I never use the transcode option but tried it tonite setting it to transcode to xvid. After the recording completed, I can see and hear my system 'get busy' but I can't find the file. I don't even see where the default saved location is and a search of my system yielded nothing as far as I can tell.
So, though I assume it worked, where might this file be automtically saved?
thanks
i'm trying to use the "-import:filename" new command but it balks at anythign i try..
tried "-importhow-dump.xml" and -import:"show-dump.xml" and just plain old -importhow-dump.xml but nothing seems to work...what am i doing wrong?
i have been trying for weeks to get this software to allow me to watch hd clear qam with my hauppauge 2250. suddenly a few nights ago i got a security error.
logon process has failed to create the security options dialog
i haven't done anything else new to it really other than mess around with gbpvr installation. i also can't get my computer usable again because of whatever this problem is. it takes about fifteen minutes to boot up, when it does boot up. after that, everything is so slow i can't actually run any software before it eventually freezes on me.
thanks for any help here. once again my $4500 new build is useless...
I know transcoding from DVR-MS is a two step process, but my current install seems to be stopping after creating the first step; sourcename-temp.mpg file.
I can then manually select the -temp.mpg file and transcode to divX or whatever without any problems. I was just hoping to streamline the process.
The convert log doesn't seem to show any errors. (attached)
i have gbpvr 1.2.13, everytime i try to open picture library it looks like it is going to open the it goes right back to the main screen. It definatly used to work but Im not sure exactly when since I dont use it frequently. I have deleted and readded the path to the picture folder. It is on a network share but I can browse to it manually using windows explorer. I have attached my log files. I wasnt sure which ones so i attached a few of them
I have spent some time poking around trying to find info on HD. I know other noobs like myself have the same questions so...please answer the questions below more experienced users and other noobs feel free to add some more questions.
(I know these answers can be found with some digging, but a centralized post would be more effective for noobs looking to make the HD jump)
Here are some questions to get started:
I go thru the local cable/satellite company for my television. SD is a snap with GBPVRs easy setup, now I would like to make the step up to HD. So my first step is to call the cable company and upgrade my package to HD. That being said, and the new HD cable/satellite box(s) delivered to my house...
1)What are my options for setups in terms of hardware?
2) Best capture cards for HD?
3) What is OTA?
4) What is QAM?
5) If i have an HD receiver box from my tv company, which signal am I using?
6) Is the PCH a viable option? What are its strengths and weaknesses?
7) Is the HDHomerun a viable option? What are its strengths and weaknesses?
8) Where is the best place to purcahse these items?
9) Lets assume I want to build a setup with 3 tuners capable of both HD and SD, if i build from scratch what am I looking at monetarily?
10) If I am capable of following instructions on this forum, where is the best place to start setting up and codec/decoder issues with HD?
11) What are the minimum specs for a system with 3 tuners capable of receiving/recording HD and SD?
12) If I would like to run a client like the PCH or the MVP, does this change my minimum system specs?
13) Using schedules direct, where is the best place to start on this forum to get all my HD and SD channels setup correctly in the guide?
14) Assuming all parts are at hand, what is the estimated setup time for a basic HD capable system? A system with multiple tuners?
Thank you for any input and answers you all can provide. I am just trying to make this topic a good place to learn and accomplish those HD dreams.
I'm asking myself if anyone would be intersted in a wikipedia plugin too. I think thats one of the plugins that can boost gbpvr up. I have started a little investigating the wikipedia interfaces, but to be realstic, I can spend so less time in it that the alpha release would be not be ready until 2020.
So I would like to ask if someone would be interested in sharing this project, regardless of your skills. I would suggest to start a sourceforge project.
Hi Everyone,
Has anyone got this card to work?
Digital or Analog,Analog Preferred.
With Plugins,codecs,or whatever.
This is my last Ditch Attempt.
Sub was kind enough to help me this far.
Any help would be Greatly Appriciated.
Greyfoxx
As a noob to this side of computing, what would you recommend as the most stable, sure-fire, idiot resistant, high performance HDTV streaming hardware/software solution? After building a couple of these rigs, I imagine that you guys have pretty much narrowed the real set of criteria to create a quality playback/record/stream system, as well as finding and avoiding the junk and the under powered, low performance items. Thoughts...?
Jeff
Hello,
I've purchased a Hauppaugge HVR-1950 and I've installed GBPVR 1.2.13 on a laptop with 1.5ghz core2duo, 1.5gb ram, running Vista. In Config, when I'm attempting to set the capture source, I don't see the HVR-1950 listed as one of the devices.
So I added the following to my direct.ini
[Hauppauge HVR-1950]
INIT_MODE=ECP
INIT_MSP=0
SUPPORTS_FM_RADIO=0
BLACKBIRD=1
CONEXANT=1
FILTER_CROSSBAR=Hauppauge HVR USB2 Crossbar
FILTER_CAPTURE=Hauppauge HVR USB2 Video Capture
FILTER_TV_TUNER=Hauppauge HVR USB2 Tuner
FILTER_TV_AUDIO=Hauppauge HVR USB2 TvAudio
FILTER_ENCODER=Hauppauge HVR USB2 MPEG Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_I2S_OUT=I2S
PIN_CAPTURE_656_OUT=656
PIN_ENCODER_I2S_IN=I2S
PIN_ENCODER_656_IN=656
PIN_ENCODER_OUT=MPEG
PIN_WRITER_INPUT_IN=Input
So after that change, when I attempt to add a capture source and I select the Capture Card Type and use the checkbox to Show Devices installed on this machine, I see the HVR-1950 listed. I set this up with the Composite setting (there are 3, I tried all three). I have the HVR-1950 connected via composite to my STB.
However, after selecting that type I don't see to have success with getting LiveTV to work. Rightclicking on the system tray icon for gbpvr and then going to status show the capture sources as "sleeping".
I know the device works as it seems to be fine with WinTV.