1. do you need more than one tuner card to be ale to watch a show and record another?
2. Or is it possible to do this with one tunercard?
i have available 2 pci slots left
my current card "ATI TV Wonder⢠HD 650 Combo PCI Express" is taking up a pci express slot.
3. if i got a "ATI TV Wonder⢠HD 650 Combo PCI Express" i guess thats the same as mine but on a pci slot, then do you have to run another cale to the input of that card also?
I guess what im asking is at the main cable coming out of the wall, would i have to have a splitter and split the one main cable to 2 cales to feed each of the input? or is the fact that there is signal to only one card ok and the 2nd tuner card can get the signal through the motherboard or something weird like that?
Thanks In Advance
PS, if thats the case and you need more than one card, since the card is only $140, should I just buy 2 and flll the slots up and be able to record 2 shows and watch on one - if that was the case and you needed more than one.
This may seem like a real stupid question and I appologise if that is the case. I've got Freeview terrestrial working well in NZ but I also have a Sky dish that I was wondering if I could use.
Can I assume that without a Sky decoder box, I wont be able to get any channels off this dish? Or are there freeview ones available by just plugging the dish directly into my HRV 4000?
How about if I opened an account with cky to get other channels, would I still need the sky decoder or would the 4000 do that for me?
Again, sorryf or the newbieness of the question, still trying to get my head around the whole setup!
just wondering, for NZ Digital Freeview, Which vedio decoders are people having the most sucess with? Some that I have tried give very jerky pictures while athers are far smoother but dont play things like animations on TV ads very well.
Currently I'm using the Cyberlink decoders for the digital and high def stuff.
Anyone got any suggestions as to the most sucessful solution?
I'm just posting this in case someone runs into this before the next release of GB-PVR that is supposed to support the new Hauppauge beta drivers w/AC3 sound.
My HD-PVR was one of the early ones that suffered from overheating. I just had it replaced. The service was excellent from Hauppauge and my only complaint is the replacement they sent was TOO NEW! They sent me the Rev. D model (4901 INF). The problem is that the release 1.0b drivers don't support it! Per Hauppauge tech support, I need to use the beta drivers to support this new rev.
GB-PVR would work with the beta, but with no sound. Sub explained to me the issue was the beta drivers using AC3 audio and not AAC. AC3 support will be in the next release of GB-PVR. I resigned myself to watch TV with the TotalMediaExtreme software that came with it until then.
However, I discovered that if click Recording to watch the live TV preview, their are a couple of settings buttons. One of them allows you to toggle AC3 vs. AAC sound. Once I switched to AAC, exited the program, and fired up GB-PVR my sound returned!
This "trick" won't survive a reboot, you'll have to do it again if you power off your computer. But, if you're "lucky" like me and get a new rev, you can at least use this workaround for now.
Of note, there is also a setting in that program to disable what they call the "Bling LEDs" (the bright blue LED on the HD-PVR that lights when in use). Since my HD-PVR is right next to the TV, I find I like this bright distraction off in the dark room. I don't know if sub would see fit to make an option to toggle that in GB-PVR too since it can be done. Maybe I'll add it in the wishlist forum...
I just bought a PVR-500 mce and it's on it's way to me.
I currently have a PVR-150 that I'd like to keep along with the PVR-500. My motherboard is an Asus M2NPV-VM with two pci slots so that should be possible.
What do I need to do to use the new card once it arrives? Install it and reinstall the driver? Rerun the GBPVR config? Or ???
Thanks!
Can't wait till it gets here - one tuner just aint enough!
I am on the west coast of the U.S., and I can't get any of the local channels on DN 110 transponder 12268. In fact, I can't detect 12268 at all, whether I user GBPVR, DD, or MT.
Just after I started Firefox and went to the GBPVR home page, I got a message from Norton Internet security in the corner from the taskbar a message something along the lines of Bloodhound.Exploit.196 has been detected.
Here is the info about it on my computer, looks like it has been removed.
1. Is there any way to stop a recording ? Once I set one up I can't tell how to stop it and when you try and move away from a channel that is recording, GBPVR won't allow you to watch another channel, without stopping the recording.
2. Is there a way to tell what is recording ? I don't see an indicator on the guide that shows me what channel is being recorded.
3. If you are using an XMLTV grabber to get guide data but in the GBPVR you have already mapped sat channels to the EPG, is there a way to only import those channels to the guide. Right now, the entire channel list of the XMLTV file gets imported into the guide and it's causing an issue because not all of those channels were scanned.
4. There is no listing for the Zap Stream IR Remote control that I use with my SageTV setup, is there a special driver for that or do I need to explore other remote options ?