFO [5] Found new programme requiring recording: Merlin (180)
2008-10-18 17:54:00.187 VERBOSE [5] Changing to channel (GBPVR.Backend.Common.NullTunerController): 0
2008-10-18 17:54:00.234 VERBOSE [5] Requesting IRecordingSource to start recording: F:\Video\Recordings\Merlin\Merlin_20081018_17551840.mpg
2008-10-18 17:54:00.234 VERBOSE [5] BDARecordingSource about to start recording oid:5 channel:T read or write protected memory. This is often an indication that other memory is corrupt.
at FindFilterByName(Char* decoderName)
at NativeUtilities.BDARecorder.StartRecording(String cardType, Int32 board, String filename, IntPtr hwnd, ChannelTuning channelTuning, Int32 lnbLOF1, Int32 lnbSwitch, Int32 lnbLOF2, Int32 diseqc, Boolean powered, Boolean previewMode)
at NativeUtilities.BDARecorder.StartRecording(String cardType, Int32 board, String filename, IntPtr hwnd, ChannelTuning channelTuning, Int32 lnbLOF1, Int32 lnbSwitch, Int32 lnbLOF2, Int32 diseqc, Boolean powered)
at GBPVR.Backend.Common.BDARecordingSource.startRecording(IRecordingSourceConfiguration config, Int32 qualitySetting, String filename, ChannelTuning channelTuning, Int32 minutes, Boolean useStreamingEngineIfAvailable)
at GBPVR.RecordingService.x93f60a55016d55c4.xcba1f05fb5a46d5f()
2008-10-18 17:54:00.937 VERBOSE [5] RecordingFactory.getExtrasForGroup(7)
2008-10-18 17:54:01.140 VERBOSE [5] RecordingStatus is now RecordingStatus.RECORDING_COMPETED
2008-10-18 17:54:01.140 VERBOSE [5] RecordingFactory.save()
200
I have a new powerful machine which has been working with GBPVR for the last 6 months without a problem.
Last week I got a new Samsung Spinpoint 1000gb SATA HD. Being SATA of course I just plugged it in and formatted it in windows. That all seemed to go ok. I then copied my media over on to it from the old full drive (250GB IDE drive).
Then rebooted (now 10000 times after playing with services safemode, reinstall GBPVR etc). After rebooting the speed at which the .avi converts is slower than the speed the MVP plays. So ffmpeg is not converting fast enough and writing the xxxxxxx.mpg cahe file fast enough. When I map back to the old drive and run the same file. ffmpeg converts and saves at the lightning speed - about 1m20 after 20 seconds if not more.
So why wont it do it on the bigger, new, newest technology HD? What am I doing wrong.
Is there a bios setting? something is not right! The new super duper hd is useless.
I have 3 HDs.
C: is a Seagate SATA 160gb used for windows and programs and contains GBPVR
D: is a DVD RW. IDE old syle burner
E: is the old 250 GB Seagate IDE drive where the media is stored and works perfectly.
F: the new new super dooper 1000GB Samsung - which is not working with GBPVR or rather ffmpeg.
I dont have RAID setup and I downloaded the latest bios and have reset it to factory default. No overclocking etc.
I have an E8400 3gig duo CPU, 4gig ram etc. Motherboard is a Gigabyte GA-P35-DS3P with one IDE slot on it and like 8 SATA slots.
The grid does not change ... still displays two hours. The short skip jumps forward three hours.
Is it me? Have I missed something?
Thanks for all the good work on this plugin.
Graham
Edit: I lied. The grid is displaying three hours of shows ... but the times at the top are still showing two hours.
For example, the grid displays displays shows from 2000 - 2300 but the times shown along the top of the grid are 2000, 2030, 2100 and 2130.
Edit 2: I guess that this is to do with ...
<CompositeImage name="TimeLine" size="100,4">
and
<DrawText text="@time1" loc="15,5" size="20,90" textStyle="ListingStyle" align="Left" valign="center"/>
etc
in the skin file.
I'm preparing to build a PC that will not be the main GBPVR recording server, but will stream Live and Recorded shows to it. I'm already doing this with older hardware, but this machine will be new and used more. I've picked out a barebone kit and the only concern I have is the onboard video. I know onboard video has usually been low end in the past, so I just want to ask around to see if this onboard chip should be able to keep up with HD OTA at a res 1080.
The shared memory concerns me, but the FSB will be running at 1066 or 1333.
The throughput of the chip seems to be good to. Link below.
Anyone else using this chip?
FYI, this is the barebone kit. It does not have PCIe, so the onboard video is the best option. There is a higher end Shuttle with PCIe that I can choose should I need it but I'll have to determine this before purchase